This is a left-handed casement locking handle in a gray painted finish with 2-3/8 in. mounting holes. The handle is diecast construction with the handle sweeping slightly to the left. This allows a more comfortable grip to open to the left when there are dual casement windows with a center rail dividing them. For the matching right-hand casement, and locking handle see Prime-Line part H 3541.

This Prime-Line H 3542 right-handed casement locking handle features a durable diecast construction with a sleek aluminum finish. It has 2-3/8 in. mounting holes on center and a left-sweeping handle design, providing a more comfortable grip for right-hand casement windows—especially useful in dual-window configurations with a narrow center rail.

This is a non-handed casement locking handle in an attractive finish with mounting holes 2-3/8 inch on center. This is a universal design and the handle is made of a diecast construction with the handle hanging straight down and used by a variety of aluminum and steel windows. The gap between the face plate and hook latch is 5/16 inch. In addition, there is a 3/16 inch security hole that allows and additional locking pin to be passed through the hole and lock in place with the 1/8 inch Prime-Line part S 4071 security pin (sold separately).

This Prime-Line H 3571 Right-Hand Casement Operator features a guide button that easily glides through the track. This casement window handle is used by a variety of wood and vinyl window manufacturers. Designed for right-handed casement windows. It is right-handed as viewed from the inside looking out. The body of the window handle crank is constructed of bronze diecast, with a steel arm and worm gear. The arm of the casement window crank handle replacement measures from the middle of the guide button to the middle of the crank operator while closed. For further dimensional information, please see the line drawing (not universal).

EXACTLY what I needed and works like new.. Anonymous. Thu Oct 03 2024

This is a guide rod used in Benchmark bi-fold door systems. The 5/16 inch diameter, 5-1/4 inch long steel rod and is threaded on the bottom half with a hex nut and washer. There is a 3/8 inch nylon cap on the end.

This 1-1/8 inch C-tab tandem roller assembly is designed for Window Master sliding patio doors. It features two concave steel ball bearing rollers in an adjustable stamped steel housing for smooth, quiet operation. The C-tab fits around the corner screw and is captured by the side stile and bottom rail as they are drawn together, providing a secure fit. The housing measures 9/16 inch wide with a 3/4 inch dimple width, 1-1/8 inch tall, and 3 inches long. Rear adjustment allows precise alignment, making it ideal for DIY homeowners and contractors. A Phillips head screwdriver is required for installation.