14 In Nickel Plated Shelf Support 8 Pack Primeline U 10169

Decadence defined! Get the look of high-end dog furniture for less with the Double Donut Dog Bed by Bowsers. Piping on the outer bolster creates an elegant sofa look, while the overstuffed ''tufted'' cushion, and removable, convoluted foam bottom insert, combine to provide your pet with unsurpassed comfort and support. With all there is to choose from, you're sure to find one that your dog loves, as well as one that goes great with your existing decor!

These Prime-Line U 10169 Steel Shelf Support Pegs make sure your shelves stay in place, with a 20 pound maximum safe load per peg. Constructed of steel, the shelving pegs come with a nickel plated finish and are strong and durable. These shelving support pegs are easy to install and used in many shelf support applications. Each shelving peg has a 1/4 inch diameter with 5/32 inch screw mounting hole. For further dimensional information, please see the line drawing.

Nice to have extras in case the others fall out and get lost. Toni. Oldsmar, FL. Wed May 06 2026

These wall brackets are constructed of stamped stainless steel and they come in a satin finish. This repair kit includes a total of two (2) U-brackets, and two (2), two-ear wall brackets, together with all the fasteners necessary for their complete installation. All brackets in this kit are designed for use with 1-in. thick restroom partition (phenolic) panels. The two-ear brackets have a 2-1/2 in. overall reach, with a 3-1/4 in. wide base. The U-brackets feature a 2-hole mounting base, an overall reach of 1-1/2 in., and 3/4 in. wide bases. Besides being used for new installs, brackets like these are commonly used to repair and replace broken, or missing wall brackets. Wall brackets like these are manufactured with various dimensions for use with different panel thicknesses, as well as in alternate finishes. These restroom partition wall brackets are used by many, and they are simple to install. The T-27 Torx security fasteners included with this item feature tamper-resistant 6 lobe security drives with center pins.

Includes a total of two (2) two-ear wall brackets, and four (4) alcove brackets, together with all the fasteners necessary for their complete installation. All brackets in this kit are designed for use with 1-inch thick restroom partition panels. Besides being used for new installs, brackets like these are commonly used to repair and replace broken or missing wall brackets. These wall brackets are manufactured with various dimensions for use with different panel thicknesses, as well as in alternate finishes. The T-27 Torx security fasteners included with this item feature tamper-resistant 6-lobe security drives with center pins.

This two Ear bracket features a width of 4 in., designed for installations of 1-1/4 in. thick panels, These brackets are used to replace damaged, or missing installation wall brackets, and for new installations of restroom partition panels. This Bracket is used by many Manufactures. Fasteners are not included with this item.

These shelf support pegs are constructed from heavy-duty steel and come plated in a bright nickel finish. They are designed to fit into 5 mm. (3/16 in.) diameter holes, making them perfect for most metrically sized imported cabinets and bookshelves. Each peg has a 25 lb. maximum safe load. Can be used for many heavier-duty applications such as in furniture with glass shelves. Shelf support pegs are easy to install and are used by a variety of manufacturers.

Does what I needed it to. Jessica. Sat Aug 24 2024

This wall bracket is constructed of diecast Zamak and comes in a chrome plated finish. It features a double ear mounting base and a 3-1/2 in. overall reach, with a 4 in. wide base and it fits 1 in. thick panels. This item is used to replace broken or missing two-ear urinal brackets, and it includes all the fasteners necessary for complete installation. This item is not available in any other finish. These chrome plated, two-ear urinal brackets are also available for panel thicknesses of 1/2 in., 3/4 in., 7/8 in. and 1 in. (with 2-1/2 in. wide base), and 1-1/4 in.. Urinal brackets like these are used by many, and are simple to install.

Shawn. Innisfil, ON. Thu Aug 25 2022

These Shelf Support Pegs by Prime-Line Products are constructed from heavy-duty steel and come in a nickel-plated finish. These types of shelf support pegs are commonly used in bookcases, stereo, and storage cabinets to support adjustable glass and wood shelving at up to 25 lbs. per support peg. These shelf support pegs feature a 1/4 in. peg diameter and they are easy to install. Use pliers to remove any stubborn/stuck pegs. Avoid using levels where the hole's diameter has been widened.

I love to buy with you, always the best prices and great quality. Laura. Mountain View, CA. Sun May 10 2026

This wall bracket is constructed of diecast Zamak and comes in a chrome plated finish. It features a double ear mounting base and a 2-1/2 in. overall reach, with a 4 in. wide base and it fits 1-1/4 in. thick panels. This item is used to replace broken or missing two-ear wall brackets, and it includes all the fasteners necessary for complete installation. This item is only available in a stainless steel finish for 3/4 in. and 1 in. thick panels. These chrome plated, two-ear wall brackets are also available for panel thicknesses of 1/2 in., 3/4 in., 7/8 in. and 1 in.. Restroom partition wall brackets like these are used by many, and are simple to install.

These wall brackets are constructed of zinc alloy (cast Zamak) and they come in a chrome plated finish. They feature dual ears for greater stability, and they are designed for use with 1 in. thick panels. Wall brackets like these are manufactured in various dimensions for use with different panel thicknesses, as well as in alternate finishes. These restroom partition wall brackets are used by many, and they are simple to install. This item includes all the fasteners necessary for its complete installation.

This wall bracket is constructed of zinc alloy (Zamak) and comes in a chrome plated finish. It features a 2-hole mounting base and a 1-1/4 in. overall reach, with a 1 in. wide base, and it fits 3/4 in. thick panels. This restroom partition hardware is used to replace broken or missing U-brackets, and it includes all the fasteners necessary for its complete installation. Wall brackets like these are manufactured in various dimensions for use with different panel thicknesses, as well as in alternate finishes. These restroom partition wall brackets are used by many, and they are simple to install.

Feature dual ears for greater stability, and they are designed for use with 1-inch thick panels. Wall brackets like these are manufactured in various dimensions for use with different panel thicknesses, as well as in alternate finishes. These restroom partition wall brackets are used by many, and they are simple to install. This item includes all the fasteners necessary for its complete installation. The T-27 Torx security fasteners included with this item feature tamper-resistant 6-lobe security drives with center pins.

These wall brackets are constructed of zinc alloy (cast Zamak) and they come in a chrome plated finish. They feature dual ears for greater stability, and they are designed for use with 1-1/4 in. thick panels. Wall brackets like these are manufactured in various dimensions for use with different panel thicknesses, as well as in alternate finishes. These restroom partition wall brackets are used by many, and they are simple to install. This item includes all the fasteners necessary for its complete installation. The T-27 Torx security fasteners included with this item feature tamper-resistant 6-lobe security drives with center pins.

This headrail bracket is constructed of zinc alloy (Zamak) and comes in a chrome plated finish. These brackets are designed for use with 1-1/4 in. thick headrails and they include the fasteners necessary for complete installation.

These end caps are for use in protecting sharp, unfinished edges of white wire shelving. They are constructed of vinyl and come white in color. Used to cap off rough cut metal wire shelving. EP 1132 caps off 1/4 inch wire and EP 11324 caps off 3/16 inch wire.

These L-shaped mini wall brackets are constructed of zinc alloy (cast Zamak) and they come in a chrome plated finish. They feature 1-3/8 in. ears with 1-3/4 in. arms, and they are adjustable to accommodate all panel thicknesses. These wall brackets are manufactured in alternate material and finishes to match existing hardware. L-shaped brackets like these are versatile, used by many, and they are simple to install. This two-piece set of wall brackets includes all the fasteners necessary for its complete installation.

These shelf support pegs by Prime-Line Products are constructed from heavy-duty steel and come in a brass-plated finish. These types of shelf support pegs are commonly used in bookcases, stereo and storage cabinets to support adjustable glass and wood shelving at up to 25 pounds per support peg. These shelf support pegs feature a 1/4 inch peg diameter and they are easy to install. Use pliers to remove any stubborn/stuck pegs. Avoid using levels where hole's diameter has been widened.

These shelf pegs are made of durable plastic and come in a brown color, with a 5 mm outside diameter and a 1/4-inch depth, designed to support shelving with a maximum weight capacity of 5 pounds per peg. The pegs feature a serrated design for secure installation and have a 1/2-inch reach, making them easy to install and reliable for holding shelves. Sold in a convenient 12-pack, these pegs are an ideal choice for shelving systems.

This is a shelf support peg with a 1/4 in. diameter. Comes in a steel plated construction with a vinyl tip. A variety of furniture manufacturers use these to support glass shelves. Each peg has a 20 lb. maximum safe load.

Anonymous. Wed Feb 11 2026

The threads on sheet metal screws are designed to pull two materials tightly together. When attaching metal to wood, it is especially important to pre-drill a hole. These stainless steel screws are rust and corrosion resistant.

Designed to support the SuiteSymphony 48" W Top Shelf, the SuiteSymphony Top Shelf Support Kit attaches the top shelf to the closet wall and closet organizer. This kit includes the left, right, and center support brackets. SuiteSymphony—affordable storage that fits your life.

Perfect form and easy to set up!. Brendan. Sun Mar 22 2026

These shelf support pegs from Prime-Line are constructed from heavy-duty steel and come plated in a brass plated finish. They are designed to fit into 7mm (9/32 in.) diameter holes, making them perfect for most metrically sized imported cabinets and bookshelves. These pegs feature a 25-pound (per peg) maximum safe load capacity and can be used for many heavier-duty applications such as in furniture with glass shelves. These shelf support pegs are easy to install and are used by many manufacturers.

These wall brackets are constructed of stainless steel and they come in a satin finish. This repair kit includes a total of two (2) U-brackets, and two (2) one-ear wall brackets, together with all the fasteners necessary for their complete installation. All brackets in this kit are designed for use with 1 in. thick restroom partition panels. The single ear brackets can be mounted to the left or right side of the panels, and they have a 2-1/2 in. overall reach, with a 2-1/2 in. wide base. The U-brackets feature a 2-hole mounting base, an overall reach of 1-1/2 in., and 1-1/4 in. overall U-bracket width. Besides being used for new installs, brackets like these are commonly used to repair and replace broken, or missing wall brackets. Wall brackets like these are manufactured with various dimensions for use with different panel thicknesses, as well as in alternate finishes. These restroom partition wall brackets are used by many, and they are simple to install. The T-27 Torx security fasteners included with this item feature tamper-resistant 6-lobe security drives with center pins.

This closet rod support and shelf bracket is constructed of steel, and it comes in a durable white powder-coated finish. This bracket accommodates 1-3/8 in. diameter closet rods.

They probably should send 2 pieces per order when the description says « 2 pieces » Not happy I have to run after the items I paid for. Should have been done right for the get go.. Sophie. Montreal, QC. Sat Mar 15 2025

These anchor clips are constructed of zinc alloy (cast Zamak) and they come in a chrome plated finish. Together they feature a 1/4 in. offset and two (2) pre-punched installation mounting holes. This item includes one pair of clips; an inside and outside leaf, and they are used for fastening partition panels to restroom partition pilasters.

These are chrome plated, steel sheet metal screws. For use on various part assemblies as well as general-purpose applications.

This square edge cover plate is constructed of stamped stainless steel and comes in a satin finish. Fasteners for the installation of this bracket are included in each pack. This cover plate is used for the repair and replacement of restroom partition hardware in commercial restroom stalls.

Mount shelves or handrail securely to your store wall with Econoco's 96” zinc heavyweight surface mount single slotted standard for president line products. Thicker standard designed to support heavy loads. Slotted standards provide the safest and most secure way to install your displays.

Very study slotted standard with countersunk screw holes. Shipping was fast. Great delivery. Parker. Blaine, MN. Mon Nov 07 2022

With Speedy Shelf strips there's no need to replace shelf pins, count shelf pin holes or remove items when moving shelves up. As a shelf is lifted, built-in spring-action holders retract and then snap back into place

This is a wonderful product and a really great concept on how to install it.. Anonymous. Mon Jul 06 2026

This track hardware provides additional support to various wall units, so you can put together the (walk-in) closet of your dreams. Clean-lined and rectangular, it's the ideal way to hang out a closet system thanks to multiple circular openings on one of the sides. Easy to install and also interchangeable, this rail is made from steel with a crisp white finish to create an understated look. Take note: Screws, toggle bolts, and other hardware are sold separately from this piece.

It was a bit long but it worked great.. Dorothy. US. Mon Jan 12 2026

These wall brackets and alcove clips are constructed of zinc alloy and they come in a chrome-plated finish. This repair kit includes a total of two one-ear wall brackets, and four alcove brackets, together with all the fasteners necessary for their complete installation. All brackets in this kit are designed for use with 1-inch thick restroom partition panels. Besides being used for new installs, brackets like these are commonly used to repair and replace broken or missing wall brackets. These wall brackets are manufactured with various dimensions for use with different panel thicknesses, as well as in alternate finishes. The T-27 Torx security fasteners included with this item feature tamper-resistant 6-lobe security drives with center pins.

This cover plate is constructed of stamped stainless steel and comes in a satin finish. Fasteners for the installation of this cover are included in each pack. This item is used for the repair and replacement of restroom partition hardware in commercial restroom stalls.

This is a right angle curved molding alcove clips used for Metpar Toilet compartments, constructed of chrome plated Zamak, For 1 in. door and 1-1/4 in. Post size.

These wall brackets are constructed of stainless steel and they come in a satin finish. They feature a single ear that can be mounted to the left or right side of the panel, and they have a 2-1/2 in. overall reach, with a 2-5/8 in. wide base. These one ear panel brackets are designed for use with 1 in. thick panels, and they are commonly used to replace broken, or missing wall brackets. Wall brackets like these are manufactured in various dimensions for use with different panel thicknesses, as well as in alternate finishes. These restroom partition wall brackets are used by many, and they are simple to install. This item includes all the fasteners necessary for its complete installation. The T-27 Torx security fasteners included with this item feature tamper-resistant 6-lobe security drives with center pins.

Transform your walls while adding functional storage with the Sleek Iron shelf bracket. Combining clean curves and smooth lines, it gracefully draws the eye to whatever you're showcasing - adding an understated appeal to any space. This cast iron bracket complements a wide variety of styles, including farmhouse, rustic, modern, minimalist, Scandinavian, traditional, mid-century modern, and more. Since each size of the Sleek bracket is available in some of the most popular hardware finishes, they are a great way to elevate your storage - literally! Introduce open shelving for arranging books and collectibles around the home, storing cocktail supplies and wine bottles above a home bar area, holding dishes and cookware in the kitchen, keeping blankets and diapers above a nursery changing table, and so much more. The universally appealing design of these brackets makes them perfect for use in a variety of commercial and office spaces too. The Sleek brackets are best mounted into wall studs or support beams, and once installed, the matching flathead screws sit flush in the counter-sunk screw holes.

Gorgeous and high-quality bracket, perfect finishing touch for our wet bar remodel!. Melissa. Savannah, GA. Tue Feb 03 2026

Prime-Line MP1583 Sliding Door Repair Track is designed to restore smooth operation to worn or damaged sliding track systems on aluminum doors. This replacement door track cap slips over existing damaged tracks, providing a simple and effective solution to prolong the life of your sliding door. Built to last, the patio track is made of high-quality stainless steel for maximum durability and rust resistance, ensuring long-term performance. Simply prep the existing door tracks, apply a thin bead of silicone glue, and snap the repair track into place using a rubber mallet and block of wood for a secure fit. Each replacement sliding track measures 3/16 inch x 72 inch x 1/4 inch and comes in a convenient 2-pack. For further dimensional information, please see the line drawing before purchasing.

Anonymous. Mon Nov 03 2025

Don’t underutilize your storage space just because it has a slanted or angled ceiling. Our bracket is a one-of-a-kind solution to transform your sloped ceilings into functional storage. Our easily installed bracket gives you the ability to attach hanging clothing.

This bracket is amazing! We have an angled root on the second floor. This bracket is a perfect fit for extra hanging space on our second floor bedrooms.. Laura. US. Sun Mar 15 2026

Restore smooth, dependable drawer operation with this Universal Wooden Drawer Track Repair Kit, designed to replace damaged, missing, or worn center-mount drawer hardware. Ideal for common household applications such as kitchen cabinets, bathroom vanities, dressers, and storage furniture, this kit includes everything needed to repair one wooden drawer track system without replacing the drawer or cabinet. The system features a 22‑5/8 inch galvanized steel monorail, which can be cut down to fit smaller openings and typically accommodates drawers around 21‑3/4 inches deep. Steel roller brackets with smooth-gliding molded plastic wheels replace worn guide buttons, allowing the drawer to open and close easily while maintaining proper alignment. A galvanized steel back plate and center guide help stabilize the drawer and reduce friction, preventing damage to cabinet face frames and drawer openings over time. Designed with the DIY homeowner in mind, the roller assemblies install directly into the inside lower left and right corners of the cabinet opening, and all required mounting hardware is included. With a maximum load rating of 20 pounds, this universal tri-roller system offers a practical, cost-effective solution for restoring everyday drawers that stick, wobble, or no longer track correctly. Be sure to review the included line art drawing and compare measurements before purchasing to ensure proper fit.

These U-shaped wall brackets are constructed of 18 GA., continuous roll-formed stainless steel material, and come with a 5-hole installation pattern. They feature an inside width of 1 in., designed for installations of 1 in. thick panels, and they come with a peel-away plastic liner to protect their finished surfaces during shipping and installation. Roll-formed wall brackets like these are used by many and are simple to install. U brackets like these are used to replace damaged, or missing installation wall brackets, and for new installations of restroom partition panels. This item includes one 54 in. long, U-shaped bracket per package only. Easy to install.

These anchor clips are constructed of cast stainless steel and they come in a satin finish. Together they feature a 1/4 inch offset and 4 pre-punched installation mounting holes. This item includes one pair of clips; an inside and outside leaf, and they are used for fastening partition panels to restroom partition pilasters.

Made of 0.3-inch thick tempered glass for extra safety and durability; shatters into small, blunt pieces to prevent injury.

Beautiful piece fits perfectly in the new remodel bathroom!. Chieko. Fallbrook, CA. Mon Mar 09 2026

These shower door bottom guides are constructed of plastic and come clear in color. The channels feature . wide openings that will allow for use with up to 3/16 in. thick frameless glass panels. Use of these glue-in bottom-mount guides will help keep hanging glass panels aligned in their respective tracks. They are easy to install and are used by a variety of tub and shower door manufacturers.

Great replacement. Anonymous. Tue Sep 23 2025

These U-shaped wall brackets are constructed of 18 GA., continuous roll-formed stainless steel material, and come with a 5-hole installation pattern. They feature an inside width of 1/2 in., designed for installations of 1/2 in. thick panels, and they come with a peel-away plastic liner to protect their finished surfaces during shipping and installation. Roll-formed wall brackets like these are used by many and are simple to install. U brackets like these are used to replace damaged, or missing installation wall brackets, and for new installations of restroom partition panels. This item includes one 57 in. long, U-shaped bracket per package only. Easy to install.

Enhance your closet's functionality and aesthetics with the 48" Aluminum Oval Closet Rod Kit. This comprehensive solution features a 1-3/16" x 19/32" aluminum rod, offering a balance of strength and lightweight design. The sleek finish provides a contemporary look, while the included screw mount supports ensure secure mounting. With four #8 x 3/4” flathead screws included, installation is straightforward, making it an excellent choice for both DIY enthusiasts and professionals.

Awesome oval closet rod. Very modern and make closet look amazing. Also purchased the gold but on back order. Will definitely be buying more.. Dave. Mon Mar 02 2026

These T-20 Torx screws are used together with T-20 barrel nuts where tamper-proof installation hardware is preferred.

V159 Metal Shelf Supports with 1/4" Shank 8pk - Oil Rubbed.

These did the job!. Brittany. Fall River, MA. Sat Nov 02 2024

Style Meets Strength: Our Cast Iron Shelf Brackets:Sturdy triangular shelf bracket, made of thick cast iron for high load-bearing capacity and durability. Stylish design complements any décor, enhancing space cleanliness and aesthetics. Ideal for living rooms, studies, kitchens, bathrooms, and offices.

Have t used them yet but can tell they are quality. Very strong low profile look too.. Connor. Tue May 12 2026