Prime-Line Cabinet & Drawer Hardware

These shelf support pegs by Prime-Line Products are constructed from heavy-duty steel and come in a brass-plated finish. These types of shelf support pegs are commonly used in bookcases, stereo and storage cabinets to support adjustable glass and wood shelving at up to 25 pounds per support peg. These shelf support pegs feature a 1/4 inch peg diameter and they are easy to install. Use pliers to remove any stubborn/stuck pegs. Avoid using levels where hole's diameter has been widened.

These magnetic cabinet door catches are constructed of plastic housings and steel strike plates which come in a bronze-plated finish. Each catch features strong-attracting magnetized plates, and with the slotted installation holes- the base of each catch is fully adjustable during installation. These catch and keepers work great for securing your cabinet and cupboard doors in your recreational vehicle, and everywhere else in the home, office and classroom. These cabinet and cupboard catches are easy to install and are used by many.

These shelf support pegs are constructed from heavy-duty steel and come plated in a bright nickel finish. They are designed to fit into 5 mm. (3/16 in.) diameter holes, making them perfect for most metrically sized imported cabinets and bookshelves. Each peg has a 25 lb. maximum safe load. Can be used for many heavier-duty applications such as in furniture with glass shelves. Shelf support pegs are easy to install and are used by a variety of manufacturers.

Does what I needed it to. Jessica. Sat Aug 24 2024

These are high performance self-adhesive cover caps for covering unsightly screw holes provide the finishing touch with a long lasting permanent bond. Caps measure 9/16 in. outside diameter and are made of real unfinished pine wood. Package contents include 53 caps per package.

I bought this item to help me repair screw holes and it worked beautifully. It is stainable or as I chose paintable. Charlrs. Newark, DE. Fri Mar 29 2024

These shelf pegs are constructed of plastic and come white. The 5 mm. outside diameter pegs have a 1/4 in. depth and they can support a maximum of 5 lbs. each, per peg. These pegs are easy to install.

This is plastic plate is used to hold the track to the back of the cabinet. The 1 in. square cavity allows for self-aligning of the drawer when closing. Mounts on the back of the cabinet to support track. These backplates are constructed from blue plastic.

These cabinet knob backplates are constructed of stamped steel and come in an antique brass plated finish. Backplates like these are used on both cabinet doors and drawer faces to prevent the wearing of finished wood, and the unsightly accumulation of dirt and grime. They feature a large 2-13/16 in. outside diameter and they project outward a total of 3/16 in. These cabinet knob backplates do not include any installation fasteners, but they come with pre-punched holes for quick and easy installation.

They are an excellent choice for plugging unused and unsightly holes in white finished cabinetry and they are simple to install.

This is a set of one pair of drawer slides for use in 22 in. deep drawer cabinets. They have a maximum safe load capacity of 75 lbs.

Great product Fast delivery. Anonymous. Sun Jul 13 2025

These Prime-Line U 101698 Steel Shelf Support Pegs make sure your shelves stay in place, with a 20 pound maximum safe load per peg. Constructed of steel, the shelving pegs come with a black finish and are strong and durable. These shelving support pegs are easy to install and used in many shelf support applications. Each shelving peg has a 1/4 inch diameter with 5/32 inch screw mounting hole. For further dimensional information, please see the line drawing.

These shelf support pegs from Prime-Line are constructed from heavy-duty steel and come plated in a brass plated finish. They are designed to fit into 7mm (9/32 in.) diameter holes, making them perfect for most metrically sized imported cabinets and bookshelves. These pegs feature a 25-pound (per peg) maximum safe load capacity and can be used for many heavier-duty applications such as in furniture with glass shelves. These shelf support pegs are easy to install and are used by many manufacturers.

This is a ball bullet catch and strike. Features a mortise installation fitting 1 in. and above thick panels. Used on interior swinging closet or other utility doors.

These shelf support pegs by Prime-Line Products are constructed from heavy-duty steel and come in a brass-plated finish. These types of shelf support pegs are commonly used in bookcases, stereo and storage cabinets to support adjustable glass and wood shelving at up to 25 pounds per support peg. These shelf support pegs feature a 5 millimeter peg diameter and they are easy to install. Use pliers to remove any stubborn/stuck pegs. Avoid using levels where hole's diameter has been widened.

These shelf support pegs by Prime-Line Products are constructed from heavy-duty steel and come in a brass-plated finish. These types of shelf support pegs are commonly used in bookcases, stereo and storage cabinets to support adjustable glass and wood shelving at up to 25 pounds per support peg. These shelf support pegs feature a 5 millimeter peg diameter and they are easy to install. Use pliers to remove any stubborn/stuck pegs. Avoid using levels where hole's diameter has been widened.

These are high performance self-adhesive cover caps for covering unsightly screw holes provide the finishing touch with a long lasting permanent bond. Caps measure 9/16 inch outside diameter and are made of durable PVC material and include 53 caps per package.

These wall brackets are constructed of zinc alloy (cast zamak) and they come in a chrome plated finish. They feature a single ear that can be mounted to the left or right side of the panel, and they have a 2-1/2 in. overall reach, with a 2-3/4 in. wide base. These one ear panel brackets are designed for use with 1-1/4 in. thick panels, and they are commonly used to replace broken, or missing wall brackets. Wall brackets like these are manufactured in various dimensions for use with different panel thicknesses, as well as in alternate finishes. These restroom partition wall brackets are used by many, and they are simple to install. This item includes all the fasteners necessary for its complete installation. The T-27 Torx security fasteners included with this item feature tamper-resistant 6-lobe security drives with center pins.

It mounts on the left side of your drawer when viewed from the rear. Contains 2 rollers and includes fasteners for a quick and easy installation.

These wall brackets are constructed of zinc alloy (cast zamak) and they come in a chrome plated finish. This repair kit includes a total of two (2) U brackets, and two (2) two-ear wall brackets, together with all the fasteners necessary for their complete installation. All brackets in this kit are designed for use with 1-inch thick restroom partition panels. The two-ear brackets have a 2-1/2 inch overall reach, with a 4-inch wide base. The U brackets feature a 4-hole mounting base, an overall reach of 1-3/8 inch, and 1-1/4 inch wide bases. Besides being used for new installs, brackets like these are commonly used to repair and replace broken, or missing wall brackets. Wall brackets like these are manufactured with various dimensions for use with different panel thicknesses, as well as in alternate finishes. These restroom partition wall brackets are used by many, and they are simple to install. The T-27 Torx security fasteners included with this item feature tamper-resistant 6-lobe security drives with center pins.

These shelf pegs are made of durable plastic and come in a brown color, with a 5 mm outside diameter and a 1/4-inch depth, designed to support shelving with a maximum weight capacity of 5 pounds per peg. The pegs feature a serrated design for secure installation and have a 1/2-inch reach, making them easy to install and reliable for holding shelves. Sold in a convenient 12-pack, these pegs are an ideal choice for shelving systems.

These wall brackets are constructed of zinc alloy (cast zamak) and they come in a chrome plated finish. This repair kit includes a total of two (2) U brackets, and two (2) one-ear wall brackets, together with all the fasteners necessary for their complete installation. All brackets in this kit are designed for use with 1 inch thick restroom partition panels. The single ear brackets can be mounted to the left or right side of the panels, and they have a 2-1/2 inch overall reach, with a 2-11/16 inch wide base. The U brackets feature a 4-hole mounting base, an overall reach of 1-5/16 inch, and 1-1/4 inch wide bases. Besides being used for new installs, brackets like these are commonly used to repair and replace broken, or missing wall brackets. Wall brackets like these are manufactured with various dimensions for use with different panel thicknesses, as well as in alternate finishes. These restroom partition wall brackets are used by many, and they are simple to install. The T-27 Torx security fasteners included with this item feature tamper-resistant 6-lobe security drives with center pins.

The Prime-Line MP4711 Diecast 5 Pin NA-14 Keyway Mailbox Lock and Key Set makes it easy to secure your mail. It is designed for use with mailboxes manufactured by C 9200. The mailbox key set comes complete with a 5 pin mailbox lock, 1 cam, and 2 keys. These multi-cam assortments eliminate the need for individual locks. The mailbox key lock set is constructed of diecast, brass, steel, and stamped steel materials. It features a spring steel locking clip. The steel components come finished in a corrosion-resistant zinc-plated finish. The cylinder face comes in a zinc-plated finish. The lock is easy to install with only a few simple tools. Please refer to the line art drawing for dimensions and compare with your needs before purchasing.

The Prime-Line MP4710 Diecast 5 Pin NA-14 Keyway Mailbox Lock and Key Set makes it easy to secure your mail. It is designed for use with mailboxes manufactured by C 9100. The mailbox key set comes complete with a 5 pin mailbox lock, 1 cam, and 2 keys. These multi-cam assortments eliminate the need for individual locks. The mailbox key lock set is constructed of diecast, brass, steel, and stamped steel materials. It features a spring steel locking clip. The steel components come finished in a corrosion-resistant zinc-plated finish. The cylinder face comes in a zinc-plated finish. The lock is easy to install with only a few simple tools. Please refer to the line art drawing for dimensions and compare with your needs before purchasing.

Can be used in a variety of applications, from locking a gate to a cabinet or even a truck box.

This drawer and cabinet lock is constructed of a diecast cylinder and stamped steel mounting plate. The lock comes in a brass-plated finish and it fits up to a 7/8 in. thick panel. The lock cylinder uses a Chicago keyway, ILCO (1041T) and it comes complete with two keys, a keeper and installation fasteners. Can be used on both cabinet doors and drawers. Not available keyed alike.

Absolutely beautiful lock that fit the missing one in a favorite old desk perfectly, but the keys were very poor quality. Not brass as shown, but some kind of pot metal that appeared to be punched, not cut. Edges were very rough and I had to have them smoothed.. Anonymous. Wed Mar 26 2025

Prime‑Line® sheet metal screws are designed to provide strong, secure fastening for metal‑to‑metal and metal‑to‑wood applications commonly found in home repair, maintenance, and installation projects. Featuring sharp, self‑tapping threads, these screws cut cleanly into thin metal, plastic, or wood without the need for pre‑tapping, delivering reliable holding power and consistent performance. Ideal for securing HVAC ductwork, metal panels, appliances, fixtures, electrical boxes, and general household hardware, Prime‑Line sheet metal screws install easily using standard hand or power tools. Manufactured from quality materials for durability and corrosion resistance, they perform well in both indoor and outdoor environments. Trusted by DIY homeowners and professionals across the U.S., Prime‑Line sheet metal screws make fastening fast, efficient, and dependable.

This mailbox lock is constructed from diecast and it comes in a nickel plated finish. It uses ILCO 10003M as used by Cutler Federal, and it is keyed different from others. This mailbox lock includes two keys, one cam and a spring steel locking clip. The key for this lock rotates in a counter clockwise direction to engage lock.

The Prime-Line MP4140 Diecast 5 Pin Hudson Keyway Mailbox Lock and Key Set makes it easy to secure your mail. It is designed for use with mailboxes manufactured by American Device, Auth-Florence, Bommer and Miami-Carey. The mailbox key set comes complete with a 5 pin mailbox lock, 5 cams, and 2 keys. These multi-cam assortments eliminate the need for individual locks. The mailbox key lock set is constructed of diecast, brass, steel, and stamped steel materials. It features a spring steel locking clip. The steel components come finished in a corrosion-resistant zinc-plated finish. The cylinder face comes in a nickel-plated finish. The lock is easy to install with a few simple tools. Please refer to the line art drawing for dimensions and compare with your needs before purchasing.

The Prime-Line MP4130 Diecast 5 Pin Hudson Keyway Mailbox Lock and Key Set makes it easy to secure your mail. It is designed for use with mailboxes manufactured by Florence and C-8715. The mailbox key set comes complete with a 5 pin mailbox lock, 1 cam, and 2 keys. These multi-cam assortments eliminate the need for individual locks. The mailbox key lock set is constructed of diecast, brass, steel, and stamped steel materials. It features a spring steel locking clip. The steel components come finished in a corrosion-resistant zinc-plated finish. The cylinder face comes in a zinc-plated finish. The lock is easy to install with only a few simple tools. Please refer to the line art drawing for dimensions and compare with your needs before purchasing.

This is a cabinet door pull handle. It comes with a chrome-plated finish and mounting holes 3 in. on the center. Used by a variety of RV and cabinet manufacturers. Screws are included for easy installation.

These cabinet knob backplates are constructed of stamped steel and come in a polished brass plated finish. Backplates like these are used on both cabinet doors and drawer faces to prevent the wearing of finished wood, and the unsightly accumulation of dirt and grime. They feature a large 2-13/16 in. outside diameter and they project outward a total of 3/16 in. These cabinet knob backplates do not include any installation fasteners, but they come with pre-punched holes for quick and easy installation.

These rear drawer track sockets are constructed from durable plastic and come white in color. It fits on most side-mounted drawer track systems. This style of drawer track support brackets accepts most ball-bearing drawer slides allowing for front-to-back adjustment of the drawer slides. Installation is quick and easy, and all fasteners are included. The maximum load rating is 75 lbs. per pair.

This is a shelf peg. Typically these are used to support shelves in cabinets, bookshelves, and other storage units. They are constructed from mold-injected beige plastic. Each package contains 12 shelf support pegs. The pin will fit into a 1/4 in. hole and each peg has a maximum safe load capacity of 5 lbs. each. Dimensions of the pegs are 1 in. in height, 1/4 in. diameter peg that is 5/16 in. in length with a 1/2 in wide and 1/2 in. long lip to hold your shelves. No tools are required to install or remove these pegs.

This showcase and pass-thru window lock is constructed of steel and diecast metal components. Comes in a chrome plated finish. It features a 9/16 in. tall locking bar that extends 5-1/2 in. long, and it can fit on showcase glass panels up to 5/16 in. thick. This lock is fully adjustable to accommodate a variety of various closing alignments. It is easy to install, and uses an ILCO 1000X keyway. Keys are included with locking device.

This Prime-Line R 7132 is a center roller for Mono-rail drawer track slide system. Kit easily mounts to the back of your drawers for smoother operation. The kit includes 2 rollers and screws. Rollers feature sturdy plastic and steel construction.

These shelf support pegs are constructed from steel and come finished in a nickel plated color. They are designed to attach to Knape & Vogt 255 & 233 Pilaster standards. Each peg has a 20 lb. maximum safe load capacity. Can be used in a variety of applications. Shelf support pegs are easy to install and are used by a variety of manufacturers.

Just what I ordered. Barbara. Newark De. Fri May 01 2026

The Prime-Line MP4526 Diecast 5 Pin National Keyway Mailbox Lock and Key Set makes it easy to secure your mail. It is designed for use with mailboxes manufactured by Auth-Electric, Bommer, Cutler-Federal, Florence and Superior. The mailbox key set comes complete with a 5 pin mailbox lock, 5 cams, and 2 keys. These multi-cam assortments eliminate the need for individual locks. The mailbox key lock set is constructed of diecast, brass, steel, and stamped steel materials. It features a spring steel locking clip. The steel components come finished in a corrosion-resistant zinc-plated finish. The cylinder face comes in a zinc-plated finish. The lock is easy to install with a few simple tools. Please refer to the line art drawing for dimensions and compare with your needs before purchasing.

This kit is constructed of a wooden track, steel brackets and a plastic guide and back plate, together with all the parts necessary to repair one wooden drawer track system. This track restores smooth operation to track mounted drawers, and it can be used for top or bottom mount installations. This universal kit allows the 24 inch wooden track to be cut down to size to accommodate for shorter drawer applications. The white plastic saddles are used to replace worn or missing guide buttons, enabling the drawers to glide easily while at the same time preventing wear on the cabinet’s face frame or drawer opening. This track system is used by many to replace missing or malfunctioning drawer track hardware.

This is a plastic backplate that can be inverted for self-adjusting application. For use on "hat-section" style track and rolled edge and most other center mount tracks.

This Defender Security U 9941KA File Drawer Lock makes it easy to secure your drawers, important files, and small items. It is constructed of diecast and steel components with a stainless steel finish, perfect for keeping your small items safe. These locks for cabinets feature a 3/4 inch outside cylinder diameter with a 5/8 inch length that will accommodate up to 5/16 inch thick panels. Installation is simple and easy. This drawer and cabinet lock keyed alike can be mounted to metal or wood on doors or drawer panels. It comes complete with three cams, a trim collar, two reversible rotation washers, and two keys and fasteners. The drawer safety lock is keyed alike with a Yale Y-11 keyway. For further dimensional information, please see the line drawing.

Secure your drawers, cabinets, and small personal items with the Prime-Line U 9945KA Drawer and Cabinet Lock. Designed for versatility and reliability, this lock is ideal for protecting important files, valuables, and everyday essentials in both residential and office settings. It can be installed on wood or metal doors and drawers, making it a flexible security solution for a wide range of applications. Constructed from durable diecast and steel components, this cabinet lock is built for long-lasting performance. The stainless steel finish provides a clean, modern look while offering resistance to wear and corrosion, ensuring dependable use over time. The precision 5-pin design with a Yale Y-11 keyway adds an extra layer of protection, helping keep contents secure. This lock features a 3/4 inch outside cylinder diameter and a 1-1/8 inch length, accommodating panels up to 13/16 inch thick. It comes complete with three cams and two reversible rotation washers, allowing for multiple installation configurations to suit different cabinet and drawer styles. Installation is quick and straightforward using basic tools, making it an easy DIY upgrade for added security. Each set includes two keys (keyed different), a trim collar, cams, washers, and mounting hardware for a complete solution. Be sure to review the line drawing to ensure proper fit before purchasing.

These are 5 mm. pin, clear plastic locking shelf pegs. Constructed from mold injected clear plastic. They feature self-locking tabs to prevent tilt-up on 5/8 thick shelves and keeping them secure in place. The pegs fit into 5 mm. holes in bookshelves or cabinets in your home or office. Each package contains 4 shelf support pegs. To install simply push the pin in the hole and gently place the 5/8 in. shelf in the locking area, to remove press the locking piece of plastic in to lift your shelf up.

These roller assemblies are constructed of steel brackets and plastic wheels and they’re manufactured in a left and right-hand roller assembly. The roller assemblies are used to replace worn or missing guide buttons, allowing the drawers to glide easily when opening and closing, while at the same time preventing wear on the cabinet’s face frame or drawer opening. These roller assemblies install into the inside lower left and right corners of the drawer face opening with necessary fasteners provided within each kit. This pair of roller assemblies have a max load rating of 20 lbs., and they are used by many to replace missing or malfunctioning drawer track hardware. For a complete kit with track, guide and backplate, see Prime-Line part R 7137.

Whether you’re fixing your new dresser drawer that keeps getting stuck or restoring a beautiful vintage hutch, these Prime-Line R 7085 Drawer Track Guide and Glides are must-have. These furniture replacement parts can be used on a variety of furniture drawer systems, including dressers, hutches and nightstand drawers. They’re quick and easy to install and can save a broken drawer. Made of green plastic, these drawer track guides are designed to fit tracks. When your favorite dresser or furniture has a broken drawer, don’t toss it, fix it! With quick and easy installation and an inexpensive price tag, you’ll be thrilled with the results. Each kit includes 2 green plastic track case guides, 4 white plastic corner glides (saddles), 8 ring shank nails for nailing in corner glides (3/4 inch x 14-1/2 gauge), and 8 Phillips drive, pan head screws for installation of guides (#6 x 5/8 inch). Designed to fit tracks 9/32 inch x 1-1/8 inch. Please note, a metal track is required with these guides, but is not included.