The GENIUS is a fixed low-profile TV wall mount for screens from 14" to 75", rated at 220 lbs (100 kg). When installed, the TV sits 1.38 inches (3.5cm) from the wall — no arm, no visible bracket gap from the side. VESA compatibility spans 75×75mm to 800×400mm, covering every standard mounting pattern from compact displays to large-screen panels. Locking quick-release system for secure installation and easy cable access without uninstalling. Carbon steel and reinforced nylon construction with electrostatic epoxy anti-corrosion coating.
`<b>How close does the GENIUS sit to the wall — what does it look like installed?</b>`
At 1.38 inches (3.5cm), the TV sits closer to the wall than most fixed mounts, which typically hold the TV 1.5"–2" from the surface. From the front, the TV appears flush against the wall with no visible bracket hardware. From the side, the gap between screen edge and wall surface is minimal. This is what's typically called a "picture frame" installation — the TV looks integrated into the wall rather than mounted on hardware. The GENIUS supports both flat and curved panels at this distance.
`<b>Will this hold my TV — how do I check weight and VESA compatibility? </b>`
The GENIUS holds up to 220 lbs (100 kg) — approximately double the 99–130 lbs capacity standard in this category. A 75" TV typically weighs 80–120 lbs; the GENIUS covers the full weight range for any standard 75" panel. For VESA compatibility, the mount supports patterns from 75×75mm to 800×400mm, covering virtually every TV produced from 14" to 75". Check the VESA pattern on the label on the back of your TV, or in the owner's manual — it lists horizontal and vertical bolt spacing in millimeters. Most 55"–75" TVs use VESA 400×400mm or 600×400mm; both supported.
`<b>How does the locking quick-release system work?</b>`
The mount uses a two-part system: a wall bracket installs permanently on the wall, and a TV bracket attaches to the back of your TV. To hang the TV, hook the TV bracket onto the wall bracket and slide into position — the safety lock engages to prevent accidental displacement. The 4-point bracket holds the TV securely under load. To access ports behind the TV (HDMI, USB, power), release the safety lock, tilt the TV forward slightly, and re-engage when done. This eliminates the need to fully uninstall from the wall every time you need to add or swap a cable.
`<b>What stud widths does it fit — and can it mount on brick or concrete? </b>`
The GENIUS bracket spans 12", 16", 18", and 24" wood stud spacings without adapters. Standard residential construction uses 16" spacing, but older homes and custom-framed walls commonly use 12", 18", or 24". The mount also installs on brick and concrete using masonry hardware included in the kit. The included installation template marks exact drill points before you commit to holes — especially useful on masonry where repositioning is not practical after drilling.
`<b>What's in the box?</b>`
The box includes: wall mount bracket, TV bracket, complete hardware for wall installation (wood stud and masonry), complete hardware for attaching to your TV's VESA pattern, installation template for marking drill points, bubble level for alignment, and installation manual. Everything needed for a standard installation is included. Compatible with flat and curved TVs from 14" to 75" with VESA patterns from 75×75mm to 800×400mm, up to 220 lbs (100 kg).
Built by ELG, specializing in AV and ergonomic mounting solutions since 2002. Products available in 30+ countries.
or
