Aaleeya Abstract

Features

• STUNNING WALL TEXTURES - Ideal for use in bedrooms, living rooms, bonus rooms, hallways, foyers, entryways, ceilings, and more. Stone Ten designs blend beautifully with a variety of different styles and decors. The depth and detail of the 3D textures will help energize spaces that may be looking a little outdated or just lacking character.
• DIY INSTALLATION - Each Stone Ten Wall Panel is approximately 19.7" X 19.7". A 12 pack of 3D wall tile covers 32 square feet. For larger projects, Stone Ten offers a 72 PC value pack that provides 192 square feet of coverage. Stone Ten Wall Panels are light weight and easy to install. Construction adhesive must be used to adhere Stone Ten 3D Wall Panels to the wall. They can be trimmed to size to fit your area.
• ECO-FRIENDLY AND NOISE DIFFUSING - Stone Ten Decorative Wall Panels are made from a sustainable eco-friendly resource. Each Panel is created from a unique blend of bamboo fiber that is 100% recycled. Not only do Stone Ten wall texture make your room beautiful, they also act as a great noise diffuser. The angles on the 3D wall tiles help break up sound waves to minimize unwanted echo and noise reflection in a room.
• PAINT TO MATCH YOUR ROOM - STONE TEN 3D Wall Panels can be painted with traditional interior water based paints to match any space. STONE TEN 3D Wall Panels are also beautiful right out of the box in a contemporary, matte white finish. (FOR BEST RESULTS, FOLLOW DETAILED INSTALLATION INSTRUCTIONS IN DESCRIPTION AT BOTTOM OF PAGE)
• STONE TEN 3D Wall Panel Installation Instructions: Wall Surface Preparation: Repair any damaged surfaces on the wall where you plan to install the 3D Wall Panels and ensure that the wall is flat, clean, and dry. 3D Wall Panel Preparation: Allow the 3D Wall Panels to adapt to the humidity in the room where they are going to be installed by unboxing them and leaving them for 24 hours. Design Preparation: Measure the wall that you are doing the installation on and plan your design. For a symmetrical installation, the first panels should be installed from the center of the wall. Using a measuring tape, find the center of the wall. Draw a horizontal line and vertical line in the center of the wall using a level to use as a guide during installation. 3D Wall Panel Installation: Use the level lines marked on the wall as a guide for your installation. Use glue / construction adhesive to apply the panels to the wall. Wipe away any excess glue with a dry towel. Make sure that each panel is level as you install them before they dry. Putty / Filler: Once all of the panels have been installed, the seams can be filled with putty/filler and then sanded for a flawless appearance. Painting / Finishing (Optional - Recommended for best results) Make sure that all dust has been removed from the face of the panels before painting. To paint the panels start with one coat of high quality primer followed by 1 to 2 coats of high quality water based paint. Paint and primer in one can also be used.