1. Place the flat surface of the fixture plate horizontally on the wall facing inwards (the three holes of the fixture plate face upward)
2. Keep level and pencil out 400–500 mm above the floor, remove the fixture plate and drill 5 holes 60 mm deep with an 8 mm diameter drill into the marked position. Insert the expansion tube into the hole.
3. Place the fixture plate back in place and tighten the expansion screw to secure it.
4. Fit the body of the chair completely on top of the fixture plate, until the inside of the floor touches the wall, ensuring that the bottom of the main body aluminum and both ends of the fixture plate are neatly aligned.
5. Using the provided hexagonal wrench, tighten the two 5*8mm hexagonal stopping screws attached to the bottom of the body.
