Showing results for "steel 40 in. parallel clamp set of 2 bora 571140t"

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. single cylinder deadlock in a white painted finish.

• Includes one spring-loaded Prime-Line part N 6611 top roller guide with a 3/4 in. plastic wheel, and a 3/8 in. diameter nail-down style base
• Components come in a beautiful, corrosion resistant, brushed chrome plated finish
• Designed with a time-tested, jimmy-proof mechanism that helps prohibit forced entry by separation of door from jamb
• Designed for use with aluminum screens on sliding windows
• Easy to install with only a few simple tools

This bi-fold closet track kit is constructed of steel, and the track comes in a white-painted finish. This kit includes one track and two track sockets, as needed for hanging two double-door bi-fold panels. This replacement hardware is designed for use with bi-fold panels that weigh no more than 30 lbs. each. The track is pre-cut down to 29-3/4 in. to minimize the need for cutting, and to simplify the installation process. Use this kit to enhance the beauty of a closet with bi-folding doors that fold open, and to obtain access to the full width of the closet opening. Note: Bi-folding door panels sold separately by other.

• Product Type: Shutter/Door Accessory
• Overall: 0.5'' H x 1'' W x 29.75'' D

Perfect replacement for the damaged head rail that came with my bifold doors.. Robert. Santa Rosa, CA. 2023-02-24 17:11:43

The Prime-Line N 7534 Bi-Fold Door Hardware Repair Kit includes components constructed of steel and plastic to help get bi-fold closet doors back on track. This kit includes: One N 6543 jamb and floor mount pivot bracket. N 6543 is a steel base with an adjustable self-lubricating plastic bushing. One N 6673 bottom pivot. The 3/8 inch diameter plastic base houses a grooved pivot tip that screws in or out for adjustment. One spring-loaded 7/8 inch diameter N 6703 top roller guide, 3/8 inch plastic base. For 1 inch 1-3/8 inch thick Kenna Frame doors. One spring-loaded 1/4 inch diameter N 6700 top pivot, 3/8 inch plastic base. Used by Alliance and many other bi-fold manufacturers. One spring-loaded N 6672 bi-fold closet door top plastic pivot with 3/8 inch diameter pivot and base. Use these Prime-Line repair parts to replace missing or damaged hardware to restore a bi-fold closet door to optimal performance. It can be used on bi-fold doors manufactured from Acme, Alliance, Kenna Frame and many more. The pivot guide included in this kit works for a 1 inch wide track that has an inner track size of 7/8 inch.

• Product Type: Shutter/Door Accessory
• Overall: 9.3'' H x 3.75'' W x 1.45'' D

• Product Type: Door Knocker
• Overall: 1'' H x 1'' W x 1'' D

These anchor clips are constructed of cast stainless steel and they come in a satin finish. Together they feature a 1/4 inch offset and 4 pre-punched installation mounting holes. This item includes one pair of clips; an inside and outside leaf, and they are used for fastening partition panels to restroom partition pilasters.

• Restroom partition replacement hardware; used to fasten panels to pilasters

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

• For use in closets where a bi-folding panel system is preferred
• Components come in a beautiful, corrosion resistant, brushed chrome plated finish
• Designed with a time-tested, jimmy-proof mechanism that helps prohibit forced entry by separation of door from jamb
• Designed for use with aluminum screens on sliding windows
• Easy to install with only a few simple tools

These are stamped aluminum clips for attaching window screens to awnings and other types of windows. Commonly used with 3/8 in. x 3/4 in. screen frame.

• Stamped aluminum
• Used for attaching window screens to awnings and other types of windows
• For further dimensional information, please see the line drawing

Prime-Line D 1579-C Sliding Door Repair Track is designed to restore smooth operation to worn or damaged sliding track systems on aluminum doors. This replacement door track cap slips over existing damaged tracks, providing a simple and effective solution to prolong the life of your sliding door. Built to last, the patio track is made of high-quality stainless steel for maximum durability and rust resistance, ensuring long-term performance. Simply prep the existing door tracks, apply a thin bead of silicone glue, and snap the repair track into place using a rubber mallet and block of wood for a secure fit. Each replacement sliding track measures 3/16 inch x 48 inch x 1/4 inch and comes in a convenient 2-pack. For further dimensional information, please see the line drawing before purchasing.

These flush black plastic clips are used to secure window screens, storm windows, and storm door panels.

• Flush design
• Used to attach screens to window opening
• Mounting hardware included

This is a casement operator track that is riveted or screwed onto the bottom of a steel casement window. It fits the older style casement operators Prime-Line parts H 3500 through H 3523, and H 3581 through H 3588. The guide disc on the tip of the operator glides through the track to open or close the window.

• Used on steel framed windows
• Non-handed for left or right operating windows
• A Phillips head screwdriver is required for installation

This by-pass closet door track is constructed of galvanized steel. It features the same double J-track as those used in Prime-Line’s 2-door kits, and it can also be used with 3-door by-pass systems. The track length is pre-cut to 95 inches to minimize the need for cutting, and it is commonly used with wooden door panels measuring from 3/4 inch thick to 1-3/8 inch thick. This track will safely hold doors that weigh up to 60 lbs. each, and it can be used to mount one panel on each track or one panel on one track and two panels on the second.

• Used to hang two and three-door, by-passing sliding closet door panels
• Accepts 3/4 inch, 7/8 inch, 1-1/8 inch or 1-3/8 inch thick doors
• Galvanized steel construction
• Constructed of one solid piece of track
• Installation fasteners are not included with this item and should be purchased separately

This Bi-Fold Door bottom pivot by Prime-Line Products is constructed of both steel and plastic components. The steel bolt comes in a corrosion-resistant, zinc-plated finish. This bi-fold door pivot features a bottom mount design with a hex head bolt for quick vertical adjustment, and it fits on 1-inch to 1-3/8 in. thick bi-fold doors, whose weight does not exceed up to 30lbs. each. Installation of these pivots requires only a 3/8 in. diameter hole beneath the vertical stile of the bi-fold door.

• Constructed of solid steel rod, spring steel wire and a steel clip
• Steel rod comes in a corrosion resistant, zinc plated finish
• Used with steel framed bi-folding closet doors by a variety of wardrobe door manufacturers
• Designed for use as a top guide
• Easy to install with a few simple tools