1 1 4 In Sliding Door Roller Assembly

5.44" H x 3.82" W x 1.13" D, Zinc Plated

This is a combination of a 1-1/4 in. diameter nylon concave ball bearing roller that is 5/16 in. thick with a 1/4 in. axle hole and a combination of five different axle choices. Depending on the situation, you can choose to rivet the roller into place or use a rolling pin, drive pin, binder post, and screw or bolt and nut. Regardless of how you need to install the new roller into your existing roller housing, in most cases, one of the five choices will work.

worked well. Katharine. OR. Tue Mar 04 2025

This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. It is a "K" tab patio door roller assembly with a 1-1/4 in. concave or grooved nylon ball bearing roller. The "K" tab style back end is a T shaped tab that is simply slid up into a similar T shaped receptacle in the bottom of the patio door. No screws are required. The housing is 5/8 in. wide and 1-3/16 in. tall with a flare and 3/4 in. dimple width. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and long-lasting operation. The wheels are designed to glide on a single raised aluminum or steel track. This item includes only one roller assembly per package, but a total of 2 roller assemblies are required for each sliding door. These roller assemblies are used to repair patio sliding doors with missing, damaged or malfunctioning roller assemblies. Installation easy to install with a few simple tools. Refer to dimensional line drawing to match product specifications. This style roller is used on International and similar styled patio doors.

This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The housing is 3/4 in. wide with a 7/8 in. flare and 1-1/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end. It is used by a variety of manufacturers of patio doors.

I ordered three and only got two. Anonymous. Wed May 20 2026

Our barn if finally complete...no more bricks to hold the doors in place.. Anonymous. West Jordan, UT. Fri May 01 2026

This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and long-lasting operation. The wheels are designed to glide on a single raised aluminum or steel track. This item includes only one roller assembly per package, but a total of 2 roller assemblies are required for each sliding door. These roller assemblies are used to repair patio sliding doors with missing, damaged or malfunctioning roller assemblies. Installation easy to install with a few simple tools. Refer to dimensional line drawing to match product specifications. This style roller is used on Northrup aluminum glass doors and similar styled patio doors.

This roller is constructed from steel. It comes affixed to an adjustable steel housing with an 1-1/4 in. diameter roller. Used by a variety of glass door manufacturers.

Our Sliding barn door/gate guides are rustproof and durable, suitable for all kinds of interior & exterior doors, superior glide for single/double barn doors, and can be used in bedrooms, wardrobes, bathrooms, living room, kitchens, pantry, restaurants, garages, etc.

Good quality that fits in my barn door. Evangeline. Victorville, CA. Fri Apr 17 2026

This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and long-lasting operation. The wheels are designed to glide on a single raised aluminum or steel track. This item includes only one roller assembly per package, but a total of 2 roller assemblies are required for each sliding door. These roller assemblies are used to repair patio sliding doors with missing, damaged or malfunctioning roller assemblies. Installation easy to install with a few simple tools. This style roller is used on Revco-West and similar styled patio doors. Refer to dimensional line drawing to match product specifications.

This is an F-tab patio door roller assembly with a 1 inch concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is then captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 11/16 inch wide and 1-3/16 inch tall with a 7/8 inch dimple width. Used by Lupton and a variety of other sliding patio door manufacturers.

This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It is 9/16 in. wide with a 13/16 in. flare, 1 in. tall and 2-1/8 in. long. It is rear adjusting with a 10-32 threaded mounting hole on the back end. It is used by Acorn Doors and a variety of other manufacturers of patio doors.

43

The MAGIC 2 is a wall-mount sliding system for wood doors weighing up to 176 lbs 80 kg each. This unique concealed hardware and running track create the illusion that the door is floating. This hardware can be cut and fitted for a wide variety of door widths and thicknesses. It is a high-quality smooth running system. Completely concealed hardware and upper running track Sliding system for wood door aluminum door panels and frames Interior / Residential and Hotels Doors Right and left doors applicable Smooth sliding system The slide system is built into the door, making it completely invisible whether the door is a closed or open position The mounting plate is designed to be wall-mounted.

Great system that arrived with speed!. Mr.. Sat Apr 19 2025

This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It has a plain back housing that is 19/32 in. wide with a 23/32 in. flare and 1-3/16 in. tall. It is rear adjusting with a 3/16 in. diameter mounting hole on the back end. It is used by a variety of sliding patio door manufacturers.

This is a F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab it is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 9/16 in. wide with a flare width of 11/16 in., 1-1/8 in. tall and 1-1/4 in. long (not including the inner roller housing). It has a rear adjusting screw. Used by a variety of patio door manufacturers.

This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and long-lasting operation. The wheels are designed to glide on a single raised aluminum or steel track. This item includes only one roller assembly per package, but a total of 2 roller assemblies are required for each sliding door. These roller assemblies are used to repair patio sliding doors with missing, damaged or malfunctioning roller assemblies. Installation easy to install with a few simple tools. Refer to dimensional line drawing to match product specifications. This style roller is used on Adore/Highlight and similar styled patio doors.

This is a K-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. The T-shaped tab (K-Tab) is simply slid up into a T-shaped receptacle in the bottom of the patio door. No screws are required. The housing is 5/8 in. wide and 1-3/16 in. tall with a flare and a 3/4 in. dimple width. Used by International and a variety of other sliding patio door manufacturers.

Let Your Sliding Doors Glide with Ease:This heavy-duty roller chain sliding door kit features durable steel and rubber wheels, supporting up to 600 lbs. The serrated design improves grip and stability, ensuring smooth operation. The kit is compatible with various frames and tracks, with easy installation.

Brushed Nickel

Have a creative barn door hardware project, but want flexibility at the close or open due to the dimensions of your barn door or opening? This Track Slide Door Stop is easy to install and is guaranteed to stop where you need it to be. Beautifully designed, this appealing stop will enhance any sliding door hardware project. Two Slide Stops are required, one at each end of the track.

Works perfectly for double barn doors.. Morgan. Smithfield, VA. Thu Feb 19 2026

The length of this product is 4-13/16 ". If you find it too long, please consider other products.Easy to install: Mount to the wall with screws, and no groove is required for the door. Adjusting the rollers in the track to fit your door panel. No need to drill holes in the floor.

Works very well. Easy to modify with some washers and spacers and longer bolts from Lowe’s if you don’t happen to mount your door low enough.. Sarah. Alexandria, VA. Wed May 27 2026

This is an unique back diecast patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller used on Crossly doors. It's unique diecast housing is 11/16 in. stepping down to 9/16 in. wide, 1-1/8 in. tall and 2-5/16 in. long with a flare width of 3/4 in.. The 9/16 in. wide rear design of the housing fits into the door rail held in place by a screw that engages the mounting hole in the back end. The adjustment screw is just above the mounting hole.

This is a C-tab patio door roller assembly with a 1-1/2 inch concave nylon ball bearing roller. As the C-tab is positioned around the corner screw, it is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 9/16 in. wide and 1-3/8 in. tall with a 3/4 in. dimple width. Used on Window Master patio doors. It replaces the original K-tab style that is no longer available.

Upgrade your sliding doors with this back mount tandem roller assembly, designed for Andersen wood patio doors and compatible with many other wood door brands. Two 1-1/4 inch concave steel ball bearing rollers ensure smooth, quiet operation, while the stamped steel housing with side adjustment makes precise alignment simple. Top insert points and side locking tabs secure the assembly for long-lasting performance. Perfect for DIY homeowners or contractors, this durable roller assembly restores effortless sliding and improves door longevity. Installation is easy with a standard Phillips head screwdriver.

Anonymous. US. Fri Apr 11 2025

This is a C-tab patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. As the C-tab is positioned around the corner screw, it is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 9/16 in. wide and 1-3/8 in. tall with a 3/4 in. dimple width. Used on Window Master patio doors. It replaces the original K-tab style that is no longer available.

Replace or repair broken or missing sliding door rollers with this Prime-Line D 1998 Steel Sliding Door Roller Assembly. The stamped steel patio door rollers replacement is adjustable. This door roller assembly is used by a variety of metal framed sliding patio door manufacturers. Made of stamped steel housing with a yellow finish, these sliding door rollers are strong, durable, and built to last. The housing of the sliding door rollers replacement is 11/16 inches wide by 1-11/16 inches deep and 2-3/4 inches long. The concave ball bearing steel roller is 1-1/2 inch. A Phillips head screwdriver is required for installation. Use the screw in the front of the housing to adjust ride height. For further roller assembly sliding door dimensional information, please see the line drawing.

44 in.

We specialized in sliding doors and hardware for many years. Our barn door hardware is made of high quality carbon steel with nickel-plated surface with a silver surface and each hanger wheel is tested 10,000 times. We have a professional engineering team, any questions you can contact us anytime.

Came with everything that was needed…. Solid parts. Will install when I get the doors.. Ryan. Calgary, AB. Sun Apr 12 2026

90 in.

We specialized in sliding doors and hardware for many years. Our barn door hardware is made of high-quality carbon steel with a black surface and each hanger wheel is tested 10,000 times. We have a professional engineering team, any questions you can contact us anytime.

Very good quality and fit. The 2 pieces fit together nicely so the door rolls smoothly. Very nice finish on the metal as well. Overall, a quality piece.. Janice. Port Perry, ON. Wed Apr 08 2026

This is a unique back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has the unique housing that is 15/16 in. wide and 1-5/16 in. tall. It is rear adjusting with a 10-24 threaded mounting hole and mounting tabs or ears on the front end of the assembly. As the mounting screw engages the assembly, the ears or tabs latch onto an extruded area in the door's bottom rail. It is used by Northrop.

This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball-bearing roller. It has a plain back housing that is 3/4 in. wide with a 7/8 in. flare, and 1-5/8 in. height. It is rear adjusting with a threaded mounting hole on the back end. Used by a variety of manufacturers of sliding patio doors.

This is a combination of a 1-1/8 in. diameter steel concave or grooved ball bearing roller that is 5/16 in. thick with a 1/4 in. axle hole, and a combination of 5 different axle choices. Depending on the situation, you can choose to rivet the roller into place or use a roll pin, drive pin, binder post and screw or bolt and nut. Regardless of how you need to install the new roller into your existing roller housing, in most cases, one of the five choices will work.

OPTIMAL DIMENSIONS: The roller assembly measures 1-15/16" Width with a 1-1/4" steel wheel, height of 1-7/16", and depth of 19/32".

This is a 1-1/4 in. plastic ball bearing roller with adjustable steel housing assembly. It has a 3/4 in. overall thickness flare to flare. Used by Smith and Carry and a variety of other glass door manufacturers.

This is a diecast metal plain back patio door roller assembly with a 1-1/2 inch concave nylon ball bearing roller. The dimensions are 13/16 inch wide, 1-3/16 inch tall and 1-1/2 inch long. There is a 1/4-20 threaded mounting hole in the back end and a 10-32 threaded hole on top of the housing. Reuse your existing mounting screw or order a new screw as no mounting screw is included (mounting screw is sold separately). Typically used on a large variety of sliding patio door manufacturers.

This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The stamped steel housing is 3/4 in. wide, with a 7/8 in. flare, and is 1-9/16 in. tall. Features a rear adjusting threaded mounting hole on the back end. Used by Harcar and a variety of other sliding patio door manufacturers.

72 in., Satin Nickel

Add a beautiful touch to your home with this traditional barn door track system. The classic style fits well into any space and gives a fresh, new feel. With sturdy materials and smooth operation, this track system demonstrates both quality performance and durable construction. By being able to divide your living space in creative ways, Barn Doors enable a more efficient use of space. Favorable applications include closet or pantry door, door or window covering, decorative wall accent, or room divider.

We wanted minimal hardware showing on our barn doors and this is definitely the right set. The price is great compared to some of the others available.. J L. Santa Rosa Beach, FL. Sat Apr 02 2022

This is an S-tab patio door roller assembly with a 1-1/2 in. concave Plastic ball bearing roller. As the corner screw passes through the S-tab it is then captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 23/32 in. wide and 1-3/16 in. tall with a 3/4 in. dimple width. Used by a variety of patio door manufacturers.

This is two piece roller assembly used on Ador Hilite patio doors. The outer housing is 5/8 in. wide, 31/32 in. tall with a 11/32 in. flare width and has two hook tabs on top. The inner housing holds a 1-1/2 in. steel ball bearing roller. Together, they create an adjustable roller assembly that hooks into the bottom door rail and then is held in place by a 1/4-20 machine screw placed into the back end.

This extra heavy-duty 1-1/2 inch diecast zinc tandem roller assembly is designed for Kawneer sliding patio doors and other heavy-duty sliding door applications. Featuring two concave (grooved) inline stainless steel ball bearing rollers in a diecast outer housing, it provides smooth, quiet operation and long-lasting durability. Rear adjustment allows precise alignment, while the housing includes two 1/4-20 mounting holes on the back and two on top for secure installation. Built to withstand severe weather conditions, this assembly is perfect for DIY homeowners or contractors seeking reliable performance. A Phillips head screwdriver is required for installation.

Replace damaged or missing patio door rollers with this 1 inch plain back tandem roller assembly. Designed for a variety of sliding glass door manufacturers, it features two concave steel ball bearing wheels in a durable stamped steel housing. Each wheel has a 5/16 inch width with a steel inner race and ball bearings for smooth, quiet operation. The housing measures 1-1/32 inch tall, 11/16 inch wide, and 3-1/8 inch long, with a 1/4-20 threaded mounting hole on the back and an optional hole on top. Adjustable height allows precise alignment, though a mounting screw (1/4-20 inch) may need to be purchased separately. Ideal for DIY homeowners or contractors, this assembly restores effortless sliding door operation.

Door rollers are essential components used in various types of doors, including sliding, folding, and pocket doors. These small but mighty devices play a crucial role in enabling smooth and effortless door operation. Typically made from durable materials such as steel or nylon, door rollers are designed to fit into a track system, allowing the door to glide open or closed with minimal effort.

This sliding glass door roller assembly is constructed from steel and features height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and long-lasting operation. The wheels are designed to glide on a single raised aluminum or steel track. This item includes only one roller assembly per package, but a total of 2 roller assemblies are required for each sliding door. These roller assemblies are used to repair patio sliding doors with missing, damaged, or malfunctioning roller assemblies. Installation is easy to install with a few simple tools. Refer to dimensional line drawing to match product specifications.

Black

Elevate your bathroom with a shower door designed to combine versatility, durability, and sleek modernity. Engineered with an adjustable cut-to-fit track, this single sliding door seamlessly adapts to shower openings ranging from 56" to 60", offering a tailored installation experience for diverse bathroom layouts. Its frameless design not only enhances visual appeal with a minimalist aesthetic but also optimizes space efficiency—ideal for compact environments. Crafted from 6mm ANSI-certified tempered glass with an integrated shatter-resistant film, it ensures superior safety and long-lasting resilience. The rust-resistant stainless steel and aluminum alloy hardware withstands high humidity, while smooth-glide rollers guarantee quiet, effortless operation. With precision rubber seals that prevent leaks and a low-maintenance glass surface that repels water spots and soap residue, this door keeps your bathroom pristine while reducing daily upkeep. Discover a perfect blend of form and function designed for enduring performance and elegance.

This is a beautiful frameless shower door. We made the right choice. If I decide to upgrade the shower door in guest bathroom, I will purchase this one again.. A Wayfair Fan. Fort Lauderdale, FL. Mon May 11 2026

This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and long-lasting operation. The wheels are designed to glide on a single raised aluminum or steel track. This item includes only one roller assembly per package, but a total of 2 roller assemblies are required for each sliding door. These roller assemblies are used to repair patio sliding doors with missing, damaged or malfunctioning roller assemblies. Installation easy to install with a few simple tools. This style roller is used on Door Master and similar styled patio doors. Refer to dimensional line drawing to match product specifications.

This is a unique one of a kind trolley style roller assembly with two parallel 1-1/4 in. concave steel rollers in a stamped steel housing. Used on Guaranteed Products patio doors, it's unique housing fits into the bottom rail held in place by the two existing screws in the door. Purchase the Prime-Line part D 1548 for the steel roller version.

Had a sliding door that was hard to open.... These rollers worked perfectly! The sliding door now works like a charm. Perfect!!. Beverly B. Orange County, CA. Sun Feb 23 2025

This is an diecast plain back patio door roller assembly with a 1-1/4 inch concave stainless steel ball bearing roller, and used by Trimview and a variety of other patio door manufacturers. It is diecast plain back housing is 11/16 inch wide, 1 inch tall and 2-5/8 inch long. The adjustment screw is in the back end. There is a 1/4-20 threaded mounting hole in the back end.

90 in.

We believe that everyone deserves a better life, and hope that our products can create a more comfortable living environment for our customers. So, our aim is to serve everyone by offering a range of interactive friendly household items. Our barn door hardware quality has been tested by the market and can provide a long-term product experience for all families.

So far it’s working beautifully!. Ashley. Fort Myers, FL. Thu Mar 12 2026

Replace or repair broken or missing sliding door rollers with the Prime-Line D 1791 1-1/8 inch unique back tandem roller assembly. Designed for Milgard and a variety of other vinyl patio doors, it features concave steel ball bearing rollers in a durable stamped steel housing with a golden finish. The housing measures 3/4 inch wide and 1 inch tall for secure installation. Ideal for DIY homeowners and contractors, this assembly restores smooth, quiet sliding operation. Installation requires only a Phillips head screwdriver.

This is a sliding window roller assembly with a flat edge wheel. This flat edge sliding window roller is constructed from nylon. It comes affixed to nylon housing. This style roller fits on guaranteed products and similar styled sliding windows.

This is an diecast plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. Its plain back diecast is 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a 10-32 threaded hole on top of the housing. Used by Fleetwood, Fullview and a variety of other patio door manufacturers.

This is a white plastic housing with a concave steel roller. It features a two different height adjustment. Used by Alenco window.