1 In Sliding Screen Door Tension Spring With Concave Rollers 2 Pack Primeline B 541

Silver

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is a tension spring roller assembly, with a downward offset tension spring used by Academy and a variety of other sliding patio door manufacturers. The B 638 roller is a 1 Inch high-density polyethylene roller, the B 687 roller has a plastic ball bearing and the B 639 has a steel ball bearing roller with a 1-3/4 Inch long tension spring that is a heat treated steel spring. When installed the bent, or angled, flat spring positions the roller assembly so that an adjusting screw adjusts the height of the roller as needed. For stainless steel roller assembly use Prime-Line part B 756. Order yours today and have your door slide like new.

Anonymous. Tue May 06 2025

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is an Arcadia style roller assembly used by Arcadia doors as well as a variety of other sliding patio door manufacturers. This is also currently a very popular design amongst patio door manufacturers in today's market place. It has a wire tension spring and comes with a 1-1/4 Inch diameter high density polyethylene roller and fits onto the Prime-Line part B 569 corner insert (sold separately). It is often used on the top as well as the bottom of the sliding screen door. Also look at Prime-Line parts B 515, B 610, B 714, B 736 and B 821 for similar spring tension rollers. Order yours today and have your door slide like new.

5.44" H x 3.82" W x 1.13" D, Zinc Plated

This is a combination of a 1-1/4 in. diameter nylon concave ball bearing roller that is 5/16 in. thick with a 1/4 in. axle hole and a combination of five different axle choices. Depending on the situation, you can choose to rivet the roller into place or use a rolling pin, drive pin, binder post, and screw or bolt and nut. Regardless of how you need to install the new roller into your existing roller housing, in most cases, one of the five choices will work.

worked well. Katharine. OR. Tue Mar 04 2025

White

This screen door tension spring is constructed from steel. It features an adjustable 1 in. ball bearing center groove wheel and is heat-treated. A variety of glass door manufacturers use this type of tension spring.

Nickel Plated, 16.35" H x 1.5" W x 0.45" D

These Handyman Single Loop Closed Extension Springs are constructed of durable spring steel, and they come finished in a beautiful, corrosive-resistant, nickel-plated finish. Springs like these are used for a variety of household and professional applications, and they feature a generous deflection length of 22 inch. These springs are easy to install and are used by many. The outside diameters, lengths and gauge thicknesses vary between each of these springs, while their dependability does not. Use these springs for repairs around the house, in the office, vehicle, garage and in many other applications.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This sliding screen door roller assembly insert has a high density polyethylene frame with an adjustable high density polyethylene inner housing and high density polyethylene roller. The assembly inserts into the bottom or top of the sliding screen door by snapping it into place. Roller housing adjusts to the correct position needed. This style is found on Columbia sliding screen doors, but is also used by a variety of other screen door manufacturers. Order yours today and have your door slide like new.

Black

Convert your hinged door into a self-closing door with Prime-Line safety spring door closer. This surface mounted door closer installs in minutes! Use this spring door closer on doors that weigh up to 150 pounds These closers are not handed, so they can be used on both left and right-handed hinged-swinging doors. The door closers feature an adjustable closing force and speed. Constructed of diecast materials with a white painted finish, this safety spring door closer can complement any style door. Each closer is U.L. listed with a 1/2 hour fire rating. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point of where it makes contact with the bullet-shaped housing of the closer. All fasteners and installation instructions are included with this item. For lubrication, avoid using WD-40 which actually breaks down lubricating grease. Instead, apply white lithium grease to internal compressing springs if desired or necessary. Other colors/finishes include: Black, brown, chrome plated and satin chrome plated. For a rust and weather resistant closure, consider model numbers KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. Do not overtighten, turning past 4 hole positions will cause this item to fail.

greagt. Stan. Bentonville, AR. Wed Jul 16 2025

White

These safety spring-activated door closers are constructed of diecast materials and come in a beautiful finish. They are U.L. listed with a 1/2 hour fire rating and can be used to close doors weighing up to 150 lbs. These closers feature an adjustable closing speed and they are non-handed, allowing them to be used on both left and right-handed swinging doors. Both the closer and the plastic slide plate are surface-mounted and are easy to install. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold-open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point where it makes contact with the bullet-shaped housing of the closer. For a rust and weather resistant closure, consider Prime-Line parts KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. All fasteners and installation instructions are included with this item. Other colors/finishes include: black, white, brown, and chrome plated. Be sure to view the manufacturer’s How-To Installation Video also linked to this page, in the upper left-hand corner. Application of white lithium grease to internal compressing springs may be desired, but you should avoid using lubricants like WD-40 which breaks down lubricating grease. Do not overtighten, turning past 4 hole positions will cause this item to fail.

Looks very good construction.. O. Etobicoke, ON. Tue Jan 31 2023

This is a side mounted, top hung wardrobe roller assembly with a tandem 7/8 inch convex nylon wheel for the front sliding wardrobe door. The stamped steel bracket assembly is adjustable and has an 1/4 inch offset. It is fitted onto the wardrobe front door and fits 3/4 inch to 1-3/8 inch thick doors. Used by Acme and Stanley door systems, as well as a variety of other wardrobe door manufacturers. For the back wardrobe door roller assembly use Prime-Line part N 6503.

This patio sliding screen door grille is constructed of aluminum and comes in a white painted finish. The grille is designed to install on the exterior side of 48 in. Wide sliding screen doors to provide child safety, and protect the screen fabric from pet damage. This screen door grille measures 26 in. Tall, and with the fasteners and installation instructions provided it is simple to install. This maintenance-free grille is constructed of superior quality using close weave aluminum mesh supported by strong, extruded aluminum frame material in an attractive styling.

High quality screen door grill. Had to trim mounting tabs on one side to allow the screen to fit into the frame recess.. Edward. Meadow Vista, CA. Sun Jun 22 2025

This flat edge sliding window roller is constructed from nylon. It comes affixed to a nylon housing. This style roller fits on Guaranteed Products and other similar styled sliding windows.

This is a combination of a 1-1/8 in. diameter steel concave or grooved ball bearing roller that is 5/16 in. thick with a 1/4 in. axle hole, and a combination of 5 different axle choices. Depending on the situation, you can choose to rivet the roller into place or use a roll pin, drive pin, binder post and screw or bolt and nut. Regardless of how you need to install the new roller into your existing roller housing, in most cases, one of the five choices will work.

Satin Nickel, 48" H x 3" W x 0.5" D

This bottom track is constructed from roll-formed steel and comes finished in champagne gold. The track can be used for new installs, or to replace missing or damaged bottom tracks of by-passing mirror doors that use convex edge mirror door roller assemblies. They feature a double-grooved track as used by a variety of mirror door manufacturers, and can easily be cut for custom installs. These replacement tracks are sold individually and the installation fasteners are not included.

It was the correct size and fit beautifully. Wheel’s on the closet door slide beautifully on the track Price was great and I love Wayfair Thank you. Carol. Wed May 14 2025

This Chain Door Lock is constructed of steel components and comes in a beautiful, corrosion-resistant, classic bronze finish. Typically these are used on inswing doors that you may want extra security on. With this door guard properly installed you can safely and securely either vent the room or open your door slightly. All the necessary mounting hardware is included for a quick and easy installation. Additionally this can be used as a child safety lock if mounted high enough for your child to not be able to reach.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This high-tension steel spring roller assembly fits onto the Columbia Uni-Fit series door. This roller assembly has a 1-inch diameter high-density polyethylene roller mounted in the housing. The flat steel spring end catches onto the inside of the door frame while the flat edges of the two tabs extending out in front of the roller restrict the roller from retracting too far up into the door frame as it rolls. This sliding screen door roller assembly insert has a thinner high-density polyethylene frame than the Prime-Line part B 646. It has an adjustable high-density polyethylene inner housing and high-density polyethylene roller. The assembly inserts into the bottom or top of the sliding screen door using the included screws. The roller adjusts to the correct position needed. This style is found on Columbia sliding screen doors but is also used by a variety of other sliding screen door manufacturers. Please note the dimensions and design when compared with an old roller. Order yours today and have your door slide like new.

Gray, 30.13" H x 3.75" W x 1" D

This Prime-Line Adjustable Sliding Door Lock features a telescopic design that allows it to adjust to fit nearly all standard patio door openings. The lock bar is adjustable to accommodate openings from 28 inch to 48 inch Secure your door in an open position, so you can safely allow fresh air into your home. When not in use, simply swing the metal security bar up and out of the way. Unlike typical patio door patio door lock bar, this door lock stick does not require you to cut the unit down to size with a saw. You simply press in the tension release clip to extend the length or reduce the length. Constructed of aluminum with an aluminum finish, the patio safety bar prevents doors from being forced open. Please refer to the line art drawing for dimensions and compare to your needs before purchasing.

Perfect for securing my sliding glass door. Glad I found it.. Carolyn. Louisville, KY. Fri Feb 20 2026

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This stainless steel housing and spring-loaded arm with the 1 Inch stainless steel roller attached is used by Bay-Mills as well as a variety of sliding screen patio door manufacturers. The roller arm is spring-loaded and adjusted by the adjustment screw on top. Order yours today and have your door slide like new.

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

It does the job. It is kind of heavy, but it is effective.. Tiffany. Cocoa, FL. Wed May 28 2025

This guide is constructed from nylon. It features a spring-loaded, self-adjusting, top mount design. It fits a 1 inch to 1-3/8 inch thick bi-fold door up to 30 pounds each.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This spring tension roller assembly is used by DorWal, Guardian as well as a variety of other sliding patio door manufacturers. It has a flat tension spring, steel housing and a 1-1/4 Inch high-density polyethylene roller. The roller installs into the door by snapping onto the existing diecast door frame corner. These can be used as top or bottom rollers. Order yours today and have your door slide like new.

Silver, 5.7" H x 3.75" W x 1.05" D

These chain door guards are constructed of steel chains, diecast housings, plates, and keepers, and they come in optional plated finishes. These locks engage by allowing the bolts to slide into the keyed mechanisms to lock. They use B1 keyways, ILCO (1098M). These chain door locks allow doors to open only slightly for safe viewing and ventilation. Installation of these locks mounted out of children’s reach will help prevent them from opening doors to enter or exit into dangerous or off-limit areas. All installation fasteners are included, and the locks can be used on a variety of door types, on or beside the door casings.

Very nice looking and useful key system to setup child lock even if you are going out.. Anonymous. US. Wed May 17 2023

Prime-Line D 1579-C Sliding Door Repair Track is designed to restore smooth operation to worn or damaged sliding track systems on aluminum doors. This replacement door track cap slips over existing damaged tracks, providing a simple and effective solution to prolong the life of your sliding door. Built to last, the patio track is made of high-quality stainless steel for maximum durability and rust resistance, ensuring long-term performance. Simply prep the existing door tracks, apply a thin bead of silicone glue, and snap the repair track into place using a rubber mallet and block of wood for a secure fit. Each replacement sliding track measures 3/16 inch x 48 inch x 1/4 inch and comes in a convenient 2-pack. For further dimensional information, please see the line drawing before purchasing.

Fit perfectly!. Gordon. Sat Apr 11 2026

This is a sliding glass door roller assembly. It has a 1-1/4 inch outside diameter. Features a steel ball bearing roller with an adjustable diecast housing.

This operator cover is constructed from diecast Zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

1/2 in

This is a shower door bottom seal that is constructed of clear vinyl and comes in 36 in. lengths. Designed to attach to the bottom of frameless, swinging shower doors without the need of adhesives. Cutting down to size will be necessary if your shower door measures less than 36 in. in width. No tools are required to install this shower door bottom. For an alternate design, please review the Prime-Line.

what I needed, Solved my problem, I need receipts for the items that I purchased where can I go on line to print them out Thank You. Daniel. Martinez, CA. Sat Feb 21 2026

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. single cylinder deadlock in a white painted finish.

This 1/2 inch steel roller comes secured in a nylon constructed housing. These rollers install two per track and help keep your windows energy efficient. Used on Superlite series 8000 windows.

This is a horizontal nylon roller guide used on Peachtree Citation 3 patio doors. The roller is installed onto a square bracket design that sets into the top rail providing a firm installation. It is then held in place when the corner screw passes through the nylon mounting bracket of the guide. The roller guide keeps the door centered in the overhead frame providing a smooth operation.

This is a front and back roller for the wardrobe door. It has concave rollers. Used on older Kenna frame sliding closet or wardrobe doors.

2.94" W x 0.22" D

These window screen tension springs are constructed of heat treated spring steel and come in a zinc plated finish. Tension springs of this style mount onto the sides of aluminum screen frames and provide holding tension when inserted into sliding window screen channels. These tension springs will fit into 5/16 in. or thicker screen frame material. Requires two 3/16 in. holes drilled into the screen's edge for installation.

This is a white plastic roller assembly. The roller is made of brass flat edge and is most often used by Elco, Better- Bilt Aluminum, and a variety of other manufacturers.

Upgrade your sliding doors with this back mount tandem roller assembly, designed for Andersen wood patio doors and compatible with many other wood door brands. Two 1-1/4 inch concave steel ball bearing rollers ensure smooth, quiet operation, while the stamped steel housing with side adjustment makes precise alignment simple. Top insert points and side locking tabs secure the assembly for long-lasting performance. Perfect for DIY homeowners or contractors, this durable roller assembly restores effortless sliding and improves door longevity. Installation is easy with a standard Phillips head screwdriver.

Anonymous. US. Fri Apr 11 2025

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. single cylinder deadlock in a white painted finish.

perfect to upgrade the bifold doors I purchased.. Heather. Hendersonville, NC. Wed Dec 27 2023

Chrome

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is a tension spring roller assembly with an offset, or bent, spring design used by Academy, Metal Industries and a variety of other patio door manufacturers. The roller is a 1 Inch diameter steel ball bearing roller with a tension spring that is a heat treated steel spring. The bent, or angled flat spring installs into the screen door frame so that the roller assembly cushions the door as it rides back and forth. For high density polyethylene rollers use Prime-Line part B 609. Order yours today and have your door slide like new.

This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and long-lasting operation. The wheels are designed to glide on a single raised aluminum or steel track. This item includes only one roller assembly per package, but a total of 2 roller assemblies are required for each sliding door. These roller assemblies are used to repair patio sliding doors with missing, damaged or malfunctioning roller assemblies. Easy to install with a few simple tools. This style roller is used on Revco-West and similar styled patio doors.

This molded plastic screen door grille allows for maximum screen coverage on standard 30 in. to 36 in. sliding screen doors. Proper installation of the grille adds strength to the entire door and helps prevent screen fabric damage. The molded plastic grille body measures 26-1/8 in. wide x 20 in. tall. The tabs extend 4-1/8 in. and can be easily trimmed.

works well. Anonymous. Sat Apr 04 2026

The Prime-Line MP6649 sliding closet back door 3/8 inch offset door roller pair ensures effortless movement for your closet doors, providing a seamless sliding experience with durable, top-quality components. This closet door roller kit includes two 3/8 inch offset bypass back door roller assemblies, offering easy bypass of your sliding doors to ensure a perfect alignment. Built to last, the sliding closet roller kit features sturdy stamped steel brackets and roller wheels, ensuring reliable performance and long-term durability. Designed for straightforward installation, this roller guide kit comes with all necessary hardware, making it simple to replace or upgrade your sliding closet door kit with minimal tools required. The Prime-Line sliding closet door guide kit is compatible with most standard closet doors. For further dimensional information, please see the line drawing provided

This is a zinc-plated steel spring that offers positive tension adjustment for most storm and screen doors. All you have to do is turn the adjusting spring in or out of the mainspring to change the tension for a light or heavy door.

Good product. Thanh. Frederick, MD. Fri Feb 06 2026

These replacement hardware packs are for use when installing or repairing Prime-Line part MP4013 security bar locks, for patio sliding door security. All fasteners, brackets and miscellaneous installation hardware are included with this item. See manufacturer’s how-to video for detailed instructions, including how to install when the active panel slides on the exterior side of the home.

Works as advertised, definitely secures bar.. Carlos. Succasunna, NJ. Mon Jul 25 2022

This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and long-lasting operation. The wheels are designed to glide on a single raised aluminum or steel track. This item includes only one roller assembly per package, but a total of 2 roller assemblies are required for each sliding door. These roller assemblies are used to repair patio sliding doors with missing, damaged or malfunctioning roller assemblies. Installation easy to install with a few simple tools. Refer to dimensional line drawing to match product specifications. This style roller is used on Adore/Highlight and similar styled patio doors.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This is a tension spring roller assembly, with a downward offset tension spring used by Academy and a variety of other sliding patio door manufacturers. The roller is a 1 Inch high-density polyethylene roller with a 1-3/4 Inch long tension spring that is a heat treated steel spring. When installed the bent, or angled, flat spring positions the roller assembly so that an adjusting screw adjusts the height of the roller as needed. For stainless steel roller assembly use Prime-Line part B 756. Order yours today and have your door slide like new.

Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This insert style sliding screen door assembly has a high density polyethylene housing with a high density polyethylene roller insert. It is used on the Academy Uni-Fit screen doors. The roller is a 1 Inch steel ball bearing roller and is used on the top or the bottom of the door. Easy to install, by inserting into the open U-shaped frame and inserting the screw. For steel ball bearing see Prime-Line part B 624. Order yours today and have your door slide like new.

This is a white plastic housing with a concave steel roller. It features a two different height adjustment. Used by Alenco window.

This is a white plastic housing with concave tandem steel rollers. Used by a.b.c. Windows. A dual wheel upgrade to the prime-line part g-3038 improves glide and window performance.

Has the roller on your screen door damaged or missing? This is a roller is used on bottom mount installations. It is a 1-1/4 inch high density polyethylene roller with a 3/8 inch axle hole. The 1/4-20 x 3/4 inch carriage bolt inserts into the 3/8 inch diameter high density polyethylene bushing which allows the roller to turn on the bushing/axle smoothly. The carriage bolt is then secured in the bottom rail with a nut. Order your roller replacement now to repair your sliding screen door.

This is two piece roller assembly used on Ador Hilite patio doors. The outer housing is 5/8 in. wide, 31/32 in. tall with a 11/32 in. flare width and has two hook tabs on top. The inner housing holds a 1-1/2 in. steel ball bearing roller. Together, they create an adjustable roller assembly that hooks into the bottom door rail and then is held in place by a 1/4-20 machine screw placed into the back end.

This by-pass closet door repair kit includes four tandem roller assemblies constructed of stamped steel brackets and plastic wheels. One pair of tandem roller assemblies is for installation on the front sliding panels and have only a 1/4 in. offset. The other pair is for the sliding closet door panel that hangs on the rear track. The roller assemblies of this second pair have 1/2 inch offsets. Each roller assembly features 7/8 inch diameter wheels. The wheels have convex (round) edges and all are top hung, side-mount design. These roller assemblies are used on Acme and Stanley doors, in addition to many others.