This TV stand offers a sleek, functional design that fits seamlessly into your living space. Crafted from engineered wood, it features open shelving that provides ample room for your media devices and decor. With built-in cable management and vents, this TV stand keeps your entertainment area organized and your electronics cool. While it's designed to hold up to 270 lbs., it's the thoughtful design elements like media storage and cable management that make it a smart choice for your home. Accommodates flatscreens up to 70” wide.
I haven't assembled this unit yet, and if I see any issues when I do, I will come back and adjust the review accordingly.
First, this thing is heavy! FedEx delivered it to my door and it was a struggle to get inside. It is definitely a two-person job to get it in the house. MDF is very dense and heavier than solid wood. Some assembly steps recommend two people - we shall see. The outside packaging, however, was quite compact and as with all MDF pieces, you worry about damage in transit, but this media stand was very well packaged with styrofoam protecting all sides of the carton and slip sheets between the pieces. Very, very well packaged. The finish (mine is Walnut) is surprisingly attractive for being partially MDF (some parts are solid wood) with a veneer over it. I don't know what the veneer material is, but it looks very nice.
I unpacked the box and found a carton of fasteners and an instruction book. I have to say this is one of the best assembly manuals I've ever seen. The illustrations are complete and the detail is amazing. The hardware parts are packaged in individual packets, and the assembly book contains a complete list of all the parts included, showing quantities for each.
The components are clearly marked with letters that correspond to the step-by-step instructions. As one who used to write instruction manuals on industrial mechanical equipment, I can attest these are the best I've seen. I unwrapped each part and checked it out - all were in perfect shape. A minor cut on the outer box that was evident at delivery did nothing inside because of the presence of protecting styrofoam inserts.
This stand will go in my family room under the wall-mounted TV. I intend to put things like a DVD player, and the Home Theater amplifier, as well as my Apple TV in it. I wasn't looking for anything very pricey that would be called "fine furniture' or 'custom furniture', but frankly after seeing the finish and design, I wouldn't hesitate to put this stand in the living room or anywhere else.
I can't assemble it fully until the room is carpeted, so it will be a week or so before I can report back on the assembly process / difficulty. It looks easy enough, though from the documentation. One final positive note - the unit includes two large adjustable internal "feet" that you place under the bottom to support the unit in its middle, and prevent bowing or sagging over time. I wasn't aware of that but can see it in the pictures on Wayfair - it's a great idea and can prevent that 5-year "sag" that some MDF furniture can adopt from high humidity and having heavy things placed on it. Mark me a satisfied customer who believes this media cabinet deserves 5 stars.
EDIT 06-08-26: Finished assembling unit last night. While the assembly job was not technically complicated or difficult, it was time-consuming. There is a lot of hardware to insert and a lot of parts to assemble. The assembly gets increasingly heavy as you proceed. But here are the takeaways from my assembly experience:
1. Follow the instructions carefully (obvious) and make sure before you insert fasteners you locate the proper pre-drilled holes. Everything lines up precisely and I am amazed at the accuracy of locating the pre-drilled holes. But be careful! There are parts where a series of closely-located holes are in a part; some holes take standard screws, and some take dowels or other fasteners. Make sure before you insert a screw or a dowel you refer to the instructions to understand if you are fastening through 'outer holes' or 'inner holes'. I made one mistake there and accidentally drove a long screw where it didn't belong; split the part a bit and I had to glue it back together. No big deal, but I should have been more careful referring to the drawings.
2. The cabinet uses 38 "Cam Bolts", 16 long screws, and 26 short screws. When inserting the Cam Bolts, tighten only until the largest flat collar at the end of the threads sits flush in the hole. MDF is brittle and overdriving the cam bolt will rip it right out of the hole, requiring repair. I used an electric drill with a Phillips head insert, and set the torque to "1" - the lowest setting, after I learned that the hard way, also.
3. Locking the Cam Bolts with the Cam Locks is simple in theory. Just insert the lock into the hole, aligned to capture the bolt, and twist to tighten. Be careful here. There is no "click" or any other indication that you have not gone far enough - or have gone too far. Again, over-tightening will rip the Cam Bolt right out of the MDF. Best to use a short screwdriver with a Phillips head or a flat blade, but not so big you can over-torque the lock, and tighten hand tight then stop.
4. During the assembly process the parts being fastened together may appear a bit loose; you may feel the assembly is not becoming rigid. I had that concern but found out as you get near the end, the final assembly steps bring everything together and the combined sum of all the fasteners makes the cabinet quite rigid. So it's not necessary as I had initially suspected, to worry too much if the smaller pieces you assemble appear a bit loose. It will all tighten up at the end, and you can 'tweak' the cam locks at that point if needed. BUT ONLY TIGHTEN THE CAM LOCKS TO HAND TIGHTNESS.
5. If you use an electric drill with a Phillips head insert to drive screws, set the torque to its lowest setting. Again - it is all too easy to rip the screw right out of the MDF if you over torque.
The overall impression I got was to do everything gently - let the final assembly bring everything together to have a rigid finished product. Don't worry if the subassemblies appear a bit flexible even after hand tightening - it will all firm up at the end. Oh - you will have a few parts left over as they give you a few spares.. Connecticut Fan. CT. Mon Jun 08 2026
