Showing results for "1/4 in. drive 6 point socket set with rails 5/32 in. 9/16 in. 22 piece tekton shd90210"

Spend less time installing and more time admiring your new amerock cabinet hardware with the amerock door and drawer hardware installation template. The amerock hardware installation template pack includes everything you need for precise and easy install of knobs and pulls in just three easy steps.

• Drill bit included

This saved many hours of mistakes and heartache!! We chose to go with all pulls and no knobs and this template was a godsend ...it was actually recommended when we purchased the pulls here on Wayfair and I thought it couldnt hurt.. that is such an understatement !! The only measuring I had to do was the center point on the drawers ..I cant believe how fast the installation of the hardware went ...we had zero mistakes ..we had zero holes to redrill ...we had no moments when we looked around and realized that we mis-measured!! The price of this is far too low in my opinion... the amount of time and labor this saved us is worth so much more.. as usual Wayfair came through with the perfect product for the perfect price at the exact time I needed it.. all of that with free shipping.. you cant beat it!! If you are installing knobs or pulls you need this template!! Easiest part of the entire renovation!. jocelyn. VALATIE, NY. 2020-06-01 17:55:20

Cabinet drawer precision alignment kit with 3/16" drill bit, to easily mount knobs and pulls to your cabinets with precision. Door guide features a cluster of knob hole placements and center to center hole template for the following: 3" (both low and high placement), 3-1/2", 96mm (3-3/4"), & 4". Drawer guide features center to center hole template for the following: 64mm (2-1/2"), 3", 3-1/2", 96mm (3-3/4"), 4", 4-1/2", & 128mm (5-1/16").

• Overall: 1.25'' H x 6.625'' W x 9'' D
• Overall Product Weight: 0.07lb.

So this guide is a sanity and life saver. My daughter was helping me to install the cabinet pulls and this made everything easier. Would highly recommend. jayne. High Ridge, Mo. 2022-07-10 15:57:37

10 sets of furniture connection accessories, each set includes a fitting cam lock nut, a positioning pin connecting rod bolt, and a pre-inserted nut. Holes and combination installation are based on the external dimensions of each component.

• The cam lock nut is made of zinc alloy, the Dowel is steel with color zinc plating, and the Pre-inserted Nut is made of plastic.
• Weighing 0.19 pounds.
• Cam lock nut can rotate 90 degrees +/- 5 degrees when locking. Avoid excessive force during locking to prevent damage to the eccentric wheel assembly

The innovative and functional Hickory Hardware Mounting Templates – your go-to solution for seamless and precise installations. Crafted with meticulous attention to detail, these templates are designed to elevate your home improvement projects to new heights. The clear blue hue adds a touch of modern sophistication, ensuring. Constructed from durable plastic, the Hickory Hardware Mounting Templates offer a perfect balance of resilience and functionality. The templates are thoughtfully engineered to streamline your installation process, providing a user-friendly experience Whether you're upgrading your kitchen cabinets, installing new drawer pulls, or revamping your entire space, these mounting templates are an indispensable tool in your arsenal. Say goodbye to the frustration of misaligned hardware and hello to the precision that Hickory Hardware brings to your projects. Elevate your home décor effortlessly with the Hickory Hardware Mounting Templates – where functionality meets style in a clear blue template that sets the standard for precision and excellence in every installation.

• Overall: 0.625'' H x 5.375'' W x 8'' D
• Overall Product Weight: 0.07lb.

. Martha. Redmond, WA. 2023-04-25 19:40:04

This kit is constructed of steel and plastic components and it includes all the parts necessary to repair one wooden drawer track system. The track is constructed of a 22-5/8 in. galvanized steel monorail that can be cut down to size, the roller assemblies are constructed of steel brackets with plastic wheels, and the guide and backplate are constructed of galvanized steel. The roller assemblies are used to replace worn or missing guide buttons, allowing the drawers to glide easily when opening and closing, while at the same time preventing wear on the cabinet’s face frame or drawer opening. These roller assemblies install into the inside lower left and right corners of the drawer face opening with necessary fasteners provided within each kit. This track system has a max load rating of 20 lbs., and it is used by many to replace missing or malfunctioning drawer track hardware.

• The universal tri roller system includes 2 rollers, a backplate, a center track, and a roller
• Constructed of both galvanized steel and mold injected plastic components
• Requires a 1-1/4 in. top or bottom clearance for proper operation

This kit is constructed of steel and plastic components and it includes all the parts necessary to repair one wooden drawer track system. The track is constructed of a 22-5/8 in. galvanized steel monorail that can be cut down to size, the roller assemblies are constructed of steel brackets with plastic wheels, and the guide and backplate are constructed of galvanized steel. The roller assemblies are used to replace worn or missing guide buttons, allowing the drawers to glide easily when opening and closing, while at the same time preventing wear on the cabinet’s face frame or drawer opening. These roller assemblies install into the inside lower left and right corners of the drawer face opening with necessary fasteners provided within each kit.

• Used to replace damaged or missing drawer tracks and guides
• Constructed of both galvanized steel and mold injected plastic components
• Has a maximum safe load of 20 lbs. for the tri roller system
• For further dimensional information, please see the line drawing

【M10 Hex Socket Screws】Hex Socket; Head Style: Socket Cap Head; Material: Titanium Steel; Color: Black. Use M8 Hex Allen Wrench (not included) 【Package Content: 25 Screws】25PK Hex Socket Cap Screws; Thread Size: M10. Length: 20MM 【Size】Screw Diameter: 0.4"/10mm, Screw Length: 0.8"/20mm, Head Diameter: 0.6"/16mm, Head Length: 0.4"/10mm 【Weight】1PK Weight: 21.4g/0.05 lbs; 25 PK Weight: 538g/1.2 lbs; Suitable Fastener Type: Used with M8 Hex Key 【Nuts】Use M10 nus. 15709-Nut 【Product Video】Video Instructions link: https://youtu.be/7hKe1Zu0aR8. You can also search "15709-screw-25pk m10 socket screw m8 allen hex wrench fixturedipsplays" on youtube to locate the video. You can also download video by following this link: https://www.fixturedisplays.com/video/15709.AVI

The track is constructed of a 22-1/2 in. piece of rolled-edge galvanized steel that can be cut down to size, the roller assemblies are constructed of steel brackets with plastic wheels, and the guides are constructed of white and purple plastic. The roller assemblies are used to replace worn or missing guide buttons, allowing the drawers to glide easily when opening and closing, while at the same time preventing wear on the cabinet’s face frame or drawer opening. These roller assemblies install into the inside lower left and right corners of the drawer face opening with necessary fasteners provided within each kit.

• For further dimensional information, please see the line drawing

• Overall Size : #8 x 3/4"; 82 degree countersink.
• Material: These wood screws are made of steel with a flat black finish applied.
• The package contains 25 flat head screws.
• These countersink screws need to be torqued with a Phillips-Head screwdriver. A pilot hole is required when screwing into hardwood.

If you are looking for a high quality assembly screw and a competitive price we offer the best variety screws to help you complete any household project or remodeling job. We offer screws that are used in general construction, attaching hinges and drawer slides to furniture and cabinets as well as general cabinet construction assembly. We carry a complete range of wood screws in the industry to complete your job or production.

• High quality assembly screws
• Undercut screws have a flat bottom under the head, as opposed to a conical head that tapers down to the shank
• Undercut screws are often used for fastening cabinet or furniture hinges and some speciality drawer slides
• #2 Phillips drive
• Coarse thread for greater holding power and faster driving

If you are looking for a high-quality assembly screw and a competitive price we offer the best variety screws to help you complete any household project or remodeling job. We offer screws that are used in general construction, attaching hinges and drawer slides to furniture and cabinets as well as general cabinet construction assembly. We carry a complete range of wood screws in the industry to complete your job or production.

• High-quality assembly screws for general woodworking use
• Interior use applications
• #2 Drive flat head with 4 nibs for self-countersinking
• Coarse thread for greater holding power and faster driving
• Type 17 auger point for quicker penetration

If you are looking for a high-quality assembly screw and a competitive price we offer the best variety screws to help you complete any household project or remodeling job. We offer screws that are used in general construction, attaching hinges and drawer slides to furniture and cabinets as well as general cabinet construction assembly. We carry a complete range of wood screws in the industry to complete your job or production.

• High-quality assembly screws used for woodworking and hinge applications
• Coarse thread for greater holding power and faster driving
• Flat-head #6 Philips drive
• Great for general repair around the house
• Interior use applications