Closet Door Finger Pull, 1-3/4 in., Antique Brass Finish (2 Pack) (Set of 2)

Features

• Prime-Line 1-3/4 in., Antique Brass Plated Bypass Door Pull Handle (2 Pack)
• This mortise cup closet door pull is constructed of stamped steel and comes finished in antique brass. The outside diameter of this pull is 1-3/4 inch and it has a depth of 5/16 inch. These mortise cups set flush in the door and are used on by-passing closet panel doors to provide a pull for ease of opening and closing, and it they are used by many manufacturers. This item includes 2 pulls and 4 nails per package. Installation tip: to avoid damaging the pulls during installation; use a pair of needle nose pliers to hold the nails while hammering, then finish driving the nails with a nail set to seat them in place. Silicone glue may be required if the hole has worn larger.
• REPLACE CLOSET DOOR PULL – Easily replace a damaged or missing closet door pull with Prime-Line’s round finger pull. The pull is constructed of stamped steel with an antique brass-plated finish.
• INCLUDES – Each package includes two sliding door pulls and four nails. Each pull is held in place by two nails.
• UNIVERSAL DESIGN – Used by many closet door manufacturers on bi-pass door systems, the finger pull will match the existing hardware on closets throughout your home.
• NOTE – Please refer to the line art drawing for dimensions and compare with your original item before purchasing (Not Universal)