Showing results for "split level drafting table"

National Public Seating strong and sturdy Science Tables are a necessity for your science lab. Built from solid ash wood with an attractive polyurethane clear finish, our Wood Frame Science Lab Tables are perfect for science and chemistry classrooms. The table legs are assembled with a 13-gauge, heavy-duty steel brace attached with a metal-on-metal double bolt connection secured with nylon threaded lock nuts for superior holding strength. NPS® Science Tables are offered with book compartments or a solid front apron. Each leg is outfitted with rubber liquid-protecting leg boots and adjustable glides for accurate floor leveling, offering a wobble-free experience. The Whiteboard is made from 1.25 Industrial Grade Particleboard with a High-Pressure Laminate top and 3mm Edge banding

• Overall Height - Top to Bottom: 30''

An accessible instructor's desk. This unit has a roll-under sink with a paddle handle faucet and gas fixture. The knee space is wide enough for a wheelchair to fit into space. The meets ADA requirements. This unit also has a duplex outlet, file drawer, three smaller drawers, and a pull-out writing board.

• Overall: 34'' H x 30'' L x 72'' W

Built to last and made for the toughest environments, the gauge steel frame apron and gauge legs make this table virtually indestructible. The gauge steel tabletop support tabs and corner brackets fuse as one with heavy-duty tamper-free hex screws. The adjustable-height steel legs feature a supreme dual connection. The leg base is fastened to the tabletop with heavy-duty screws, which get inserted into the frame using a strongly welded hanger bolt. Legs connect to the frame corner brackets with industrial-grade nylon-insert lock nuts. The legs adjust in increments and are locked firmly in place with external tooth lock washers and heavy-duty tamper-free hex screws.

• Overall Height - Top to Bottom: 37.25''

. Michael. Patchogue, NY. 2022-09-24 15:44:48

The instructor's desk is constructed of solid oak, oak and hardwood veneers, this unit serves as a complete demonstration center offering a spacious work surface. The dovetailed drawers operated smoothly on epoxy coated steel glides with nylon bearings. The top is black phenolic resin. The unit includes one mixing faucet, double gas cock, GFI protected AC duplex receptacle, polypropylene trap, set of support rods and crossbar, and locks for the cupboard and all five drawers. Note, the mirror, mirror/markerboard will not fit on this unit.

• Overall: 36'' H x 96'' L x 30'' W

Self-contained demo center is constructed of quality solid hardwood, and oak veneers with a chemical resistant, earth-friendly UV finish. Features one file drawer with full extension glides, 3 smaller drawers (all dove-tailed) and two cupboard spaces with locks and wire pulls. The drawers run on epoxy-coated steel glides with nylon rollers. This demonstration center rolls easily on 4" locking swivel casters. Included are 15" x 13"x 5" look sink, hand water pump, two 2-1/2 gallon water bottles and connecting hose, two rod sockets, two each 3/4" diameter x 36"L upright anodized aluminum rods, and 1 each 1/2" diameter anodized aluminum crossbar with connecting clamps. Included to help organize storage is a handy removable storage tote tray and a pegboard with hooks. Comes with an oak framed combination mirror/marker board. Electrical service is supplied by means of a 25' extension cord which can be  connected to a GFI protected AC duplex receptacle installed in the side of the cabinet. The top is black 1-1/4" ChemGuard laminate. Unit can also be ordered with a flat top. Mobile capacity: 500 lbs. Overall  dimensions: 30"D x 54"W x 36"H. Shipping weight 310 lbs.

• Overall size: 54"W x 30"D X 36"H. Constructed of solid oak and oak veneers, finished with an earth-friendly chemical resistant UV finish.
• Worksurface is 1-1/4"thick Chemguard laminate, which offers moderate chemical resistance
• Unit includes a stainless steel sink with hand pump, two water bottles and connecting hoses, and locking doors and drawers.
• Unit rolls easily on 4" ball bearing locking swivel casters
• Fastrak model (Manufacturer's Quick-Ship program) , max quantity 6.

The product have perfect chemistry with any science classroom. These paragons of endurance are built with solid ash framework, side panels and legs beneath 1” thick chemical resistant tabletop. The work surface is of solid black, firmly secured, high-pressure laminate, resistant to water and 13 commonly-used laboratory chemicals. Robust legs are spot-welded to the frame with metal-on-metal double-bolts on 13-gauge steel corner braces for maximal strength and durability. Feet are outfitted with rubber liquid-protective boots and Heavy Duty 3" Locking Casters and Stretchers . Includes two storage compartments concealable with the included side-panel aprons. The SLT meets MAS Certified Green environmental industrial standards.

• Solid Ash Legs And Apron
• Rubber Liquid Protecting Boots
• Legs Attach With Metal On Metal Double Bolt Through Assembly On 13-Gauge Steel Corner Braces
• Black, 3/4" Thick Phenolic Top Is Highly Impervious To Most Chemicals, Acids, Corrosions, Stains And Moisture
• This Model Features Heavy Duty 3" Locking Casters and Stretchers

The instructor's desk is constructed of solid oak, oak and hardwood veneers, this unit serves as a complete demonstration center offering a spacious work surface. The dovetailed drawers operated smoothly on epoxy coated steel glides with nylon bearings. The top is 1" black epoxy resin. The unit includes one mixing faucet and one double gas cock, GFI protected AC duplex receptacle, polypropylene trap, and locks for cupboard and all five drawers. Note, the mirror, mirror/markerboard will not fit in this unit.

• Overall: 36'' H x 96'' L x 30'' W

National Public Seating strong and sturdy science tables with book compartments are a necessity for your science lab. Built from solid ash wood with an attractive polyurethane clear finish, our High Pressure Laminate science lab tables are perfect for many science and chemistry classrooms. HPL tabletops provide an exceptional work surface and are made with a high-pressure laminate surface that has been tested according to NEMA standard testing to resist scratches, boiling water, high temperatures, and many forms of stains including a number of acids. Also exceeds 1800 wear cycles and over 125 inches ball impact resistance. HPL tabletops come equipped with our top of the line ribbed-tongue T-molding. The table legs are assembled with a 13 gauge, heavy-duty steel brace attached with a metal-on-metal double bolt connection for superior durability and to provide a no-wobble experience. NPS science tables offer a choice of book compartments or solid front aprons, with an industry top-of-the-line ash wood frame and legs outfitted with rubber liquid-protecting leg boots and adjustable glides for accurate floor leveling.

• Overall Height - Top to Bottom: 30''

This science table has perfect chemistry with any science classroom. These paragons of endurance are built with a solid ash framework, side panels, and legs beneath a 1” thick chemical-resistant tabletop. The work surface is of solid black, firmly secured, high-pressure laminate, resistant to water, and 13 commonly-used laboratory chemicals. Robust legs are spot-welded to the frame with metal-on-metal double-bolts on 13-gauge steel corner braces for maximal strength and durability. Feet are outfitted with rubber liquid-protective boots and casters, stretchers, and braces. The SLT meets MAS Certified Green environmental industrial standards.

Everything sciences teachers want. Designed with teacher input and desire for a safe, secure classroom. Teachers maintain control of the class with all students facing the instructor. The large work surface is made of chemical-resistant phenolic resin. The cabinets provide locked storage space. Side-mounted hooks hold book bags off the floor.

• Overall: 36'' H x 88'' L x 46'' W
• Overall Product Weight: 532lb.

Legs and aprons are constructed of solid red oak and are smoothly machined with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and heavy-duty 13 gauge steel corner braces. Square red oak legs, with hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and rubber leg boots. Tops are not included.

• Weight capacity: 500 lbs
• Hanger bolts: 0.31

This table is ideal for a classroom or art studio. The full tilting fiberesin top includes heavy duty adjusters and pencil stops to ensure that tilting the top is never a hassle. A dust cover is also included with this table to keep art projects safe when your away. The solid maple legs are constructed using dowel construction to ensure durability. If you're looking for a practical and durable art table, this is the perfect solution.

• Overall: 37.5'' H x 37.5'' W