Roll into bed at night knowing everything you need is right at your fingertips with this low-profile spindle nightstand. An open cubby is the perfect perch for your nightly novels or trendy décor, while the single drawer can house your skincare must-haves, TV remotes, or contact case. Or, set this table couchside for a sleek storage addition to your living room or entertainment hub. Minimalist handles add to the subtle style while tapered legs lend a cool, mid-century look to ensure that your space has both form and function in mind.
So we were worried about pulling the trigger on these given the numerous bad ratings, but in the end I'd say we're happy with the purchase. Yes one box didn't include the cheap back plate that really isn't necessary, many dowels are loose in holes, there are no pilot holes drilled for many steps which makes installing the screws a tough job...but with care they both assembled fine. The instructions were clear enough to follow. My advice would be (1) push down hard with your Phillips screwdriver to make sure the screws start threading when there's no pilot hole, (2) use a hex wrench that's at least 4-inches long (as opposed to the fee zig-zag one they include) to install the legs as it greatly reduces the effort required (<30 seconds per leg), (3) and make sure to hold the metal posts (that the cams grab) nice and perpendicular when screwing into the holes and don't use a drill until you've got them reasonable threaded into the wood and (4) as one reviewer warned, use the lightest torque on your drill clutch if you choose to use a drill. Second assembly took just over an hour.. Brett. Long Beach, CA. Wed Dec 04 2024
