Keyless Door Hardware

Prime-Line MP1583 Sliding Door Repair Track is designed to restore smooth operation to worn or damaged sliding track systems on aluminum doors. This replacement door track cap slips over existing damaged tracks, providing a simple and effective solution to prolong the life of your sliding door. Built to last, the patio track is made of high-quality stainless steel for maximum durability and rust resistance, ensuring long-term performance. Simply prep the existing door tracks, apply a thin bead of silicone glue, and snap the repair track into place using a rubber mallet and block of wood for a secure fit. Each replacement sliding track measures 3/16 inch x 72 inch x 1/4 inch and comes in a convenient 2-pack. For further dimensional information, please see the line drawing before purchasing.

Anonymous. Mon Nov 03 2025

This Prime-Line Adjustable Sliding Door Lock features a telescopic design that allows it to adjust to fit nearly all standard patio door openings. The lock bar is adjustable to accommodate openings from 28 inch to 48 inch Secure your door in an open position, so you can safely allow fresh air into your home. When not in use, simply swing the metal security bar up and out of the way. Unlike typical patio door patio door lock bar, this door lock stick does not require you to cut the unit down to size with a saw. You simply press in the tension release clip to extend the length or reduce the length. Constructed of aluminum with an aluminum finish, the patio safety bar prevents doors from being forced open. Please refer to the line art drawing for dimensions and compare to your needs before purchasing.

Perfect for securing my sliding glass door. Glad I found it.. Carolyn. Louisville, KY. Sat Feb 21 2026

This bottom track is constructed from roll-formed steel and comes finished in champagne gold. The track can be used for new installs, or to replace missing or damaged bottom tracks of by-passing mirror doors that use convex edge mirror door roller assemblies. They feature a double-grooved track as used by a variety of mirror door manufacturers, and can easily be cut for custom installs. These replacement tracks are sold individually and the installation fasteners are not included.

It was the correct size and fit beautifully. Wheel’s on the closet door slide beautifully on the track Price was great and I love Wayfair Thank you. Carol. Thu May 15 2025

The expansive portfolio has many unique, patented solutions designed to address real-life problems. Most of the products are manufactured in the USA to the highest quality standards while maintaining competitive prices. With four convenient distribution points across the U.S., you can get your products quickly.

This is a set of handles of closet sliding door. It is 11 3/4" long,1/2" width and 1 3/8" depth (each handle).

A little light weight, but perfect on the hall laundry closet doors. I like the clean lines.. Cyndi. Thu Sep 18 2025

Enhance the appearance and functionality of commercial, institutional, and residential doors with the Prime-Line Door Pull Plate with Handle. Designed for push-pull door applications, this combination pull plate and handle helps protect door surfaces from wear while providing a convenient gripping point for opening and closing doors. Commonly used on commercial storefronts, office buildings, schools, and public facilities, it delivers both durability and professional appearance. Constructed from solid brass, this pull plate is built for long-lasting performance in high-traffic environments. The finish provides a bright, attractive appearance that complements a wide variety of architectural and decorative hardware finishes. The integrated oval handle offers a comfortable grip while the large plate helps protect the door surface from fingerprints, scratches, and everyday wear. Measuring 4 in. x 16 in., this pull plate is sized for a variety of commercial door applications and meets ANSI specifications. Six mounting holes provide secure attachment, and matching fasteners are included for convenient installation. Whether replacing worn hardware or upgrading an existing door, this pull plate with handle provides a durable and attractive solution.

Robert. Greensboro, NC. Sat Jul 01 2023

The folding door keyless lock can be used for added privacy. The hook style lock can be used for a single door application or a double door application and can be installed on either side of the door opening. Accessible only from the side installed on and can be installed at any height desired.

Easy to install directions makes this folding door lock latch a breeze to install. Michael Fitchett. Vancouver. Sun Jul 27 2025

This pull handle is constructed from wood. It features chrome plated diecast brackets with mounting holes that are 6-3/8 in. on center. Used on most flush type locks.

"Protect your doors from scuffs, scratches, dents, and everyday wear with the Prime-Line MP4704 Solid Brass Kick Plate. Designed for installation on swinging doors, this durable door protector helps preserve the appearance of entry, storm, and interior doors in residential, commercial, and multi-family applications. It helps shield the lower portion of the door from damage caused by foot traffic, carts, equipment, pets, and daily use while adding a decorative brass accent. Constructed from solid brass with a polished brass finish, this kick plate delivers long-lasting durability and a classic appearance that complements traditional and decorative door hardware. Measuring 6 inches high by 34 inches wide, it is designed to fit many standard 36-inch doors and provides protection to the portion of the door most vulnerable to scuffs and impact damage. The polished brass finish enhances curb appeal while maintaining a clean, professional look. A removable PVC protective coating helps safeguard the finish during shipping and installation. Pre-punched mounting holes and included fasteners allow for quick, straightforward installation. Whether replacing an existing kick plate or adding protection to a new door, this low-maintenance solution helps extend door life and reduce repair costs. Review the dimensional drawing and compare measurements with your application before purchasing to ensure proper fit and coverage."

Arrived folded over, leaving big crinkled up section that I can't seem to get out. Made really poorly. Don't order this product.. Cathy. Louisville, KY. Thu Jul 23 2026

This sliding window lock is constructed of diecast and comes in a white painted finish. This lock is DESIGNED FOR USE ON HORIZONTAL VINYL SLIDING WINDOWS, yet it may also work with some vertical sliding (single hung) windows, depending upon the type of vinyl liners and balances used to construct the windows. Note: These locks will fit most all horizontal vinyl sliding windows and some vertical sliding windows, but not all of them. These locks feature an adjustable jaw that has a vise-like grip, and they are capable of opening up to 1/2 in. wide for a secure, non-marring hold on thick vinyl rails. When installing this lock, the cam style locking lever should be rotated hand-tight over the rail or vinyl edge to a sufficient torque prior to locking down the lever. Can be adjusted to fit on rail thicknesses ranging from 1/16 in. to 1/2 in. thick. Used as a secondary lock when window is shut and to secure the windows during ventilation. For a larger version of this lock (used on vinyl frame patio sliding doors) see Prime-Line part U 10547. No tools are required for installation.

Omar. CA. Sat Aug 15 2026

These are white plastic pull tabs. They have a 1/4 inch span x 15/16 inch width x 1-1/16 inch height. Designed to install in the channel and aid in removal of window screen. Installed under the screen spline in the channel

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

Beautiful. Would be better if all the screws were long. You get 2-1” screws and 1- 3”screw. It’s also a little pricey compared to the black and silver. It would be nice if they’d make a satin gold instead of the shiner old fashion gold.. Angela. Fort Worth, TX. Thu Jan 12 2023

These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a retaining ring to add strength at the insertion point when the lock is engaged. These patio door pin locks are designed to secure the sliding door in place when in a closed or ventilating position. These lock pins include all installation fasteners and they are simple to install.

Protect your door from scuffs and impact with this 6 in. x 36 in. Stainless Steel Door Kick Plate. Crafted from 22-gauge type 430 stainless steel with a #3 brushed finish, it combines durability with a clean, professional appearance that complements any commercial or residential setting. The plate features 8 pre-drilled holes and comes with self-tapping screws for quick and secure installation. Each unit is individually packaged with 10mm pearl wool on the top and bottom for added protection. Sold as 1 piece per carton, with 20 pieces per master carton, this kick plate is a reliable solution for high-traffic environments.

This Prime-Line H 3949 Right-Hand Casement Operator features a guide button that easily glides through the track. This casement window handle is used by a variety of wood and vinyl window manufacturers. Designed for right-handed casement windows. It is right-handed as viewed from the inside looking out. The body of the window handle crank is constructed of bronze diecast, with a steel arm and worm gear. The arm of the casement window crank handle replacement measures 13-1/2 inch from the middle of the guide button to the middle of the crank operator while closed. For further dimensional information, please see the line drawing (not universal).

This patio door handle set is a multi-point lockset that comes with a white left-handed inside handle and an upper body thumb turn. The inside handle mounts onto a mounting bracket that is installed onto the door. The outside handle is a white diecast pull that can be keyed with the Prime-Line part E 2000 cylinder. This set is often used on vinyl or wood patio doors. The set comes with a unique keeper and multi-point lock.

These are double wing clips are constructed of plastic and come in an off white finish. They are used to attach screens and storm windows to window openings, and for use on to narrow rails to hold adjacent screens in place. Each clip mounts with one fastener, also provided in package.

Protect doors from scuffs, scratches, dents, and everyday wear with the Prime-Line MP4616J Kick Plate. Designed for installation on swinging doors, this durable door protector helps preserve the appearance of entry, storm, and interior doors in residential, commercial, and multi-family properties. It helps shield the lower portion of the door from damage caused by foot traffic, carts, equipment, pets, and daily use while maintaining a clean, professional appearance. Constructed from solid aluminum with a satin finish, this kick plate provides long-lasting durability and corrosion resistance while complementing a wide variety of door styles and hardware finishes. Measuring 8 inches high by 34 inches wide, it is designed to fit many standard 36-inch doors and provides broad protection where doors are most susceptible to impact and scuffing. A removable PVC protective coating helps guard the finish during shipping, handling, and installation. Installation is quick and easy with the pre-punched mounting holes and included fasteners. Whether replacing a damaged kick plate or adding protection to a new door, this low-maintenance solution helps extend door life and reduce maintenance costs. Custom sizes may be available through special order from the manufacturer. Review dimensions and compare them with your door before ordering to ensure proper fit and coverage.

Lisa. Louisville, KY. Mon Sep 14 2026

This Bi-Fold Door top or bottom pivot bracket by Prime-Line Products is constructed from stamped steel and it comes in a corrosion-resistant, zinc-plated finish. The bracket easily mounts into the top or bottom bi-fold door track, and it used by many manufacturers. These pivot brackets are easy to install with a few simple tools. It fits into a top or bottom track and helps to reduce binding at the pivot. Used on metal bi-folding doors.

This is a multi-point lock and keeper for vinyl patio doors that is yellow zinc plated designed for mortised installation with a round faceplate and 45 degree keyway. Mounting holes are 9-7/8 in. on center with hook to hook engagement spacing of 5-5/8 in., with a 9/16 in. thick body. Quick and easy mortise style installation. On the face of the lock there are 2 adjusting screws to allow you to adjust each hook lock separately if different depths are needed for the hooks.

Anonymous. Wed Jul 08 2026

These are aluminum charcoal/black finish patches used for easy repair of holes and tears in existing aluminum-mesh screens. Simply remove horizontal wires from bent edges, then fit ends into screen until patch is flush over hole, finish by folding ends down flat. For use on window and door screens, no tools required.

This operator cover is constructed from diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the truth entrygard operator.

This 1-1/2 inch C-tab tandem roller assembly is designed for Pacific, Elco, and a variety of other sliding patio doors. It features 1-1/8 inch concave stainless steel ball bearing rollers in an adjustable stamped stainless steel housing for smooth, quiet operation. The C-tab fits around the corner screw and is captured by the side stile and bottom rail as they are drawn together, ensuring a secure installation. The housing measures 11/16 inch wide with a 13/16 inch flare, 1-1/16 inch tall, and 3-1/8 inch long. Rear adjustment allows precise alignment, and mounting hardware is included. A Phillips head screwdriver is required for installation.

For use in a 150 yo house bath -- this gadget is perfect!. Sharon. Alexandria, VA. Sat Jul 31 2021

Protect your door from scuffs and impact with this 6 in. x 28 in. Stainless Steel Door Kick Plate. Crafted from 22-gauge type 430 stainless steel with a #3 brushed finish, it combines durability with a clean, professional appearance that complements any commercial or residential setting. The plate features 8 pre-drilled holes and comes with self-tapping screws for quick and secure installation. Each unit is individually packaged with 10mm pearl wool on the top and bottom for added protection. Sold as 1 piece per carton, with 20 pieces per master carton, this kick plate is a reliable solution for high-traffic environments.

These patio door lock pins are constructed of steel and come in a chrome plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on chain for easy storage when not in use, and a retaining ring to add strength at insertion point when lock is engaged. These patio door pin locks are designed to secure the sliding door in place when in the closed or ventilating position. These lock pins include all installation fasteners and they are simple to install.

This is a sliding window roller assembly with a plastic housing and flat edged tandem brass rollers. It features brass axles with a low profile housing and a snap-in design.

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

This is a bronze finish left-handed, 9-1/2 in. single arm operator. It is made of heavy-duty diecast zinc with the baked on a bronze finish. The steel arm, worm drive and gears are protected with a corrosive resistant finish, and it opens to a full 90 degrees. The plastic roller on the end of the steel arm insure a smooth operation as it slides through the Prime-Line part TH 22397 track. When installing, the housing easily fastens down to the window sill.

This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

These 3/8 inch by 1/2 inch plastic screen frame corners are designed for repairing or constructing aluminum window screen panels using square cut frame ends. They fit standard 3/8 x 1/2 inch aluminum screen frame material and slide securely into the open ends of the frame to create a strong ninety degree corner. The square cut design eliminates the need for miter cutting, making screen repair and replacement simpler and more accessible for homeowners and DIY users across the United States. Made from durable black molded plastic, these screen frame corners provide a lightweight and cost effective solution for replacing broken or brittle corners on existing window screens or for building new screens from raw frame stock. The exposed corner design allows a portion of the corner to extend beyond the frame end, which is typical for square cut screen assemblies and helps maintain proper frame alignment. Installation is quick and does not require tools, fasteners, or adhesives, making it ideal for routine maintenance, seasonal screen repairs, rental property upkeep, or large home projects. Each package includes 20 screen frame corners to support multiple repairs or full screen builds, offering excellent value for homeowners and professionals alike. These corners are intended for standard residential window screen applications and are commonly used in houses, apartments, and multi unit dwellings. Always compare your existing aluminum screen frame dimensions to the line drawing before purchasing to ensure proper fit and compatibility.

Anonymous. Thu Apr 18 2024

Diana. US. Fri Aug 16 2024

This patio door handle set is a multi-point lock set that comes with a white right-handed inside handle and an upper body thumb turn. The inside handle mounts onto a mounting bracket that is installed onto the door. The outside handle is a white diecast pull that can be keyed with the Prime-Line part E 2000 cylinder. This set is often used on vinyl or wood patio doors. The set comes with a unique keeper and multi-point lock.

These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a retaining ring to add strength at the insertion point when the lock is engaged. These patio door pin locks are designed to secure the sliding door in place when in a closed or ventilating position. These lock pins include all installation fasteners and they are simple to install.

These 15/32 inch by 1-1/16 inch plastic screen frame corners are designed for repairing or constructing aluminum window screen panels using square cut frame ends. They fit standard 15/32 x 1-1/16 inch aluminum screen frame material and slide securely into the open ends of the frame to create a strong ninety degree corner. The square cut design eliminates the need for miter cutting, making screen repair and replacement simpler and more accessible for homeowners and DIY users across the United States. Made from durable champagne molded plastic, these screen frame corners provide a lightweight and cost effective solution for replacing broken or brittle corners on existing window screens or for building new screens from raw frame stock. The exposed corner design allows a portion of the corner to extend beyond the frame end, which is typical for square cut screen assemblies and helps maintain proper frame alignment. Installation is quick and does not require tools, fasteners, or adhesives, making it ideal for routine maintenance, seasonal screen repairs, rental property upkeep, or large home projects. Each package includes 20 screen frame corners to support multiple repairs or full screen builds, offering excellent value for homeowners and professionals alike. These corners are intended for standard residential window screen applications and are commonly used in houses, apartments, and multi unit dwellings. Always compare your existing aluminum screen frame dimensions to the line drawing before purchasing to ensure proper fit and compatibility.

Perfect for our door. We did have to order more than we needed, but it was what we were looking for.. Barbara. Georgetown, TX. Mon Mar 31 2025

This Defender Security U 9509  Latch Guard Plate Cover helps protect swing-out doors from forced entry at the most vulnerable area of a door. The outward swinging door latch compatible with right or left swing-out doors. Made of heavy-duty steel with a gray -painted finish, this latch guard cover is strong and made to last, giving you extra security and peace of mind. Easily install this outward swinging door security cover in less than 30 minutes with a few simple tools. The outward swinging door set includes mounting hardware and installation instructions so you have everything you need to make your home more secure. The 6 inch cover features a 5/16 inch offset lip which is designed to cover the latch area of an out swinging hinged door. Fits around standard 2-3/8 inch residential backsets. For further dimensional information, please see the line drawing.

This latch is for use on your out-swinging wood or metal screen or storm doors. It features a contemporary design with a tie-down screw at bottom of the handle and comes complete with a night lock. For use on doors that are 1 in. to 1-1/4 in. thick.

This OEM screen door hardware kit is constructed of steel, diecast and plastic components, and it comes in a aluminum painted finish. The components of this kit can be used to replace damaged or missing hardware, or for the installation of a new screen door, or simply to upgrade existing hardware to a new color and finish. The kit comes complete with a medium-weight pneumatic door closer, and a push-button latch set with tie down. Kits like this one are designed for use on out-swinging doors constructed of wood or metal, measuring from 1 in. to 1-1/4 in. thick. This hardware can also be used on storm doors. The kit comes complete with a night lock security feature, and the closer has an adjustable closing-speed functionality. Using the installation instructions and fasteners, this kit is easy to install.

This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

This non-handed diecast zinc corner key comes with a one-way spring clip. It is used to repair and/or replace damaged or broken corner keys found in storm window frame assemblies using triple track systems.

Protect your doors from daily wear and tear with this 10 in. x 34 in. Stainless Steel Door Kick Plate. Made from durable 22-gauge type 430 stainless steel with a sleek #3 brushed finish, this kick plate adds both protection and a professional look to any commercial or residential doorway. Designed with 8 pre-drilled holes for easy installation, each plate includes self-tapping screws for fast and secure mounting. To ensure it arrives in perfect condition, each plate is individually packaged with 10mm pearl wool protection on the top and bottom sides. Sold as 1 piece per carton, with 20 pieces per master carton.

This is a single pull lever operator made of high pressure zinc. It features a steel-constructed base-plate, sash hook and lever arms. The operator housing is bronze finish and is rust and corrosion resistant.

I really enjoy the performance of this quality window opener. Easy to open and close, and very durable mechanism. Window an be opened and closed without removing window screen, and may be securely fastened in an open position-perfect for breezy conditions. It was easy to install, as we made our own window frames to fit this opener.. Canadian Shopper. Bc Canada. Tue Sep 09 2025

Used to counter-weight the moving sash on single and double-hung windows. Fits window styles that tilt in for cleaning. Conveniently has the Prime-Line part FS 341 pre-installed.

Restore the appearance and functionality of compatible casement and awning window operators with the Prime-Line TH 24086 EntryGard Nesting Operator Cover and Crank. Designed for Truth EntryGard window operators with 11/32 in. diameter, 12-spline spindles, this replacement cover and crank assembly provides smooth window operation while helping minimize interference with blinds, shades, shutters, and other window treatments. The nesting design allows the handle to fold neatly into the cover, creating a low-profile appearance when not in use. The crank handle is constructed from durable diecast zinc with a white enamel finish engineered to resist rust, corrosion, and everyday wear. The molded plastic operator cover conceals exposed operator hardware for a clean, finished appearance while providing a nesting pocket for the folding handle. A set screw at the base of the handle secures it firmly to the spindle, while the swivel knob offers comfortable operation and improved leverage when opening and closing windows. When unfolded, the crank extends outward to provide ample operating clearance, then folds and nests into the cover for a compact 1-3/4 in. profile. Ideal for replacement and repair projects, this cover and crank assembly helps improve window aesthetics while maintaining reliable performance. Review the line drawing and compare spindle dimensions and operator style with your existing hardware before purchasing to ensure compatibility.

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

This is a bronze casement operator that has been used on wood and vinyl windows for the last 35 years. It is left-handed as viewed from the inside looking out. The body is bronze diecast with a steel worm gear driving a 9-1/2 in. painted steel arm with a plastic guide button on the tip. The guide button glides through the track Prime-Line part H 3530. It contains one operator, 1 crank handle, and installation screws. For matching right-hand operator use Prime-Line part H 3569.

These 1/4 inch by 9/16 inch plastic screen frame corners are designed for repairing or constructing aluminum window screen panels using square cut frame ends. They fit standard 1/4 x 9/16 inch aluminum screen frame material and slide securely into the open ends of the frame to create a strong ninety degree corner. The square cut design eliminates the need for miter cutting, making screen repair and replacement simpler and more accessible for homeowners and DIY users across the United States. Made from durable white molded plastic, these screen frame corners provide a lightweight and cost effective solution for replacing broken or brittle corners on existing window screens or for building new screens from raw frame stock. The exposed corner design allows a portion of the corner to extend beyond the frame end, which is typical for square cut screen assemblies and helps maintain proper frame alignment. Installation is quick and does not require tools, fasteners, or adhesives, making it ideal for routine maintenance, seasonal screen repairs, rental property upkeep, or large home projects. Each package includes 20 screen frame corners to support multiple repairs or full screen builds, offering excellent value for homeowners and professionals alike. These corners are intended for standard residential window screen applications and are commonly used in houses, apartments, and multi unit dwellings. Always compare your existing aluminum screen frame dimensions to the line drawing before purchasing to ensure proper fit and compatibility.