These vintage style door levers are constructed of diecast and come in a beautiful finish. They feature a heavy weighted casting design and unique Silencer bushings for smooth operation. This set of levers is designed for indoor use only, and it includes one 2-3/4 inch steel spindle, and one 3-5/8 inch steel spindle with 3/8 inch-20 threads. These French style levers fit 1/4 inch square drive spindle systems commonly found in antique and vintage door hardware sets, and with the two (2) provided square spindles, it can adjust to accommodate doors of different thicknesses. The lever shanks include setscrews for fastening to the square spindles. All other components of matching vintage design must be purchased separately to include the internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. Note: These levers cannot be used on pre-bored doors that have large, newer style doorknob holes without first prepping them to receive this older-style hardware. Installation tip: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 inch (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing.
Just wish it was for exterior use…..needed a handle with a short spindle….using it for interior handle of storm door….works great!. Will. Savannah, GA. Mon Jul 08 2024
