Showing results for "bolt biter 3/8 in. drive sae/metric impact extraction socket 13 mm 1/2 in. gearwrench 84765"

The Riverstone 3" Center to Center Cup/Bin Pull by MNG Hardware features a natural pattern sure to add a bit of rustic beauty to any kitchen or bathroom. Cast in high-density zinc for superior durability and quality. Includes standard attachment hardware.

• Bore Hole - Center to Center: 3''
• Number of Mounting Holes: 2
• Number of Pulls: 1

. chris. Hackensack, MN. 2022-11-14 14:40:40

Aluminum Ramps-Easy to Transport and Load onto Trucks：Our 10,000 lbs capacity long aluminum loading ramp is perfect for transporting heavy vehicles to loading tools or over high steps. Its ultra-lightweight design allows for quick and easy setup. The stair-step anti-slip boards not only distribute weight evenly but also provide effective grip. Measuring 108" x 15", it is an essential tool for farms, factories, auto repair shops, and roadside assistance.

The PCRBDR23 3-piece Curb Ramp Kit enables cars, trucks, dollies, and carts to easily transition to an elevated surface. Each curb ramp features a high-traction textured exterior, great for loading docks, parking lots, driveways, and high-traffic areas where curb access is always needed. Package includes (3) pieces, 4 ft curb ramps, each measured 4 ft wide and 16 inches deep. This Car/Truck Curb Ramps - Vehicle Curb-Side Bridge Kit (3-Pcs.) - Vehicle Curb-Side Ramp Set - Rugged & Heavy Duty Design - 3-Section Pieces, Up to 12’ ft. Length - Marine Grade Waterproof-Rated Construction - Textured-Style Surface for Increased Friction / Traction - Integrated Cut-Out Holes for Permanent Mounting, Optional - Ability to Fasten & Interconnect Multiple Ramps Pieces - *Connecting Dowels / Pins, Not Included - Used for Un-Even Curbs, Driveways, Gutters, Garages, Sidewalks - Universal Vehicle Application: for Car, Truck, Trailer, RV, Hi-Lo Forklift - For Home, Office & Business Applications - Indoor / Outdoor Use - What’s in the Box: - (3) Curb Ramps - Technical Specs: - Load Capacity: 11,000 lbs. MAX - Construction Materials: Engineered Synthetic Rubber.

• Ramp Height: 2.02''
• Overall: 144.75'' W x 16 Inches Ramp Length - End to End
• Overall Product Weight: 144.3lb.
• Weight Capacity: 11000lb.

Feels like a good product, but I wish it came with the bolts to stick the pieces together. I had to go shopping to find some that could work.. Anonymous. . 2022-04-26 23:28:46

【Keeps You from Being Troubled by Steps and Curb】- This rubber curb ramp allows your vehicles, wheelchairs, and carts to climb the slope easily. It is made of high-quality solid natural rubber material, which has strong compressive strength and is not easily deformed and can carry up to 15 tons of heavy vehicles uphill.

2 Pack Hydraulic Car Ramps 5T 11000lbs Low Profile Car Lift Service Ramps Truck Trailer Garage,Height Hydraulic Vehicle Ramps (Gray)

• 2 pcs ramps with 5 Ton hydraulic jack provides greater flexibility. It can be used for the maintenance and repair of cars.
• A hydraulic cylinder makes it easy to raise and lower the ramp.
• Made of sturdy steel, sturdy steel construction with approach edge.

Quickly and safely transport your power wheelchair or scooter with one of the most versatile, heavy-duty, and easy-to-use power wheelchair carriers on the market deluxe folding trailer hitch wheelchair carrier with a hitch adapter. The wheelchair rack attaches to any standard class III or IV hitch, includes a long three-position loading ramp, and comes with an innovative hitch adapter that allows you to adjust the height of the carrier to make loading easier and prevent bottoming out during transportation!

• Ramp Height: 11''
• Overall: 48'' W x 59.125 Inches Ramp Length - End to End
• Overall Product Weight: 112lb.
• Weight Capacity: 500lb.

It was easy to order and and to put on car haven’t actually used it yet but I’ll be using it Friday. Anonymous. . 2023-02-14 13:14:43

The edge o dock leveler permanently attaches to the face of a dock. It is recommended for docks to be at least 48 inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. A steel dock edge, or approach ramp is required for proper installation. The electric hydraulic edge-o-dock is the easiest to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend. The unit comes complete with motor, pump, control box, cylinder, lines and oil. The truck must pull out for leveler to return to stored position.

• Ramp Height: 5''
• Overall: 93'' W x 17.5 Inches Ramp Length - End to End
• Overall Product Weight: 558lb.
• Weight Capacity: 25000lb.

VEVOR Keeps You from Being Troubled by Steps and Curb：VEVOR rubber curb ramp allows your vehicles, wheelchairs, and carts to climb the slope easily. It is made of high-quality solid natural rubber material, which has strong compressive strength and is not easily deformed and can carry up to 15 tons of heavy vehicles uphill.

This portable ramp effortlessly bridges the gap for your mobility needs. Designed for convenient transport and use, this ramp is ideal for temporary or mobile applications where a sturdy, reliable surface is essential.

• Ramp Height: 1.88''
• Overall: 49.125'' W x 60 Inches Ramp Length - End to End
• Overall Product Weight: 36lb.
• Weight Capacity: 1500lb.

Great product for a good price.. Roger. Mt. Pleasant, TN. 2023-03-04 20:48:31

The edge o dock leveler permanently attaches to face of dock. It is recommended for docks to be at least forty-eight inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. Standard ramping is twenty-nine inches, with a thirty-six inch long ramping length available for smaller grade. A steel dock edge, or approach ramp is required for proper installation. The mechanical edge-o-dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

• Ramp Height: 5''
• Overall: 99'' W x 15 Inches Ramp Length - End to End
• Overall Product Weight: 510lb.
• Weight Capacity: 20000lb.

The molded rubber speed bump is ideal for warning drivers in parking areas and warehouses. Featuring reflective diagonal stripes and ‘cats eyes’ for visibility. A heavy-duty molded rubber construction for durability and pre-drilled installation holes. Mounting hardware included and optional end caps available upon request.

• Ramp Height: 1.75''
• Overall: 11.75'' W x 72 Inches Ramp Length - End to End
• Overall Product Weight: 51lb.
• Weight Capacity: 40000lb.

. David. NV. 2021-07-16 19:00:14

Aluminum Ramps-Easy to Transport and Load onto Trucks：Our 6,000 lbs capacity long aluminum loading ramp is perfect for transporting heavy vehicles to loading tools or over high steps. Its ultra-lightweight design allows for quick and easy setup. The stair-step anti-slip boards not only distribute weight evenly but also provide effective grip. Measuring 94" x 15", it is an essential tool for farms, factories, auto repair shops, and roadside assistance.