Keyless Door Hardware

This bottom track is constructed from roll-formed steel and comes finished in champagne gold. The track can be used for new installs, or to replace missing or damaged bottom tracks of by-passing mirror doors that use convex edge mirror door roller assemblies. They feature a double-grooved track as used by a variety of mirror door manufacturers, and can easily be cut for custom installs. These replacement tracks are sold individually and the installation fasteners are not included.

It was the correct size and fit beautifully. Wheel’s on the closet door slide beautifully on the track Price was great and I love Wayfair Thank you. Carol. Thu May 15 2025

The expansive portfolio has many unique, patented solutions designed to address real-life problems. Most of the products are manufactured in the USA to the highest quality standards while maintaining competitive prices. With four convenient distribution points across the U.S., you can get your products quickly.

The folding door keyless lock can be used for added privacy. The hook style lock can be used for a single door application or a double door application and can be installed on either side of the door opening. Accessible only from the side installed on and can be installed at any height desired.

Easy to install directions makes this folding door lock latch a breeze to install. Michael Fitchett. Vancouver. Sun Jul 27 2025

These vintage style door knobs are constructed of steel and come in a beautiful finish. This set of knobs is designed for indoor use only, and it includes one 2-3/4 inch steel spindle, and one 3-5/8 inch steel spindle with 3/8 inch-20 threads. This colonial style knob set fits 1/4 inch square drive spindle systems commonly found in antique and vintage door hardware sets, and with the two (2) provided square spindles, it can adjust to accommodate doors of different thicknesses. These knobs feature a wrought steel Colonial design, and they have a 2-1/4 inch outside diameter with a rope embossed design on their face. The knob shanks include setscrews for securing the knobs to the square spindle. All other components of matching vintage design must be purchased separately, to include the internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. Note: This item cannot be used on pre-bored doors that have large, newer style doorknob holes without first plugging them to receive this hardware. Installation tip: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 inch (approximate size) knob holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing.

We have 100-year-old home and finding decent quality new door hardware is difficult, this was a good fit for our front door!. Kathleen. Hendersonville Nc, NC. Sat May 23 2026

This pull handle is constructed from wood. It features chrome plated diecast brackets with mounting holes that are 6-3/8 in. on center. Used on most flush type locks.

This patio door handle set comes with an inside handle with a hardwood pull and white diecast body. It is non-handed and can be used on right or left-handed doors. It is used by many patio door manufacturers.

Anonymous. Sun May 17 2026

This operator cover is constructed from diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the truth entrygard operator.

These 3/8 inch by 1/2 inch plastic screen frame corners are designed for repairing or constructing aluminum window screen panels using square cut frame ends. They fit standard 3/8 x 1/2 inch aluminum screen frame material and slide securely into the open ends of the frame to create a strong ninety degree corner. The square cut design eliminates the need for miter cutting, making screen repair and replacement simpler and more accessible for homeowners and DIY users across the United States. Made from durable black molded plastic, these screen frame corners provide a lightweight and cost effective solution for replacing broken or brittle corners on existing window screens or for building new screens from raw frame stock. The exposed corner design allows a portion of the corner to extend beyond the frame end, which is typical for square cut screen assemblies and helps maintain proper frame alignment. Installation is quick and does not require tools, fasteners, or adhesives, making it ideal for routine maintenance, seasonal screen repairs, rental property upkeep, or large home projects. Each package includes 20 screen frame corners to support multiple repairs or full screen builds, offering excellent value for homeowners and professionals alike. These corners are intended for standard residential window screen applications and are commonly used in houses, apartments, and multi unit dwellings. Always compare your existing aluminum screen frame dimensions to the line drawing before purchasing to ensure proper fit and compatibility.

Anonymous. Thu Apr 18 2024

This is a maximum security combo strike that fits 5-1/2 in. and 6 in. hole spacing's on center dead latch and deadbolt. Uses six 3 in. screws that install on the vertical side of the strike closest to the stop molding. These 3 in. screws allow for a strong hold as they drive into the jack stud to help prevent kick-ins. Three #8 x 3/4 in. screws install on the side of the strike closest to the door.

This Prime-Line H 3949 Right-Hand Casement Operator features a guide button that easily glides through the track. This casement window handle is used by a variety of wood and vinyl window manufacturers. Designed for right-handed casement windows. It is right-handed as viewed from the inside looking out. The body of the window handle crank is constructed of bronze diecast, with a steel arm and worm gear. The arm of the casement window crank handle replacement measures 13-1/2 inch from the middle of the guide button to the middle of the crank operator while closed. For further dimensional information, please see the line drawing (not universal).

This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

These are white plastic pull tabs. They have a 1/4 inch span x 15/16 inch width x 1-1/16 inch height. Designed to install in the channel and aid in removal of window screen. Installed under the screen spline in the channel

These 15/32 inch by 1-1/16 inch plastic screen frame corners are designed for repairing or constructing aluminum window screen panels using square cut frame ends. They fit standard 15/32 x 1-1/16 inch aluminum screen frame material and slide securely into the open ends of the frame to create a strong ninety degree corner. The square cut design eliminates the need for miter cutting, making screen repair and replacement simpler and more accessible for homeowners and DIY users across the United States. Made from durable champagne molded plastic, these screen frame corners provide a lightweight and cost effective solution for replacing broken or brittle corners on existing window screens or for building new screens from raw frame stock. The exposed corner design allows a portion of the corner to extend beyond the frame end, which is typical for square cut screen assemblies and helps maintain proper frame alignment. Installation is quick and does not require tools, fasteners, or adhesives, making it ideal for routine maintenance, seasonal screen repairs, rental property upkeep, or large home projects. Each package includes 20 screen frame corners to support multiple repairs or full screen builds, offering excellent value for homeowners and professionals alike. These corners are intended for standard residential window screen applications and are commonly used in houses, apartments, and multi unit dwellings. Always compare your existing aluminum screen frame dimensions to the line drawing before purchasing to ensure proper fit and compatibility.

Perfect for our door. We did have to order more than we needed, but it was what we were looking for.. Barbara. Georgetown, TX. Mon Mar 31 2025

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

Beautiful. Would be better if all the screws were long. You get 2-1” screws and 1- 3”screw. It’s also a little pricey compared to the black and silver. It would be nice if they’d make a satin gold instead of the shiner old fashion gold.. Angela. Fort Worth, TX. Thu Jan 12 2023

These vintage style door levers are constructed of diecast and come in a beautiful finish. They feature a heavy weighted casting design and unique Silencer bushings for smooth operation. This set of levers is designed for indoor use only, and it includes one 2-3/4 inch steel spindle, and one 3-5/8 inch steel spindle with 3/8 inch-20 threads. These French style levers fit 1/4 inch square drive spindle systems commonly found in antique and vintage door hardware sets, and with the two (2) provided square spindles, it can adjust to accommodate doors of different thicknesses. The lever shanks include setscrews for fastening to the square spindles. All other components of matching vintage design must be purchased separately to include the internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. Note: These levers cannot be used on pre-bored doors that have large, newer style doorknob holes without first prepping them to receive this older-style hardware. Installation tip: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 inch (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing.

Just wish it was for exterior use…..needed a handle with a short spindle….using it for interior handle of storm door….works great!. Will. Savannah, GA. Tue Jul 09 2024

This stylish patio door handle set comes with matching inside and outside pulls with centered latch lever. They are reversible for left or right-handed doors and diecast powder coated white. A variety of sliding patio door manufacturers used this handle. This particular model operates the Prime-Line mortise latches E 2008, E 2009, E 2014 or E 2111, if you cannot find online an in-store associate can special order. To make a locking handle use Prime-Line part E 2145, or replace the outside handle with Prime-Line part C 1120.

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

This white finish patio door handle is a surface with a hook latch style. Often found on older style patio doors, it is mounted on the door's inside the frame and the hook latch engages the keeper mounted on the jamb. It has a 7/8 in. low handle height. It is a white extruded aluminum inside handle with an anti-lift feature on the hook latch. The hook latch has a 7/16 in. profile. Mounting holes are 4-15/16 in. on center. It can be keyed by installing Prime-Line part E 2071.

These are aluminum charcoal/black finish patches used for easy repair of holes and tears in existing aluminum-mesh screens. Simply remove horizontal wires from bent edges, then fit ends into screen until patch is flush over hole, finish by folding ends down flat. For use on window and door screens, no tools required.

This Avian Melody Copper Plated Door Knocker, which is made from brass plated with copper for a beautiful, antique look. A proud bird stands atop this knocker, which is both handy and decorative.

Love this door knocker. It is nice and heavy and looks great on my front door.. Patricia. Rochester, NH. Mon Jun 10 2019

The concealed magnetic catch is a super-strong magnetic disc that will hold your door shut without the need for latches. Perfect for difficult to replace latches, pull handle entry doors, and custom applications.

Love this - very easy to install and made the door open and close with great ease and less noise. Chris. Tacoma, WA. Fri Mar 13 2026

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

Great alarm! Loud and easy to install.. Lacrecia. Charleston, WV. Tue Mar 05 2024

Add an extra layer of security to your home with this Defender Security Door Reinforcement Lock. Designed to withstand 800 lbs. of force, you can rest easy knowing your family is safe and protected! This reinforcement lock has a spring-loaded design, aluminum construction and a bronze anodized finish. This reinforcement lock can be quickly and easily installed on any swing-in door of any thickness, and can help ensure the door cannot be opened from the outside by being kicked inch Additionally, it’s tamper-resistant, so it can protect against lock picking and bumping. Plus, it’s child-safe, because you can install it higher on a door, where your young ones can’t reach. Length is 2 to 0.19 inch. Width is 1 to 0.38 inch. Installation takes minutes, and this door reinforcement lock comes with 3 inch hardened screws. Extra home security and peace of mind are well within reach, and doesn’t have to come with the high price tag of an alarm system! Be sure to view the manufacturer’s How-To Installation Video also linked to this page, in the upper left-hand corner.

I'm happy I bought this. Additional security and stylish.. Veronica. Fort Worth, TX. Sat May 23 2026

Artesano Iron Works Hammered Plate & Twisted Forged Iron Door Pull Plate is a piece of handmade exclusive Wrought Iron door hardware with a natural, oxidized, or black iron appearance that is full of character. This 12" L Door Hardware is the perfect choice for dressing your door and inspiring a traditional/Classic Style. A perfect piece for your desired ambient and a unique enhancement to your decoration.

Beautiful addition to my chicken coop! It has been outside for almost 2 years now and not a spot of rust has been found so far. Anonymous. Fri Jun 26 2026

For use in a 150 yo house bath -- this gadget is perfect!. Sharon. Alexandria, VA. Sat Jul 31 2021

This is a multi-point lock and keeper for vinyl patio doors that is yellow zinc plated designed for mortised installation with a round faceplate and 45 degree keyway. Mounting holes are 9-7/8 in. on center with hook to hook engagement spacing of 5-5/8 in., with a 9/16 in. thick body. Quick and easy mortise style installation. On the face of the lock there are 2 adjusting screws to allow you to adjust each hook lock separately if different depths are needed for the hooks.

Anonymous. Wed Jul 08 2026

Diana. US. Fri Aug 16 2024

This is a sliding window roller assembly with a plastic housing and flat edged tandem brass rollers. It features brass axles with a low profile housing and a snap-in design.

This is a door edge filler plate. Mortise hole cover is has a brass plated heavy-gauge steel design. It is used to cover the mortise hole on the edge of your doors. The plate measures 1 in. x 2-1/4 in. and should be used on appropriate sized holes.

This non-handed diecast zinc corner key comes with a one-way spring clip. It is used to repair and/or replace damaged or broken corner keys found in storm window frame assemblies using triple track systems.

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

There's an aura of mighty majesty accompanying the design of this Elephant Arrival Brass Door Knocker.

Beautiful door knocker. I use it as a wall decoration wrapping greenery around.. Lynette. FL. Wed Nov 27 2019

This Bi-Fold Door top or bottom pivot bracket by Prime-Line Products is constructed from stamped steel and it comes in a corrosion-resistant, zinc-plated finish. The bracket easily mounts into the top or bottom bi-fold door track, and it used by many manufacturers. These pivot brackets are easy to install with a few simple tools. It fits into a top or bottom track and helps to reduce binding at the pivot. Used on metal bi-folding doors.

This operator cover is constructed from diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the truth entrygard operator.

This latch is for use on your out-swinging wood or metal screen or storm doors. It features a contemporary design with a tie-down screw at bottom of the handle and comes complete with a night lock. For use on doors that are 1 in. to 1-1/4 in. thick.

There's an aura of majesty and elegance accompanying the design of this Horse Arrival Brass Door Knocker.

This door knocker is BEAUTIFUL!! It arrived quickly and it was packaged very well and upon opening it, everything looked perfect! It’s weighty and well made! It’s on our front door and I love it!! Reminds me of my pony who sadly passed away in September. I will think of her every time I see it and it brings me peace. So happy with my purchase!. Becka. Berryville, VA. Mon Jan 16 2023

These Prime-Line Products deadbolt strikes are constructed of heavy gauge stamped steel and come in optional plated finishes. These heavy duty deadbolt strikes replace most others and they increase the security with the 3-inch screws included within each pack. Use of long fasteners allow the deadbolt strike plate to fasten deep into the wall stud beneath the thin 3/4 inch door jamb. The plate can be used with most entry door applications. These strike plates are easy to install and they are used by many.

This is a heavy-duty pneumatic storm door closer for heavy weight wood or aluminum outswinging doors. It has a 1-1/2 in. barrel that is 10-3/8 in. long in a white finish. It comes complete with mounting brackets and attaching hardware. It has adjustable closing speed.

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

This decorative door knocker and viewer is constructed of diecast materials and comes in a satin nickel finish. Its vintage design extends a total of 4 inch tall and features a 160 degree angle of view. This door knocker and viewer can be installed on doors from 1-3/8 inch thick to 1-3/4 inch thick, with a required 1/2 inch inside diameter hole for installation of viewer. The integrated door viewer within this door knocker is designed to help keep you safe when answering your door and is ideal for day or night viewing with adequate exterior lighting. This door knocker and viewer is easy to install and it is used by many. See Prime-Line part S 4793 for a door viewer inside cover. Inside viewer covers (not included with this item) prevent reversed visibility through door viewers from the exterior of the home, increasing the security and privacy of your home.

Great item, came as it is described. Dawn. Malverne, NY. Fri Apr 29 2022

This dual pull lever operator is constructed from die-cast and comes finished in bronze. A variety of manufacturers use this on their awning windows. This type of pull lever operator holds window open in any of five positions.

Used to counter-weight the moving sash on single and double-hung windows. Fits window styles that tilt in for cleaning. Conveniently has the Prime-Line part FS 341 pre-installed.

This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

The plate was nice but I guess it got banded from the shipping guys.. Arsen. US. Sun Nov 23 2025