Showing results for "1.2 in. x 5.2 in. Clear Strobe Light 6 LEDS 3 1 Functionality ECCO ED3777W"

Black plugged in Led driver with constant voltage

• Constant Voltage - Input: 100-240V~0.5A MAX. Output: 12V~2.5A MAX, Per Port Output:12V~2.5A Max.

White plugged-in 36W dimmable LED driver with constant voltage.

The product delivers stable and energy-efficient, low-voltage power to any LED lighting installation. The constant voltage LED driver is designed using high-performance, professional-grade electronics that provide stable and efficient low-voltage power. The power supply is rated up to 12-watts at 12-volts. No minimum load required. Plug-in or hardwire with detachable AC power cord. Not compatible with 120V AC dimmers. For best results use Armacost Lighting LED products.

• Overall: 1.1875'' H x 5.25'' W x 1.6875'' D
• Product Type: Electronic
• Compatible Lighting: Undercabinet Lighting
• Location: Indoor Lighting
• Current Type: DC (Direct Current)

Great!. Winter. US. 2023-05-12 00:57:14

The product delivers stable energy-efficient, low-voltage power to any LED lighting installation. The constant voltage LED driver is designed using high-performance, professional-grade electronics that provide stable and efficient low-voltage power. The power supply is rated up to 12 watts at 12 volts. No minimum load is required. Plug-in or hardwire with a detachable AC power cord. Not compatible with 120V AC dimmers. For best results use Armacost Lighting LED products.

• Overall: 1.1875'' H x 5.25'' W x 1.6875'' D
• Product Type: Electronic
• Compatible Lighting: Undercabinet Lighting
• Location: Indoor Lighting
• Current Type: DC (Direct Current)

I want to tell you why I will no longer be doing business with you. I wanted some undercabinet lighting and your online description was severely limited. When the wiring arrived, it was just wire. So, I then ordered a a plug and electrical box. It didn't attach to anything. The description said I might need a transformer so I ordered it. Now I have all three "components" none of which work with each other. I want to return them. They all fit inside a small box. But you want me to return them to three different locations throughout the country, put these small items in three different boxes and pay three different return shipping fees totaling more than $22. If your descriptions were more inclusive in the first place, I could have made a much better decision and saved myself grief. In any case, it is much too difficult to deal with you compared to other online companies I have used.. Anonymous. . 2022-04-27 09:53:15

The Armacost Lighting’s 100 Watt; 24 Volt Standard LED Power Supply delivers stable and energy-efficient, low-voltage power to any LED lighting installation. The LED driver is designed using high-performance, professional grade electronics that provide stable and efficient low-voltage power. The power supply is rated up to 100-watts at 24-volts. No minimum load required. The power supply must be hardwired. Rated for both indoor and outdoor use. For best results use Armacost Lighting LED products.

• Uses an integrated microprocessor to optimize LED dimming performance based on load
• Automatic shut-off in case of lighting overload, open circuit, short circuit, over temperature or other fault
• Class 2 power supply features overload protection, automatic shut-off
• Limited 3-year warranty. Failure to use this power supply for its intended purpose or improper installation will void the warranty

The 12 Volt Wall Mount Power Supply from Armacost Lighting features a universal DC output barrel connector tip and comes with a 2 channel terminal block connector adapter to easily pair with LED strip lights. The durable LED driver is made with premium quality components to provide safe and stable voltage output. The plug-in style transformer is ideal for 12V LED Light Strips and 12 volt LED puck light installations, but can also be used for a range of compatible applications including speakers, subwoofers, cameras, audio amplifiers, cable boxes, and routers.

• 12V DC Power Supply Specs: Input: 100V-120V 50/60Hz, Output Voltage: DC 12 Volt (constant voltage), DC Terminal Connector: 5.5mm x 2.1mm
• 12 Watt Driver Output: Max 1A Current, Max 12W Wattage
• Safety features include full shut off protection in case of lighting overload, open circuit, short circuit, overtemperature or other fault
• Includes a female barrel with 2 Pin (2C) wire connector for 12V LED light installations
• Universal DC output barrel connector has broad compatibility with other electrical components

Armacost lighting 60-watt dimmable LED driver provides outstanding LED dimming performance and architectural-quality brightness control. Although virtually all dimmers will work with this dimmable LED driver, Armacost Lighting recommends Lutron CFL and Leviton ill match universal dimmers because of their low-end dimming range adjustment. Delivers smooth, stable, flicker-free dimming with soft start and desirable fade-on and fade-to-dark performance. When a dimmer is set to full brightness, LED driver delivers full brightness – there is no loss of top-end light output. Direct wire. Driver has full safety shut off protection in case of lighting overload, open circuit, short circuit, over-temperature, or other fault, automatic restart after the fault has been corrected this is a listed class 2 power unit for safety and has class II AC inputs, fully isolated case, no ground wire is required. Indoor/outdoor, etc. Listed for use in dry and damp locations. To work properly, your LED lighting must operate on 12-volt dc power and be able to be dimmed. This driver works well with all 12V dc LED tape lighting. For other types of LED lighting contact the manufacturer to confirm you lighting is dimmable and it operates on 12-volt dc power.

• Overall: 1.57'' H x 2.25'' W x 6.52'' D
• Product Type: Electronic
• Compatible Lighting: Undercabinet Lighting
• Location: Indoor Lighting
• Current Type: DC (Direct Current)

. Lori. Elizabethtown, PA. 2021-06-09 06:50:44

The Armacost Lighting 60-Watt; 24-Volt Universal Dimming LED Power Supply delivers stable and energy-efficient, low-voltage power to any LED lighting installation. The LED driver is designed using high-performance, professional grade electronics that provide stable 0 or 100% dimming free of any “pop-on” or “drop-off”. The power supply is rated up to 60-watts at 24-volts. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations. Includes: 1) 60W, 24V Power Supply, 1) Detachable AC Power Cord

• Overall: 1.38'' H x 2.38'' W x 7.63'' D
• Product Type: Electronic
• Compatible Lighting: Undercabinet Lighting; Track Lighting and Ceiling Lighting
• Location: Indoor Lighting; Remote Mount
• Current Type: DC (Direct Current); AC (Alternating Current)

. Lisa. Kimball, MI. 2022-08-22 16:11:27

The Armacost Lighting 120 watts; 12-volt universal dimming led power supply delivers stable and energy-efficient, low-voltage power to any led lighting installation. The led lighting driver is designed using high-performance, professional-grade electronics that provide stable 0 or 100% dimming free of any “pop-on” or “drop-off”. The power supply is rated up to 120 watts at 12 volts. For the best results use Armacost lighting led lights, switches, and dimming light controls. Plug-in or hardwire with a detachable ac power cord. Suitable for both dry and wet locations. Enclosure option available. Includes: 1) 120w, 12v power supply

• Overall: 2.47'' H x 9.45'' W x 2.92'' D
• Product Type: Electronic
• Compatible Lighting: Landscape Lighting
• Location: Outdoor Lighting
• Current Type: DC (Direct Current)

White plugged in Led driver with constant voltage

• 【Constant Voltage】Input: 100-240V~0.5A MAX. Output: 24V~2.5A MAX 22W, Per Port Output:24V~2.5A Max 22W.

100W 24V Led Power Supply 100V-240V AC to 24V DC Converter Constant Voltage LED Transformer with 24V JST Ports, ETL Listed White Dimmable LED Driver 24V for LED Strip Lights and Cabinet Lights…

The Armacost Lighting 24 Watt; 12 Volt Universal Dimming LED Power Supply delivers stable and energy-efficient, low-voltage power to any LED lighting installation. The LED lighting driver is designed using high-performance, professional-grade electronics that provide stable 0 or 100% dimming free of any “pop-on” or “drop-off”. The power supply is rated up to 24-watts at 12-volts. For the best results use Armacost Lighting LED lights, switches, and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations. Includes 1) 24W, 12V Power Supply, 1) Detachable AC Power Cord

• Overall: 2.13'' H x 0.06'' W x 0.75'' D
• Product Type: Electronic
• Current Type: DC (Direct Current); AC (Alternating Current)

Came quickly. Wish the electrician was as fast, then well see how it works. Pam. Greeley, CO. 2021-02-09 16:48:52