1-1/2 in. Steel, Sliding Door Tandem Roller Assembly, for Rolleze Glass Doors (Single Pack)

Features

• Prime-Line 1-1/2 in. Steel, Sliding Door Tandem Roller Assembly, for Rolleze Glass Doors (Single Pack)
• This is a unique housing patio door roller assembly. It is 23/32 in. wide, 1-7/8 in. tall, and 2-1/8 in. long with a 1-1/4 in. diameter steel ball-bearing roller. To install, remove the screw from the back and insert the assembly into the bottom rail end. Replace side stile, insert the screw, and into the assembly. As the screw draws the roller's backside tighter, the design causes the front end to rotating downward and the door to lift to the desired height. Used by Rolleze or Rylock.
• Used by Rolleze Glass, Rylock, and a variety of sliding patio doors
• Insert the roller into the bottom rail without the screw, replace the side stile, as the screw draws the roller's bottom backside tighter, the design causes the far end to rotating downward causing the roller to lift the door to the desired height
• Galvanized stamped steel construction and steel roller
• A Phillips head screwdriver is required for installation