Brushed Nickel Top Mount T-Shape Design Non-Bypass Single Track Two Door Hardware Kit (Door Not Included)

Features

• This kit only includes hardware, the door(s) are not included.
• Track 8ft and under is only one piece track. For the one piece bar, the spacing between two mounting holes is 16 inches. Track 9ft and above are connected by 2 or 3 tracks using a junction plate, so the spacing between the holes where the bars connect is not 16 inches, and a header board is needed.
• Premium brushed nickel steel, heavy-duty, total door(s) weight up to 220 lbs. High-quality nylon wheels ensure minimal noise.
• If you have a door trim, please put a header board that is as thick as the trim and then attach the rail to the header board.
• You need to have at least 6" of space between the top of the door to the ceiling to accommodate the hardware.
• Two hangers are used to hold one door. For a double-door kit, there will be four hangers in the package. If you have a door that is either too wide or too heavy, then you can purchase additional hangers for that door.
• For a T-shape roller design, the roller will be mounted on top of the door instead of mounting to the side of the door.