Closet System Pull Out

A double-sided closet bar made from solid anodised metal. These pull bars feature our signature, diamond-cut, cross-knurl pattern and are refined by hand. Comes complete with small solid metal discs. They work great on interior glass or solid doors with a minimum of 10mm thickness and a maximum of 60mm thickness. Not intended for use in wet environments. Included in the box is two closet bars with double-sided fixings.

This by-pass closet door track kit is constructed of a galvanized track, with other steel and plastic components. It features double-J tracks for the installation of a 2-door panel system. The track length is pre-cut to 71 in. to minimize the need for cutting, and it is commonly used with wooden door panels measuring from 3/4 in. thick to 1-1/4 in. thick. Each kit includes an adjustable bottom guide (constructed of a steel base with adjustable plastic tips), brass-plated stamped-steel finger pulls and installation instructions. This kit will safely hold doors that weigh up to 75-pounds each.

This by-pass closet door track kit is constructed of a galvanized track, with other steel and plastic components. It features double-J tracks for the installation of a 2-door panel system. The track length is pre-cut to 59-in. to minimize the need for cutting, and it is commonly used with wooden door panels measuring from 3/4 inch thick to 1-1/4 inch thick. Each kit includes an adjustable bottom guide (constructed of a steel base with adjustable plastic tips), brass-plated stamped-steel finger pulls and installation instructions. This kit will safely hold doors that weigh up to 60-pounds each.

This by-pass closet door track is constructed of galvanized steel. It features the same double J-track as those used in Prime-Line’s 2-door kits, and it can also be used with 3-door by-pass systems. The track length is pre-cut to 95 inches to minimize the need for cutting, and it is commonly used with wooden door panels measuring from 3/4 inch thick to 1-3/8 inch thick. This track will safely hold doors that weigh up to 60 lbs. each, and it can be used to mount one panel on each track or one panel on one track and two panels on the second.

The Prime-Line 163590 by-pass closet track kit is designed for easy installation and smooth operation of closet doors, providing a reliable and efficient solution for your storage needs. This closet door track kit includes roller assemblies that are adjustable, ensuring a perfect fit for doors of various thicknesses, offering seamless sliding functionality every time. Crafted from galvanized steel, this closet track kit is built to withstand daily use, ensuring long-lasting durability and maintaining smooth door operation over time. The Prime-Line adjustable track kit comes with all necessary components and clear instructions, making the installation of your closet door kit straightforward and hassle-free. The track kit features a pre-cut 59-inch track and adjustable guides to fit your specific door size. For further dimensional information, please see the line drawing provided.

Replace or repair a broken closet door with this Prime-Line N 7743  Closet Pulls. This closet door pull comes complete with fasteners for a quick and easy installation. Constructed from solid brass with a classic bronze  finish, these sliding door pulls are strong, durable, and built to last. This closet door handle pull measures 3-1/4 inches in height and 1-3/8 inches in width with a 3/8 inch depth. For further closet sliding door handle dimensional information, please see the line drawing.

Looks great and very high quality. Slowly replacing all of the shiny brass from the ‘90s and changing out the little hardware bits goes a long way to updating our new old house.. Elizabeth. Arnold, MD. Sat Apr 08 2023

This mortise cup closet door pull is constructed of solid brass and comes finished in satin nickel. The outside diameter of this pull is 2-1/8 inch and it has a depth of 5/16 inch. These mortise cups set flush in the door and are used on by-passing closet panel doors to provide a pull for ease of opening and closing, and it they are used by many manufacturers. This item includes 2 pulls and 4 nails per package. Installation tip: to avoid damaging the pulls during installation; use a pair of needle nose pliers to hold the nails while hammering, then finish driving the nails with a nail set to seat them in place. Silicone glue may be required if the hole has worn larger.

Changed all door handles and pulls. Easily installed.. Frankie. Richmond, CA. Tue May 17 2022

This by-pass closet door track kit is constructed of a galvanized track, with other steel and plastic components. It features double-J tracks for the installation of a 2-door panel system. The track length is pre-cut to 47 in. to minimize the need for cutting, and it is commonly used with wooden door panels measuring from 3/4 in. thick to 1-1/4 in. thick. Each kit includes an adjustable bottom guide (constructed of a steel base with adjustable plastic tips), brass-plated stamped-steel finger pulls and installation instructions. This kit will safely hold doors that weigh up to 75-pounds each.

This mortise cup closet door pull is constructed of solid brass and comes finished in brass. The outside diameter of this pull is 2 inch and it has a depth of 5/16 inch. These mortise cups set flush in the door and are used on by-passing closet panel doors to provide a pull for ease of opening and closing, and it they are used by many manufacturers. This item includes 2 pulls and 4 nails per package. Installation tip: to avoid damaging the pulls during installation; use a pair of needle nose pliers to hold the nails while hammering, then finish driving the nails with a nail set to seat them in place. Silicone glue may be required if the hole has worn larger.

These pulls work for what I needed. I used these to fill the backsides of closet doors that came predrilled for knobs. I didn't need knobs on the inside so I used these to cover the holes. The metal is very thin, which is what I expected so I can't say that I am disappointed. These work very well for my application. They come with tiny nails you are expected to use to keep the pulls from falling out. We had a hard time trying to hammer these little nails in without hitting the pulls and causing dents. Lucky for us, we had a tube of clear adhesive caulk that we used to stick them in place. Not sure how the caulk would hold up long term if you were actually using the pulls to open and close a door, but it's not an issue for my use. This is the only reason for 4 stars.. Lisa. Fredericksburg, TX. Thu Mar 05 2020

This by-pass closet door track kit is constructed of a galvanized track, with other steel and plastic components. It features double-J tracks for the installation of a 2-door panel system. The track length is pre-cut to 47 inch to minimize the need for cutting, and it is commonly used with wooden door panels measuring from 3/4 inch thick to 1-3/8 inch thick. Each kit includes an adjustable bottom guide (constructed of a steel base with adjustable plastic tips), brass-plated stamped-steel finger pulls and installation instructions. This kit will safely hold doors that weigh up to 75-pounds each.