Showing results for "1 in. x 6 in. to 16 ft. enhance basics clam shell grooved composite deck board trex cs010616e2g01"

The superior nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. The chemically sealed ends prevent moisture infiltration. It is mounted on and bonded on a durable wolmanized wood and contains a full height air escape tunnel. The unit consists of a three (3) piece construction with beveled fronts and a through the wall installation kit that is included. Five (5") maximum compression is recommended. Application with a flush dock to building in conjunction with an Edge-O-Dock use a twenty (20) inch projection Dock Seal. To ensure proper size complete the survey sheet. This unit is non-returnable.

• Three foam-filled pads offer full dock protection
• Maximum compression design offers the maximum protection
• Built-in air tunnels allow air to escape when contacted by a trailer
• Mounting hardware and installation instructions make installation quick and easy

The superior nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. The chemically sealed ends prevent moisture infiltration. It is mounted on and bonded on a durable wolmanized wood and contains a full height air escape tunnel. The unit consists of a three (3) piece construction with beveled fronts and a through the wall installation kit that is included. Five (5") maximum compression is recommended. Application with a flush dock to building in conjunction with an Edge-O-Dock use a twenty (20) inch projection Dock Seal. To ensure proper size complete the survey sheet. This unit is non-returnable.

• Unique two-in-one design provides a dock seal & dock shelter
• Maximum compression design offers the maximum protection
• Built-in air tunnels allow air to escape when contacted by a trailer
• Mounting hardware and installation instructions make installation quick and easy

The dock leveler weather stripping keeps out pests and rodents and maintains the proper working environment. The kit includes: (2) precut side strips, (1) precut foam insulator for the rear of the pit, and installation hardware. The dual vinyl has a white dual-seal that attaches to the side of dock levelers with self-tapping sheet metal screws. The replacement vinyl slides into an extruded channel that is attached with self-tapping screws.

• Overall: 1'' H x 2'' W

The superior nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. The chemically sealed ends prevent moisture infiltration. It is mounted on and bonded on a durable wolmanized wood and contains a full height air escape tunnel. The unit consists of a three (3) piece construction with beveled fronts and a through the wall installation kit that is included. Five (5") maximum compression is recommended. Application with a flush dock to building in conjunction with an Edge-O-Dock use a twenty (20) inch projection Dock Seal. To ensure proper size complete the survey sheet. This unit is non-returnable.

• Three foam-filled pads offer full dock protection
• Maximum compression design offers the maximum protection
• Built-in air tunnels allow air to escape when contacted by a trailer
• Mounting hardware and installation instructions make installation quick and easy

• Overall: 4.25'' H x 0.31'' W x 0.31'' D
• Overall Product Weight: 4lb.

The Mechanical Dockleveler is constructed of heavy duty checkered plate deck steel for long term support of the steel channel understructure. The dock leveler allows for easy truck loading and unloading. The leveler is engineered and designed for minimum maintenance and features a smooth pull chain operation. Includes two (2) laminated bumpers.

• Pit-mounted dockleveler allows for easy trailer loading and unloading at loading docks
• Spring operated mechanical pull-chain makes use easy
• Telescopic side-mounted toeguards cover opening through the entire service range
• Complies with CS 202-56, OSHA and ANSI MH14.11

• Overall: 4.25'' H x 0.31'' W x 0.31'' D
• Overall Product Weight: 3lb.

• Overall: 4.25'' H x 0.31'' W x 0.31'' D
• Overall Product Weight: 2lb.

• Overall: 5'' H x 0.5'' W x 0.5'' D
• Overall Product Weight: 1lb.

Concrete Sleeve Anchor Bolt

• Overall: 4'' H x 0.75'' W x 0.75'' D
• Overall Product Weight: 2lb.

Optional six piece black vinyl patch material, including glue and instructions for Dock Seal and Dock Seal/Shelter combinations.

• Overall: 6'' H x 7'' W x 13'' D
• Overall Product Weight: 3lb.

The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least forty-eight (48) inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. Standard Ramping is twenty-nine (29) inches, with a thirty-six (36-5/8) inch long ramping length available for smaller grade. A steel dock edge, or approach ramp is required for proper installation. The Mechanical Edge-O-Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

• Easy install allows unit to quickly mount to any loading dock with a steel dock edge
• Tread plate design offers a positive non-slip gripping action
• Product design conveniently does not require a concrete recess
• Solid steel construction offers long lasting reliable use