1 GAL Solvent Based High Gloss Acrylic Cure And Seal For Concrete

Features

• Will darken the surface to make it look wet, bringing out any dull and faded coloring.
• Meets ASTM 1315 and ASTM C 309 standards
• Protective surface film will reduce damage and deterioration caused by water absorption and surface abrasion.
• Protective surface film will reduce the growth of mold, mildew, and algae on the surface.
• Breathable, UV resistant, made in the USA. When properly applied, the Armor LV25 can provide up to 1-3 years of life on an exterior surface before the need to recoat, and up to 2-7 years of life on an interior surface.
• Coverage: Porous Surfaces: Up to 175 FT2/gallon in one coat.Smooth Surfaces (once properly prepped): Up to 200-225 FT2/gallon in one coat. Coverage will vary depending on porosity, surface condition, application method, and the amount of material applied by the applicator. The above coverage rates are estimates and will vary. Two coats are suggested for even coverage and appearance.
• Application: The Armor LV25 can be applied with a 3/8-1/2” nap roller, or an acetone/solvent-resistant HVLP sprayer with Viton seals. For a consistent wet look and high gloss finish, apply two coats spaced 24 hours apart. The product should be applied in the late afternoon/early evening when air and surface temperatures are declining. The product is designed specifically for unsealed concrete and pavers, or concrete and pavers previously sealed with a solvent-based acrylic.
• VOC Regulations: This product is 700 VOC and can be shipped to every state except AZ, CA, CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, NY, OH, PA, RI, UT, VA. If you live in a restricted state, please consider the Armor LV25 350 VOC.