Citron 1-Light Outdoor Wall Lantern with Dusk to Dawn (Set of 2)

Features

• Outdoor Porch Light with Sockets: Built-in 2 GFCI sockets, GFCI {Ground Fault Interrupter} sockets. The downward design of the GFCI outlet can better protect the outlet from rain. {Max. power 15AWG, max. load 1800W}; Built-in 2 GFCI sockets for 2-pin or 3-pin plugs. It brings convenience for outdoor patio electricity. Another one, there is overload protection for surge/short circuit/other appliances. It can protect your circuit from damage. Suitable for light strings, monitors, lawnmowers, outdoor projectors, party barbecues, etc.
• 3 lighting modes: ①Manual mode: Simply switch the wall-mounted switch "on-off-on" to manual mode within 0.5~2 seconds, keeping 100% brightness for 8 hours at night, and the sensor will automatically switch off from dusk to dawn when it detects morning. (Note: light switch in ON position, sensing distance: 35FT, sensing angle: 180°), ② Low mode: for you to save power, it will not turn on at dusk, it will be high when motion is detected and turn off detection when there is none. (iii) High mode: these outdoor lights will turn on at 30% brightness at dusk and stay on when motion is detected.
• Suitable for multiple locations: This wall-mounted outdoor light with socket is ideal for gardens, patios, hallways, garages, porches, yards, roads, courtyards, and commercial uses such as night security, area outdoor lighting, etc. The combination of wall-mounted porch lights and sockets not only solves the problem of outdoor lighting but also provides an outdoor power supply. Convenient for usual yard care and provides power for outdoor gatherings with friends and family.
• Ultra-wide detection range compatible： Socket base: Sensitive RIP motion covers 35 feet of sensing distance and 180° sensing angle. Compatible with any type of standard E26 LED bulb/incandescent bulb {up to 60W, bulb not included}. Dimmable incandescent or LED bulbs are recommended, otherwise, outdoor wall sconces may malfunction or flicker. Open bottom design allows you to easily install bulbs or clean fixtures without disassembly Includes all mounting hardware for quick and easy installation (bulbs not supplied) Remember to use incandescent or dimmable LED bulbs only.
• Compatible with any type of standard E26 LED bulb/incandescent bulb (up to 60W), dimmable incandescent or LED bulb recommended, otherwise failure or flicker will occur