33'' L Double Bowl Fireclay Kitchen Sink ABF3318D-GM

Features

• Feel free to mount this sink with it's fluted finished side facing out or it's smooth finished side facing out. This sink is reversible in that regard.
• This sink is constructed of solid high-grade fireclay material using high-pressure casting, ensuring durability, longevity, and resilience to acids, alkali's, scratches, and chipping. The glazing of the sink surface provides both durability and shine over long periods of time. The raw material used (fine fireclay) allows for uniformity in the finish.
• Capable of being installed via under-mount (countertop edge of sink), top-mount (countertop lower than the top edge of sink), or Flush-Mount (countertop with sink)
• Standard 3 ½” center drain and can be used with a garbage disposal.
• Due to the organic nature of the fireclay, material dimensions may vary by 1/8" of an inch. We recommend having the sink on location to trace and measure for countertop and cabinet cut-outs. Furthermore, minor imperfections may appear. These are not defects; this is what makes each sink uniquely it's own. Defective sinks will not pass our quality control inspection and would be recycled into a new sink at the factory.
• It is required to support the sink from beneath. You can use the under-mount installation kit (Model #: ABUMSB) to the inner sidewalls of your cabinet. We then recommend putting plywood on the rods to create a large smooth flat surface. Drill the necessary drain holes. If you did not purchase the kit you will need to create a custom support using 2x4's.
• These sinks are not adversely affected by scratches from pots, pans, knives, etc.
• Heat resistant up to 350' F. This sink has been tested and will not crack due to heat exposure from a pot/pan up to 350' F hot.