Passage Pull & Push Plate Door Hardware

This mortise cup closet door pull is constructed of stamped steel and comes finished in satin nickel. The outside diameter of this pull is 1-3/4 inch and it has a depth of 5/16 inch. These mortise cups set flush in the door and are used on by-passing closet panel doors to provide a pull for ease of opening and closing, and it they are used by many manufacturers. This item includes 2 pulls and 4 nails per package. Installation tip: to avoid damaging the pulls during installation; use a pair of needle nose pliers to hold the nails while hammering, then finish driving the nails with a nail set to seat them in place. Silicone glue may be required if the hole has worn larger.

Moved into a hone that had hard plastic finger pulls on every closet door that were original to the house and so yellowed. These were a godsend and made our doors look great.. Margaret. Springfield, PA. Sun May 16 2021

Our contemporary designed 48" Square Offset Door Pull featured in a brushed nickel finish with a 1” diameter pull is able to fit glass and wood doors ranging in thickness of 3/8”, 1 ¾”, or 2 ¼” with 48” center to center holes.

Perfect Handles for new Impact Doors installed in our clients home!. Gabe. Tue Jun 06 2023

Sliding and pocket door hardware. Linnea elevates architectural hardware by crafting high-quality stainless steel products in contemporary designs, whose features are fine-tuned to reflect our daily interactions. Linnea hardware has a variety of superior lifetime finishes that deliver an exceptionally clean, modern, and contemporary look for a wide selection of exterior and interior designs.

It looked and felt great but didnt match the antique nickel hardware colors exactly. Had to return.. Malika. Aurora, IL. Mon Jun 22 2026

Our Rockwell Back to Back Ladder Pull in a polished chrome finish for Heavy Glass Frameless Shower Doors features a total length of either 10" or 12” with a tube diameter of ¾” and a projection of 2 ¼”. Able to fit shower glass doors with a thickness of ¼” to ½” with glass cutouts of ½” in diameter that are offered either 6" or 8″ apart.

Bigger and heavier than expected. Very nice handle!. Anonymous. Sat Nov 22 2025

To ensure the safety of people's lives and building safety, it is necessary to install a pusher on the door of the safe passage. This is a push bar made of high-quality 304 stainless steel, with good corrosion resistance and fire resistance, even if an accident occurs, it can open a life passage for the masses!

Linnea elevates architectural hardware by crafting high-quality stainless steel products in contemporary designs, whose features are fine-tuned to reflect our daily interactions. Linnea hardware has a variety of superior lifetime PVD finishes that deliver an exceptionally clean, modern, and contemporary look for a wide selection of exterior and interior designs.

Fantastic quality and workmanship, will be purchasing another.. Sean. Guelph, ON. Wed Feb 03 2021

Our Rockwell 8" Mitered Corner Back to Back Pull in an oil rubbed bronze finish for Heavy Glass Frameless Shower Doors features a sleek mitred corner design and a tube diameter of ¾”. Able to fit shower glass doors with a thickness of ¼” to ½” with glass cutouts of ½” in diameter that are 8” apart.

Exactly as described. I was replacing a prior 8" shower handle. This is a great fit, clear instructions, and easy install. Looks great!. Krystle. Seattle, WA. Sun Feb 11 2024

Our Rockwell 8" Mitered Corner Back to Back Pulls in a polished chrome finish for Heavy Glass Frameless Shower Doors features a sleek mitered corner design and a tube diameter of ¾”. Able to fit shower glass doors with a thickness of ¼” to ½” with glass cutouts of ½” in diameter that are 8” apart.

Beautiful product. Excellent customer service!!. Diana. Brentwood, NY. Sat Sep 11 2021

This mortise cup closet door pull is constructed of stamped steel and comes finished in chrome. The outside diameter of these pulls have 2 different diameters with a depth of 5/16 inch. These mortise cups set flush in the door and are used on by-passing closet panel doors to provide a pull for ease of opening and closing, and it they are used by many manufacturers. This item includes 2 pulls and 4 nails per package. Installation tip: to avoid damaging the pulls during installation; use a pair of needle nose pliers to hold the nails while hammering, then finish driving the nails with a nail set to seat them in place. Silicone glue may be required if the hole has worn larger.

Perfect! Converted a door to a barn and fit perfectly in existing handle hole. Rahmi. Ponte Vedra Beach, FL. Wed Oct 21 2020

This Bypass Door Finger Pull is constructed from steel and comes plated in brass. It comes complete with fasteners for a quick and easy installation.

Erikaantoinne. Miami, FL. Wed Dec 02 2020

This mortise cup closet door pull is constructed of solid brass and comes finished in classic bronze. The outside diameter of this pull is 3/4 inch and it has a depth of 5/16 inch. These mortise cups set flush in the door and are used on by-passing closet panel doors to provide a pull for ease of opening and closing, and it they are used by many manufacturers. This item includes 4 pulls per package. Installation tip: to avoid damaging the pulls during installation; use a soft mallet while hammering. Silicone glue may be required if the hole has worn larger.

Easy to install and looks good. Maria. US. Thu Jun 29 2023

This mortise cup closet door pull is constructed of stamped steel and comes finished in satin nickel. The outside diameter of this pull is 2-1/8 inch and it has a depth of 5/16 inch. These mortise cups set flush in the door and are used on by-passing closet panel doors to provide a pull for ease of opening and closing, and it they are used by many manufacturers. This item includes 2 pulls and 4 nails per package. Installation tip: to avoid damaging the pulls during installation; use a pair of needle nose pliers to hold the nails while hammering, then finish driving the nails with a nail set to seat them in place. Silicone glue may be required if the hole has worn larger.

This mortise cup closet door pull is constructed of stamped steel and comes finished in classic bronze. The outside diameter of this pull is 2 inch and it has a depth of 5/16 inch. These mortise cups set flush in the door and are used on by-passing closet panel doors to provide a pull for ease of opening and closing, and it they are used by many manufacturers. This item includes 2 pulls and 4 nails per package. Installation tip: to avoid damaging the pulls during installation; use a pair of needle nose pliers to hold the nails while hammering, then finish driving the nails with a nail set to seat them in place. Silicone glue may be required if the hole has worn larger.

Will serve its purpose have yet to install.. Lorraine. Chatsworth, CA. Fri Feb 12 2021

This mortise cup closet door pull is constructed of stamped steel and comes finished in classic bronze. The outside diameter of this pull is 2-1/8 inch and it has a depth of 5/16 inch. These mortise cups set flush in the door and are used on by-passing closet panel doors to provide a pull for ease of opening and closing, and it they are used by many manufacturers. This item includes 2 pulls and 4 nails per package. Installation tip: to avoid damaging the pulls during installation; use a pair of needle nose pliers to hold the nails while hammering, then finish driving the nails with a nail set to seat them in place. Silicone glue may be required if the hole has worn larger.

Hard to find color combo...a bit pricey for what you get, but It is a more hard to find item. Michael. Greenfield, WI. Fri Apr 17 2020

This mortise cup closet door pull is constructed of stamped steel and comes finished in satin nickel. The outside diameter of this pull is 2 inch and it has a depth of 5/16 inch. These mortise cups set flush in the door and are used on by-passing closet panel doors to provide a pull for ease of opening and closing, and it they are used by many manufacturers. This item includes 2 pulls and 4 nails per package. Installation tip: to avoid damaging the pulls during installation; use a pair of needle nose pliers to hold the nails while hammering, then finish driving the nails with a nail set to seat them in place. Silicone glue may be required if the hole has worn larger.

Well it goes for one of the closet doors I bought. I like how it has picture directions as well. Brandi Jon. Hot Springs Village, AR. Thu Aug 15 2019

This mortise cup closet door pull is constructed of solid brass and comes finished in matte black. The outside diameter of this pull is 2-1/8 inch and it has a depth of 5/16 inch. These mortise cups set flush in the door and are used on by-passing closet panel doors to provide a pull for ease of opening and closing, and it they are used by many manufacturers. This item includes 2 pulls and 4 nails per package. Installation tip: to avoid damaging the pulls during installation; use a pair of needle nose pliers to hold the nails while hammering, then finish driving the nails with a nail set to seat them in place. Silicone glue may be required if the hole has worn larger.

Easy to install and color match is just right.. Rita. Denver, CO. Mon Oct 26 2020

This Closet Door Pull Handle is constructed from steel and comes plated in brass. It features a rectangular design. It comes complete with fasteners for a quick and easy installation.

Gal. Cherry Hill, NJ. Mon Jan 02 2023

This mortise cup closet door pull is constructed of stamped steel and comes finished in brass. The outside diameter of this pull is 3/4 inch and it has a depth of 5/16 inch. These mortise cups set flush in the door and are used on by-passing closet panel doors to provide a pull for ease of opening and closing, and it they are used by many manufacturers. This item includes 4 pulls per package. Installation tip: to avoid damaging the pulls during installation; use a soft mallet while hammering. Silicone glue may be required if the hole has worn larger.

Easy to install. No instruction needed.. Cari. Fri May 08 2020

This mortise cup closet door pull is constructed of stamped steel and comes finished in antique brass. The outside diameter of this pull is 3/4 inch and it has a depth of 5/16 inch. These mortise cups set flush in the door and are used on by-passing closet panel doors to provide a pull for ease of opening and closing, and it they are used by many manufacturers. This item includes 4 pulls per package. Installation tip: to avoid damaging the pulls during installation; use a soft mallet while hammering. Silicone glue may be required if the hole has worn larger.

Perfect for our decor. Deborah. Shelton, CT. Sun Jul 18 2021

This mortise cup closet door pull is constructed of solid brass and comes finished in satin nickel. The outside diameter of this pull is 2-1/8 inch and it has a depth of 5/16 inch. These mortise cups set flush in the door and are used on by-passing closet panel doors to provide a pull for ease of opening and closing, and it they are used by many manufacturers. This item includes 2 pulls and 4 nails per package. Installation tip: to avoid damaging the pulls during installation; use a pair of needle nose pliers to hold the nails while hammering, then finish driving the nails with a nail set to seat them in place. Silicone glue may be required if the hole has worn larger.

Changed all door handles and pulls. Easily installed.. Frankie. Richmond, CA. Tue May 17 2022

Replace or repair a broken closet door with this Prime-Line N 7743  Closet Pulls. This closet door pull comes complete with fasteners for a quick and easy installation. Constructed from solid brass with a classic bronze  finish, these sliding door pulls are strong, durable, and built to last. This closet door handle pull measures 3-1/4 inches in height and 1-3/8 inches in width with a 3/8 inch depth. For further closet sliding door handle dimensional information, please see the line drawing.

Looks great and very high quality. Slowly replacing all of the shiny brass from the ‘90s and changing out the little hardware bits goes a long way to updating our new old house.. Elizabeth. Arnold, MD. Sat Apr 08 2023

Rockwell Modena Series Sliding Patio Door Handles are a premium, aesthetically styled handleset available at a great value for the discerning customer.

This is a rectangular, solid brass wardrobe door pull with a stylish satin nickel finish. The rectangular face is 1-3/8 inch wide and 3-1/4 inch tall with an oblong inset finger pull stamped within. Oblong inset fits into a 7/8 inch by 2-5/8 inch mortise in the side of the door. Rectangular face gives a nice finish to the handle's installation. Two handles and fasteners are included in each sealed package for a complete installation.

Perfect for my new pocket door. After renovating an old door and turning it into my laundry room door, I needed some type of pulls. I did not need the normal locking pocket door hardware and I hate the look of those round closet door pulls. Found these... they are perfect. Takes a bit more time to install them since they aren’t the standard round but well worth it.. Lisa. Salem, OR. Thu Feb 07 2019

Our contemporarily designed 48" Square Offset Door Pull featured in a black finish with a 1” diameter pull can fit glass and wood doors ranging in thickness from 3/8”, 1 ¾”, or 2 ¼”, fits doors with 48" center-to-center holes.

Very nice addition to make a statement to doors.. Barbara. Cape Coral, FL. Sat Aug 22 2026

Mit unserem Schiebetürbeschlag kannst du die Schiebetüren deiner Scheune, Küche, deines Arbeitszimmers usw. sanft, leise und mühelos öffnen und schließen. Erstklassiges Material: Die Gleitschienen bestehen aus pulverbeschichtetem Stahl, der robust, langlebig und strapazierfähig ist. Kompaktes Design: Der Schiebetürbeschlag passt mit seinem kompakten, zeitlosen Design zu nahezu jeder Einrichtung. Sicher und zuverlässig: Dank der innenliegenden Lager gleiten deine Türen sanft und leise. Türstopper sind ebenfalls im Lieferumfang enthalten, um das Entgleisen der Rollen zu verhindern, während die Gummidichtungen den Stoß der Rollen dämpfen und das Geräusch reduzieren. Stabil: Das Schiebetüren-Beschlagset umfasst auch eine Bodenführung, um die Bewegung der Tür zu stabilisieren. Hinweis:Die Tür ist nicht im Lieferumfang enthalten.

This mortise cup closet door pull is constructed of solid brass and comes in a beautiful finish. The outside diameter of this pull is 3/4 inch and it has a depth of 5/16 inch. These mortise cups set flush in the door and are used on by-passing closet panel doors to provide a pull for ease of opening and closing, and it they are used by many manufacturers. This item includes 4 pulls per package. Installation tip: to avoid damaging the pulls during installation; use a soft mallet while hammering. Silicone glue may be required if the hole has worn larger.

I tried looking everwhere for these. The fit perfectly. Jacqueline. Smithfield, RI. Sat Sep 19 2020