12 In Steel Sliding Window Roller Assembly Superlite 2 Pack Primeline G 3089

Zinc Plated, 5.44" H x 3.82" W x 1.13" D

This is a combination of a 1-1/4 in. diameter nylon concave ball bearing roller that is 5/16 in. thick with a 1/4 in. axle hole and a combination of five different axle choices. Depending on the situation, you can choose to rivet the roller into place or use a rolling pin, drive pin, binder post, and screw or bolt and nut. Regardless of how you need to install the new roller into your existing roller housing, in most cases, one of the five choices will work.

worked well. Katharine. OR. Tue Mar 04 2025

This is a black plastic housing sliding window roller assembly. It features a flat-edged plastic wheel with a 3/4 in. outside diameter, with stainless steel ball bearings.

This flat-edged sliding window roller is constructed from steel. It comes affixed to nylon housing. This style roller is used on acorn series 2100 thru series 2300, new style windows.

This is a combination of a 1-1/8 in. diameter steel concave or grooved ball bearing roller that is 5/16 in. thick with a 1/4 in. axle hole, and a combination of 5 different axle choices. Depending on the situation, you can choose to rivet the roller into place or use a roll pin, drive pin, binder post and screw or bolt and nut. Regardless of how you need to install the new roller into your existing roller housing, in most cases, one of the five choices will work.

This is a sliding window roller assembly made of extruded aluminum bracket with a flat edge steel ball bearing roller. These brackets are used on international imperial series 1200 windows and a variety of other window manufacturers.

These roller assemblies are constructed of stamped steel housings and steel wheels. The housing features flared corners for better gripping power when inserted into the bottom rails of the sliding sash. The wheels feature concave (grooved) edges and are designed to glide over raised tracks. Roller assemblies like these are commonly used in showcase windows and display cabinets that are equipped with sliding glass or wood panels.

Product provided an exact replacement for my 70 year old windows. Should last longer than the nylon rollers included with the windows. Jeff. Pittsburgh Pa Metro. Mon Sep 08 2025

This is a white plastic housing with a concave steel roller. It features a two different height adjustment. Used by Alenco window.

This sliding window roller assembly is constructed from nylon. It is attached to nylon housing and has flat edge tandem rollers. This style roller is used by a variety of window manufacturers.

This is a sliding window in a black plastic housing with a flat-edged stainless steel ball-bearing roller. Features a stainless steel roller insert carrier.

Replace or repair broken or missing sliding door rollers with this Prime-Line D 1998 Steel Sliding Door Roller Assembly. The stamped steel patio door rollers replacement is adjustable. This door roller assembly is used by a variety of metal framed sliding patio door manufacturers. Made of stamped steel housing with a yellow finish, these sliding door rollers are strong, durable, and built to last. The housing of the sliding door rollers replacement is 11/16 inches wide by 1-11/16 inches deep and 2-3/4 inches long. The concave ball bearing steel roller is 1-1/2 inch. A Phillips head screwdriver is required for installation. Use the screw in the front of the housing to adjust ride height. For further roller assembly sliding door dimensional information, please see the line drawing.

This is a unique back, patio door roller assembly with a 1-1/4 inch concave, or grooved, steel ball bearing roller. The housing is 13/16 inch wide and 1-1/8 inch tall. It is rear adjusting with a 1/4-20 threaded mounting hole and mounting tabs, or ears, on the front end of the assembly. As the mounting screw engages the assembly, the ears or tabs latch onto an extruded area in the door's bottom rail. Usually used by Noranda Building Products, Noranda, Three Rivers Aluminum, Bee Cee, and a variety of other manufacturers.

This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. It is a "K" tab patio door roller assembly with a 1-1/4 in. concave or grooved nylon ball bearing roller. The "K" tab style back end is a T shaped tab that is simply slid up into a similar T shaped receptacle in the bottom of the patio door. No screws are required. The housing is 5/8 in. wide and 1-3/16 in. tall with a flare and 3/4 in. dimple width. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and long-lasting operation. The wheels are designed to glide on a single raised aluminum or steel track. This item includes only one roller assembly per package, but a total of 2 roller assemblies are required for each sliding door. These roller assemblies are used to repair patio sliding doors with missing, damaged or malfunctioning roller assemblies. Installation easy to install with a few simple tools. Refer to dimensional line drawing to match product specifications. This style roller is used on International and similar styled patio doors.

Prime-Line D 1579-C Sliding Door Repair Track is designed to restore smooth operation to worn or damaged sliding track systems on aluminum doors. This replacement door track cap slips over existing damaged tracks, providing a simple and effective solution to prolong the life of your sliding door. Built to last, the patio track is made of high-quality stainless steel for maximum durability and rust resistance, ensuring long-term performance. Simply prep the existing door tracks, apply a thin bead of silicone glue, and snap the repair track into place using a rubber mallet and block of wood for a secure fit. Each replacement sliding track measures 3/16 inch x 48 inch x 1/4 inch and comes in a convenient 2-pack. For further dimensional information, please see the line drawing before purchasing.

Fit perfectly!. Gordon. Sat Apr 11 2026

This is a window roller, flat edge, sliding, suitable for use with Adore Hilite sliding windows. This flat nylon constructed roller is used on adore highlight sliding windows. Nylon axle pins also act as a side guide. Installs two per window.

This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and long-lasting operation. The wheels are designed to glide on a single raised aluminum or steel track. This item includes only one roller assembly per package, but a total of 2 roller assemblies are required for each sliding door. These roller assemblies are used to repair patio sliding doors with missing, damaged or malfunctioning roller assemblies. Installation easy to install with a few simple tools. This style roller is used on Door Master and similar styled patio doors. Refer to dimensional line drawing to match product specifications.

This is an F-tab patio door roller assembly with a 1 inch concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is then captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 11/16 inch wide and 1-3/16 inch tall with a 7/8 inch dimple width. Used by Lupton and a variety of other sliding patio door manufacturers.

Satin Nickel, 72" H x 3" W x 0.5" D

This bottom track is constructed from roll-formed steel and comes finished in champagne gold. The track can be used for new installs, or to replace missing or damaged bottom tracks of by-passing mirror doors that use convex edge mirror door roller assemblies. They feature a double-grooved track as used by a variety of mirror door manufacturers, and can easily be cut for custom installs. These replacement tracks are sold individually and the installation fasteners are not included.

It was the correct size and fit beautifully. Wheel’s on the closet door slide beautifully on the track Price was great and I love Wayfair Thank you. Carol. Wed May 14 2025

White

Convert your hinged door into a self-closing door with Prime-Line safety spring door closer. This surface mounted door closer installs in minutes! Use this spring door closer on doors that weigh up to 150 pounds These closers are not handed, so they can be used on both left and right-handed hinged-swinging doors. The door closers feature an adjustable closing force and speed. Constructed of diecast materials with a white painted finish, this safety spring door closer can complement any style door. Each closer is U.L. listed with a 1/2 hour fire rating. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point of where it makes contact with the bullet-shaped housing of the closer. All fasteners and installation instructions are included with this item. For lubrication, avoid using WD-40 which actually breaks down lubricating grease. Instead, apply white lithium grease to internal compressing springs if desired or necessary. Other colors/finishes include: Black, brown, chrome plated and satin chrome plated. For a rust and weather resistant closure, consider model numbers KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. Do not overtighten, turning past 4 hole positions will cause this item to fail.

greagt. Stan. Bentonville, AR. Wed Jul 16 2025

This nylon-constructed guide bracket houses a 5/16 in. Flat-edged brass roller. The nylon housing holds this roller into the bottom of your rail. Used on Elco/Century windows. Easy to install with a few simple tools in a few minutes. Installation of this roller will make the slide action of your window improve. A Phillip's head screwdriver is required for installation.

This is a white plastic housing with concave tandem steel rollers. Used by a.b.c. Windows. A dual wheel upgrade to the prime-line part g-3038 improves glide and window performance.

This ADA compliant slide latch is constructed of stamped stainless steel and comes in a satin finish. It is a surface-mounted latch that is designed for use on 1 in. thick swing-in partition doors, and it comes complete with an "occupied" indicator and a matching stainless steel keeper. The exterior indicator has a dial-type internal mechanism that announces a locked door (or an occupied stall) with red color when the lock is engaged. When the slide lock is in the unlocked position, the dial indicator reveals a green color, or unoccupied state, announcing its availability for use. For access to the locked stall, the exterior indicator also comes equipped with a stainless steel pull and a slotted barrel nut which can disengage the lock from the exterior in the event of an emergency. This latch mounts over a durable, black plastic base with its mounting holes spaced apart at 1-3/8 inches, and it features a 1-3/16 in. bolt throw. This lock includes a stainless steel set screw and steel Allen wrench required for installation. Toilet partition slide latches like these are used by many and they are easy to install.

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

It does the job. It is kind of heavy, but it is effective.. Tiffany. Cocoa, FL. Wed May 28 2025

This patio sliding screen door grille is constructed of aluminum and comes in a white painted finish. The grille is designed to install on the exterior side of 48 in. Wide sliding screen doors to provide child safety, and protect the screen fabric from pet damage. This screen door grille measures 26 in. Tall, and with the fasteners and installation instructions provided it is simple to install. This maintenance-free grille is constructed of superior quality using close weave aluminum mesh supported by strong, extruded aluminum frame material in an attractive styling.

High quality screen door grill. Had to trim mounting tabs on one side to allow the screen to fit into the frame recess.. Edward. Meadow Vista, CA. Sun Jun 22 2025

This is a C-tab patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. As the C-tab is positioned around the corner screw, it is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 9/16 in. wide and 1-3/8 in. tall with a 3/4 in. dimple width. Used on Window Master patio doors. It replaces the original K-tab style that is no longer available.

This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 23/32 in. wide with a 3/4 in. dimple width and 1-3/16 in. tall. It is rear adjusting with a threaded mounting hole on the back end. It is used by Bee Cee, Harcar and a variety of other manufacturers of patio doors.

Upgrade your sliding doors with this back mount tandem roller assembly, designed for Andersen wood patio doors and compatible with many other wood door brands. Two 1-1/4 inch concave steel ball bearing rollers ensure smooth, quiet operation, while the stamped steel housing with side adjustment makes precise alignment simple. Top insert points and side locking tabs secure the assembly for long-lasting performance. Perfect for DIY homeowners or contractors, this durable roller assembly restores effortless sliding and improves door longevity. Installation is easy with a standard Phillips head screwdriver.

Anonymous. US. Fri Apr 11 2025

Black

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.

This is a plain back patio door roller assembly with a 1-11/16 in. concave or grooved nylon ball bearing roller used by Arcadia and a variety of other patio door manufacturers. The stamped steel housing has a unique design that is 3/4 in. wide, 1-5/16 in. tall and 2-11/16 in. long with an adjustment screw located on the back end. See Prime-Line part D 1731 for the tall version.

This is a white plastic housing window assembly. It features flat edge tandem brass rollers with 3/8 in. outside diameter and built-in side guides.

This is a plain back patio door roller assembly with a 1-1/8 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 5/8 in. wide, 1 in. tall and 2-1/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end. It is used by Capitol and a variety of other manufacturers of patio doors.

This Prime-Line H 3787 Spiral Tilt Balance Tension Tool is used for winding spiral balances on spiral tilt window. The tilt balance tool features a mortise hook and slot design. The offset handle makes for easy turning. Wind clockwise to tighten. Constructed of chrome plated steel, this tilt window tension tool is strong, durable, and built to last. This tilt window spiral balance tool is 10 inches in length and features a single hook design. For further steel spiral tool dimensional information, please see the line drawing.

1/2 in

This is a shower door bottom seal that is constructed of clear vinyl and comes in 36 in. lengths. Designed to attach to the bottom of frameless, swinging shower doors without the need of adhesives. Cutting down to size will be necessary if your shower door measures less than 36 in. in width. No tools are required to install this shower door bottom. For an alternate design, please review the Prime-Line.

what I needed, Solved my problem, I need receipts for the items that I purchased where can I go on line to print them out Thank You. Daniel. Martinez, CA. Sat Feb 21 2026

Complete your at-home laundry care system!

Appearance wise it is small, but it can fit 2 large coats. Tina. Fri Jan 16 2026

This operator cover is constructed from diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the truth entrygard operator.

Restore smooth, effortless operation to your sliding patio door with this Tandem Stainless Steel Roller Assembly. Designed with a unique bottom-mount housing, this roller assembly is commonly used on Andersen sliding patio doors and many other wood patio door brands. It is an ideal choice for homeowners and DIY installers seeking a durable replacement solution. The assembly includes two 1-1/2 inch concave stainless steel ball bearing rollers housed in a corrosion-resistant stainless steel frame. This construction provides strength, durability, and long-lasting performance, especially in coastal or high-humidity environments where rust and corrosion are common issues. The stainless steel housing measures 11/16 inch wide, 1-3/16 inches tall, and 4-5/8 inches long, with a mounting tab at each end for secure installation. It is designed to fit into a mortised pocket in the bottom rail of the door. For added convenience, the roller assembly features a side adjustment mechanism, allowing you to fine-tune the door height and alignment with a standard screwdriver. Whether you are repairing an Andersen sliding door or replacing worn rollers on another wood patio door, this stainless steel roller assembly provides a reliable and long-lasting solution to keep your door gliding smoothly. Please refer to the line art drawing for exact dimensions to ensure compatibility before purchasing, as this is not a universal part.

This is a stainless steel, plain back, patio door roller assembly with a 1-1/2 in. concave stainless steel ball bearing roller. It has a stainless steel plain back housing that is 3/4 in. wide, 1-1/4 in. tall and 2-5/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end and an optional use #10-32 threaded hole on the top. It is used by Daryl, Patio Magic and a variety of other manufacturers of sliding patio doors.

This is a white plastic roller assembly. The roller is made of brass flat edge and is most often used by Elco, Better- Bilt Aluminum, and a variety of other manufacturers.

This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. The housing that is 5/8 in. wide and 1 in. tall with two mounting tabs/hooks on the top. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end that holds it in place once the tabs/hooks are snapped into place in the door's bottom rail. It has a 3/4 in. flare It is used by Smith Carry and variety of other manufacturers of patio doors.

33"W x 72"H

This sliding patio door roller assembly is constructed from steel. It features a 1 In. ball bearing wheel with an adjustable steel housing. This type of roller assembly is quick and easy to install.

Gray, 30.13" H x 3.75" W x 1" D

This Prime-Line Adjustable Sliding Door Lock features a telescopic design that allows it to adjust to fit nearly all standard patio door openings. The lock bar is adjustable to accommodate openings from 28 inch to 48 inch Secure your door in an open position, so you can safely allow fresh air into your home. When not in use, simply swing the metal security bar up and out of the way. Unlike typical patio door patio door lock bar, this door lock stick does not require you to cut the unit down to size with a saw. You simply press in the tension release clip to extend the length or reduce the length. Constructed of aluminum with an aluminum finish, the patio safety bar prevents doors from being forced open. Please refer to the line art drawing for dimensions and compare to your needs before purchasing.

Perfect for securing my sliding glass door. Glad I found it.. Carolyn. Louisville, KY. Fri Feb 20 2026

This is a F-tab patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 3/4 in. wide and 1-1/2 in. tall with a rear adjusting screw. Used by Holleyview, Fullview and a variety of other patio door manufacturers.

These roller assemblies are constructed of a stamped steel housing and feature a plastic, center grooved (concave) edge wheel. These types of roller assemblies are typically used on wood sliding windows and panels, and require a mortised installation. These roller assemblies fit Glide Master, and they are used by a variety of other manufacturers.

This operator cover is constructed from diecast Zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

This is a F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 5/8 in. wide with a 3/4 in. flare, 1-3/16 in. tall with a rear adjusting screw. Used by Rylock and a variety of other patio door manufacturers.

Bronze

Add an extra layer of security to your home with this Defender Security Door Reinforcement Lock. Designed to withstand 800 lbs. of force, you can rest easy knowing your family is safe and protected! This reinforcement lock has a spring-loaded design, aluminum construction and a bronze anodized finish. This reinforcement lock can be quickly and easily installed on any swing-in door of any thickness, and can help ensure the door cannot be opened from the outside by being kicked inch Additionally, it’s tamper-resistant, so it can protect against lock picking and bumping. Plus, it’s child-safe, because you can install it higher on a door, where your young ones can’t reach. Length is 2 to 0.19 inch. Width is 1 to 0.38 inch. Installation takes minutes, and this door reinforcement lock comes with 3 inch hardened screws. Extra home security and peace of mind are well within reach, and doesn’t have to come with the high price tag of an alarm system! Be sure to view the manufacturer’s How-To Installation Video also linked to this page, in the upper left-hand corner.

Havent used it yet but it seems very heavy duty.i think it will do just fine on the project I need it for. Good buy. Carla. Sun Jun 30 2024

This is a F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 3/4 in. wide and 1-3/16 in. tall with a dimple width of 7/8 in.. Used by Northrup series 600 doors and a variety of other patio door manufacturers.

This is a 1-1/4 in. plastic ball bearing roller with adjustable steel housing assembly. It has a 3/4 in. overall thickness flare to flare. Used by Smith and Carry and a variety of other glass door manufacturers.