Brixwell Door Hardware

This commercial door closer features a hydraulic mechanism with adjustable latch and closing speed for controlled operation. Made from metal with a bronze finish, it has a height of 1-3/4", Vertical Hole Spacing of 3/4", Horizontal Hole Spacing of 9-1/16", and total length of 9-13/16", it supports both left- and right-hand doors. Rated size 4, it is compatible with commercial and industrial doors where consistent closing performance is needed.

I have not used my screws yet, but purchased them in-case i need to. Just right size for the job. Not knowing if you can purchase them anywhere, its great to have them as replacements. I will use mine as needed and It's nice to know I have them.. Margaret. Honeoye Falls, NY. Tue Oct 14 2025

Back-To-Back Tubular Pull Handles Without Metal Washers 1/4" To 1/2" Glass Thickness 6" Center-To-Center Polished Brass Finish are designed for glass door applications where back-to-back operation and direct glass mounting are required, such as shower enclosures and interior glass doors. The pull handles are manufactured from brass and feature a tubular construction with a 3/4" Diameter and a Tube Thickness of 1.5mil, providing defined grip spacing and consistent shape across the handle length. The mounting configuration is Glass Mount Back To Back and is intended for use with Monolithic Tempered Glass panels. The handle assembly supports Glass Thickness from 1/4" to 1/2" and installs without metal style washers, allowing direct alignment at the glass surface. Handle positioning is based on a fixed 6" Center-To-Center, supporting accurate alignment during installation or replacement. Installation requires a Hole Diameter of 1/2" and uses a 1/4"-20 Thread Size fastening system to secure both handles through the glass panel. The design provides a measured Projection From Surface of 2-1/2", allowing defined hand clearance while maintaining a compact profile on the glass door. Plastic Washers For Glass Protection are included to reduce direct contact between metal components and glass during mounting. The Polished Brass Finish provides a bright surface appearance that blends with coordinated glass door hardware. Installation Instructions- 1) Mark the 6" Center-To-Center on the glass panel and confirm glazing thickness compatibility. 2) Drill 1/2" diameter holes through the monolithic tempered glass. 3) Place the plastic washers on both sides of the glass at each mounting point. 4) Align the pull handles on opposite sides of the glass panel in a back-to-back position. 5) Insert the 1/4"-20 threaded fasteners and tighten evenly to secure the handles without overtightening.

This patio door handle set is made of aluminum with a White finish and fits doors with 4-15/16" hole centers. Its universal handing makes it suitable for residential sliding doors. It has a projection height of 1-31/32", projection depth of 23/32", and a 3/16" faceplate projection. Designed as a door handle without plate or cover, it provides a clean look for your patio or outdoor setup. All necessary mounting hardware is included, making this plate-free patio handle easy to install and ready for everyday use.

This white window grille kit is designed to enhance the appearance, privacy, and security of residential windows and doors. Suitable for use on wood, vinyl, or aluminum frames, the kit provides a decorative solution that supports restoration of vintage or traditional window styles. The grille design helps partially obscure outside visibility while contributing an added layer of deterrence at the window opening. The set includes 12 pieces of 24" profile, 8 X connectors, and 16 fasteners, providing sufficient material for a standard size window or door configuration. The components are engineered for straightforward installation and can be removed when needed for cleaning or maintenance. The white finish offers a clean appearance compatible with a variety of architectural styles. This kit is intended for decorative and supplemental security applications where a structured grille pattern is desired. It is suitable for residential upgrade or restoration projects requiring a removable window grille assembly.

Easy to install on all of my windows.. Beth. OH. Sat Jul 25 2026

This Round tubing mitered corner back to back pull handle designed for glass door applications where stable grip and consistent hand positioning are required. The handle is manufactured from brass using tubular construction and combines round tubing with squared mitered corners. This contrast creates a defined profile while maintaining uniform contact during door operation. The matte black finish provides a low gloss surface with reduced reflections. The handle installs using a glass mount back to back configuration and is intended for monolithic tempered glass only. It supports glazing thickness from 1/4" to 1/2" and requires a 1/2" mounting hole for proper installation. The 8" center to center spacing allows accurate alignment on glass panels and balanced mounting geometry. The overall handle length measures 9-1/4", defining the total grip span across the glass surface. A 3/4" tubing diameter provides controlled hand contact and a stable gripping surface. The 2-1/2" projection from the glass surface allows finger clearance during slide, fold, swing side, and floor pivot door movement. Style washers with a 1-1/4" diameter support the mounting interface. Plastic washers and nylon spacers are included to reduce glass to metal contact and assist with spacing during installation. Corner enclosure fits two intersecting walls, niche enclosure installs between three walls, and tailor-made solutions are custom built to suit specific site dimensions and layout requirements. The handle is suitable for interior glass doors where consistent alignment and controlled operation are required. The full rotation swing supports flexible enclosure layouts including corner, niche, and tailor made solutions. Care: Wipe dry after use. Clean weekly with mild soap and warm water using a soft cloth. Do not use abrasive cleaners or scrubbing tools.

Zinc construction offers a solid, lightweight solution for storm or screen door latches.

Item I received does not match the handle on the site.. Neil. Kansas City, MO. Fri Jul 24 2026

This No drill fixed panel glass clamp is designed to secure fixed glass panels without drilling holes or cutting notches in the glass. It is made from brass material and features a oil rubbed bronze finish suitable for wall mount installations. This clamp supports glazing thickness from 5/16" to 3/8" and is intended only for fixed panel applications. The overall length is 2-3/8", width is 1-3/16", depth is 3/4", and wall thickness is 1/8". Center to center spacing measures 1-3/8", with an inner depth of 15/32". The edge to mounting holes distance at both top and bottom is 9/16". Installation does not require glass fabrication, as two nylon tipped set screws tighten against the glass surface to hold it in position. Clear gaskets are included to create a protective buffer between the glass and clamp. Mounting screws are also included for securing the clamp to wall, ceiling, or floor surfaces. Use monolithic tempered glass. Important note: Do not hinge a door off a fixed panel using these clamps. Clamps must be installed on a minimum of three sides of the fixed panel, including top, bottom, and at least one side. Silicone must be applied along the entire glass edge where clamps are used. The installer must verify adequate structural backing support before installation. Care: Wipe dry after use. Clean weekly with mild soap and warm water using a soft cloth. Do not use abrasive cleaners or scrubbing tools.