Stainless Steel Lock and Door Reinforcement Plate for 1-3/4 In. Thick Doors, Stainless Steel Finish (Single Pack)

Features

• Prime-Line Lock and Door Reinforcement Plate for 1-3/4 In. Thick Doors, (Single Pack)
• Defender Security Lock and Door Reinforcer assists in preventing forced entry by reinforcing the weak spot of an entry door. It can be used to reinforce and repair both metal and wood doors. Made of solid brass construction, the lock reinforcer plate comes finished in stainless steel. All the necessary mounting hardware is included for a quick and easy installation. The lock reinforcement plate is pre-punched for mounting. The reinforcer is designed for 1-3/4 inch thick doors that have mortise or drive-in latches. It features one 2-1/8 inch bore with a 2-3/8 inch backset. The door reinforcer is recessed. Please refer to the line art drawing for dimensions and compare to your needs before purchasing (Not Universal).
• ADDED SECURITY – Prevent forced entry by reinforcing the weak spot of an entry door with the recessed door lock reinforcer; use to reinforce and repair both metal and wood doors
• NOTE – Make sure to dry fit the 4-5/16 inch wide by 4-1/2 inch tall with a 0.03 inch thickness door lock reinforcer before permanently installing
• Designed for single bore doors with a 2-3/8 in. backset
• BUILT TO LAST – Made of stainless steel, the door lock reinforcement plate comes in a natural finish to fit over a single bore hole on your door that has a damaged recessed latch area
• Helps protect against a forced entry
• EASY INSTALLATION – All the necessary mounting hardware is included with the lock reinforcement plate for a quick and easy installation; the door reinforcer plate is pre-punched for mounting then remove the protective film after installation
• For use on doors 1-3/8 in. thick that have mortise or drive-in latches
• DIMENSIONS – The door lock reinforcement plate is designed for 1-3/4 inch thick doors only that have a 2-1/8 inch bore hole through the door, with a 2-3/4 inch backset from the edge of the door to the center of the bore hole
• Stamped steel that comes in a in bright finish
• NOTE – Please refer to the line drawing for dimensions also compare the door’s thickness and the backset from the front of door’s edge to the center of doorknob’s location (Not Universal)
• Pre-punched for mounting
• Installation fasteners included
• For further dimensional information, please see the line drawing
• A Phillips head screwdriver is required for installation