Science & Lab Tables

Legs and aprons are constructed of solid red oak and are smoothly machined with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and heavy-duty 13 gauge steel corner braces. Square red oak legs, with hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and rubber leg boots. Tops are not included.

Two student workstation constructed of solid oak, oak and hardwood veneers. Includes locking storage, multiservice fixtures, top and GFI protected AC duplex receptacles. The drawer/door cabinets are equipped with a drawer on full extension glides and a cabinet with an adjustable shelf. An 18"W removable panel is located between the storage cabinets and provides access to all utilities.

Four students singles faced a workstation that provides a fully equipped science center. The unit is constructed of solid oak, oak and hardwood veneers with black phenolic resin top. The unit includes 2 sinks, four multiservice fixtures, two GFI protected AC duplex receptacles, four-rod sockets, and four book compartments. Each cabinet has four drawers and a cupboard compartment. All drawers and doors lock.

This science table with a grey frame is built to last and made for the toughest environments. 16 gauge steel frame apron and 14 gauge legs make this table virtually indestructible. The 11 gauge steel tabletop support tabs and corner brackets fuse as one with 4 heavy-duty tamper-free Loctite hex screws. The adjustable height steel legs feature a supreme dual connection. The (12 gauge) leg-base is fastened to the tabletop with 4 heavy-duty screws which get inserted into the frame using a strong welded hanger bolt. Legs connect to the frame corner brackets with industrial-grade nylon-insert lock nuts. The legs adjust in 1” increments and are locked firmly in place with 2 K-9 external tooth lock washers and heavy duty tamper-free hex screws. All legs come with a caster/gusset kit. The tabletop provides the ideal surface for lab experiments. The science tables are the best choice for your industrial-grade table needs.

The instructor's desk is constructed of solid oak, oak and hardwood veneers, this unit serves as a complete demonstration center offering a spacious work surface. The dovetailed drawers operated smoothly on epoxy coated steel glides with nylon bearings. The top is black phenolic resin. The unit includes one mixing faucet, double gas cock, GFI protected AC duplex receptacle, polypropylene trap, set of support rods and crossbar, and locks for the cupboard and all five drawers. Note, the mirror, mirror/markerboard will not fit on this unit.

This science table, with its mobile design, is built for dynamic learning environments. The spacious rectangular top provides ample room for experimentation and exploration.

Wonderful quality. Tori. Jacksonville, FL. Sat Dec 23 2023

These cabinet workstations function as a workstation, mobile storage cabinet, and demonstration table. The cabinet features a full oak veneered interior and exterior and is constructed with a resilient plywood core.

This Octagon workstation is constructed of solid oak and oak veneers and provides a convenient 4 person workstation that maximizes space. The unit comes with 16 locking drawers and 4 GFI protected AC duplex receptacles. The top is black phenolic resin.

Rock-solid lab tables with steel legs bolted solidly into corner sockets in the 3'' wide steel apron with over 3000 pounds of clamping force.

very sturdy for price. nice looking table. Kristen. Bonita Springs, FL. Mon Sep 14 2015

Cabinet is constructed from select oak and oak veneers with a clear chemical resistant finish. The unit features unbreakable aluminum sliding door glides and lock. HP laminate top. Unit also includes GFI protected AC duplex electrical outlet, extension cord, and 4" ball bearing swivel casters which lock.

Two student workstations constructed of solid oak, oak and hardwood veneers. Include locking storage, multiservice fixtures, phenolic top, epoxy sink, and GFI protected AC duplex receptacles. The two cabinets each have two adjustable shelves. There is a removable panel between the storage cabinets that provide access to all utilities.

Built to last and made for the toughest environments, the gauge steel frame apron and gauge legs make this table virtually indestructible. The gauge steel tabletop support tabs and corner brackets fuse as one with heavy-duty tamper-free hex screws. The adjustable-height steel legs feature a supreme dual connection. The leg base is fastened to the tabletop with heavy-duty screws, which get inserted into the frame using a strongly welded hanger bolt. Legs connect to the frame corner brackets with industrial-grade nylon-insert lock nuts. The legs adjust in increments and are locked firmly in place with external tooth lock washers and heavy-duty tamper-free hex screws.

We're bought about a dozen of these for multiple purposes. They are simple, durable, and sturdy, which is sometimes all you need.. Benjamin. Eugene, OR. Mon Sep 25 2023

Eight student double faced workstation that provides a fully equipped science center. The unit is constructed of solid oak, oak and hardwood veneers with black top. A unit includes four GFI protected AC duplex receptacles and eight book compartments. Each cabinet has a cupboard compartment. All doors lock.

All students will be face forward with this two-student table! Lab partners will find what they need at this sturdy table. The table comes equipped with two locking compartments and two outlets, which can be used for science equipment or for laptops/tablets. This table provides several conveniences to make sure students have what they need to stay on task. Available in Laminate, Epoxy, and Phenolic top. Phenolic resin work surface is highly impervious to a large number of harsh chemicals and acids.

This Octagon workstation is constructed of solid oak and oak veneers and provides a convenient 4 person workstation that maximizes space. The apron comes with 4 locking drawers and 4 GFI protected AC duplex receptacles. The top is black epoxy resin.

Versatile unit can be used anywhere storage and mobility are required. The adjustable position top is perfect for holding large books and papers. The top is made of marker board so messages can be displayed or drawings can be demonstrated. Directly beneath the top is storage for flat items like paper and books. The top can be positioned conveniently with the two, 10-position arms. The cabinet is constructed of oak and oak veneers. The locking doors feature full length aluminum extrusion handles. The left side of the cabinet has five tote trays that can be adjusted on centers. The right side of the unit features three drawers mounted on adjustable drawer glides that can be mounted on 0.5" centers. Cabinet rolls easily on 4" ball bearing, locking, swivel casters.

This science table has perfect chemistry with any science classroom. These paragons of endurance are built with a solid ash framework, side panels, and legs beneath a 1” thick chemical-resistant tabletop. The work surface is of solid black, firmly secured, high-pressure laminate, resistant to water, and 13 commonly-used laboratory chemicals. Robust legs are spot-welded to the frame with metal-on-metal double-bolts on 13-gauge steel corner braces for maximal strength and durability. Feet are outfitted with rubber liquid-protective boots and casters, stretchers, and braces. The SLT meets MAS Certified Green environmental industrial standards.

A table with a cute and simple design.. Kenyah. Thu Mar 02 2023

A perfect solution for ADA requirements with the ability to adjust in 2cm increments in less than 30 seconds. Add 3" spacer for even more height. Adjust only one end and you have an incline table for physics, use in elementary grades or for display work. The solid oak frame with exposed metal corner braces compliment the powder-coated legs with adjustable glides. The wood is finished with a chemical resistant, earth-friendly UV finish. Optional casters sold separately.

Well built and very sturdy tables. The adjustable height capability is a big plus.. Michael. Wales, WI. Mon May 30 2016

An accessible instructor's desk. This unit has a roll-under sink with a paddle handle faucet and gas fixture. The knee space is wide enough for a wheelchair to fit into space. The meets ADA requirements. This unit also has a duplex outlet, file drawer, three smaller drawers, and a pull-out writing board.

Two student single faced workstation that provides a fully equipped science center. Unit is constructed of solid oak, oak and hardwood veneers with flat black top. Unit includes a GFI protected AC duplex receptacle and two book compartments. Each cabinet has four drawers and a cupboard compartment. All drawers and doors lock.

NPS Steel Science Tables are built to last and made for the toughest environments. 16 gauge steel frame apron and 14 gauge legs make this table virtually indestructible. The 11 gauge steel tabletop support tabs and corner brackets fuse as one with 4 heavy-duty tamper-free Loctite hex screws. The adjustable height steel legs feature a supreme dual connection. The (12 gauge) leg-base is fastened to the tabletop with 4 heavy-duty screws which gets inserted into the frame using a strong welded hangar bolt. Legs connect to the frame corner brackets with industrial-grade nylon-insert lock nuts. The legs adjust in 1 increments and are locked firmly in place with 2 K-9 external tooth lock washers and heavy duty tamper-free hex screws. All legs come standard with simple-adjust glides with optional casters. The Chemical Resistant table top provides the ideal surface for lab experiments. NPS Steel Leg Science Tables are the best choice for your industrial-grade table needs.

Four students singles faced workstations that provide a fully equipped science center. The unit is constructed of solid oak, oak and hardwood veneers with black epoxy resin top. The unit includes 2 sinks, four multiservice fixtures, two GFI protected AC duplex receptacles, four-rod sockets, and four book compartments. Each cabinet has four drawers and a cupboard compartment. All drawers and doors lock.

The product have perfect chemistry with any science classroom. These paragons of endurance are built with solid ash framework, side panels and legs beneath 1” thick chemical resistant tabletop. The work surface is of solid black, firmly secured, high-pressure laminate, resistant to water and 13 commonly-used laboratory chemicals. Robust legs are spot-welded to the frame with metal-on-metal double-bolts on 13-gauge steel corner braces for maximal strength and durability. Feet are outfitted with rubber liquid-protective boots and Heavy Duty 3" Locking Casters and Stretchers . Includes two storage compartments concealable with the included side-panel aprons. The SLT meets MAS Certified Green environmental industrial standards.

Everything sciences teachers want. Designed with teacher input and desire for a safe, secure classroom. Teachers maintain control of the class with all students facing the instructor. The large work surface is made of chemical-resistant phenolic resin. The cabinets provide locked storage space. Side-mounted hooks hold book bags off the floor.

A perfect solution for ADA requirements with the ability to adjust. Add 3" spacer for even more height. Adjust only one end and you have an incline table for physics, use in elementary grades or for display work. The solid oak frame with exposed metal corner braces compliment the powder-coated legs with adjustable glides. The wood is finished with a chemical resistant, earth-friendly UV finish. Optional casters sold separately.

Instructors will have plenty of space to work at this island cabinet! This spacious instructor island provides a large workspace and lots of storage. Features include six locking drawers, two locking cabinets, a sink with a hot/cold gooseneck faucet, an outlet, and a single gas valve. Instructors will have plenty of space to take students step-by-step through lab experiments. Add on a compact desk extension to create an additional work area.

We had been looking for this unit for our business and Wayfair had the best price!. Wm. Bradenton, FL. Wed Jan 14 2015

Science is fun - especially when using this lab station! Perform chemistry experiments, laboratory exercises, and even cooking demonstrations from this ultimate mobile lab designed to anticipate your needs. With a large work area and a stainless steel sink, this unit was everything you need while working in front of students. Engineered for today's classroom, this lab station is designed to withstand the toughest conditions.

A unique mobile cabinet that allows the user to store, move and use many electronic devises at one time. The unit has ample storage with two dovetailed drawers and cabinets with adjustable shelves for things like, projectors, printers, laptops, PCUs and other general supply items. The phenolic top is both chemical resistant and easy to clean. The top has a cutout section (21.75"Wx17.25"D) where a monitor can be attached to a flat panel monitor arm. A monitor (not included) can adjust to be exposed above the cabinet, or used in the cabinet and seen through a Plexiglas panel that fits over the opening. A phenolic panel is also included for times when the monitor is not needed. The unit includes a pullout keyboard tray, 2 data ports, an extension cord, a duplex outlet and an inlet plug. On the backside of the unit, doors provide access to a power-strip, which has 8 outlets. Through out the unit there are holes for running cables to the appropriate areas. Venting is cleverly disguised in the bottom of the unit. This is constructed of solid oak and oak veneers with a chemical resistant, earth-friendly UV finish.

Learning is fun - especially when using this demonstration station! Perform chemistry experiments, laboratory exercises, and even cooking demonstrations from this ultimate demonstration unit designed to anticipate your needs. With a large work area, a stainless steel sink, and plenty of storage space, this unit was everything you need to keep organized while working in front of students. The learning experience and high-quality wheels allow you to roll from one classroom to the next with ease and stability. Engineered for today's classroom, this lab station is designed to withstand the toughest conditions.

This Octagon workstation is constructed of solid oak and oak veneers and provides a convenient 4 person workstation that maximizes space. The unit comes with 16 locking drawers and 4 GFI protected AC duplex receptacles. Accessories include 2 combination water/gas fixtures, 4 rod sockets and a epoxy sink with strainer, stopper and trap. The top is black epoxy resin.

This workstation that provides a fully equipped science center. Unit is constructed of solid oak, oak and hardwood veneers with blacktop. The unit includes two GFI protected AC duplex receptacles and four book compartments. Each cabinet has a cupboard compartment. All doors lock.

Create a compact work area for four with this octagon island table! Seat four students at this octagon without taking up too much floor space in your science lab. The island table is equipped with two locking cabinets and four locking drawers to securely hold students' classroom supplies and work. Additional features include four outlets, which can be used for science equipment or for laptops or tablets. This table provides several conveniences to make sure students have what they need to stay on task and is designed to sit students comfortably in a smaller space.

One piece top including sink is molded of polyolefin. Polyolefin is easy to clean, extremely chemical resistant, and is highly impact resistant to reduce glassware breakage. The low temperature strength eliminates cracking with dry ice. The long grooved sloping counter leads to the large sink in center. A unit includes a hot and cold water mixing faucet. The cabinet bases are constructed of hardwood and oak veneers and include locks. Each of the outer cabinets has one adjustable shelf. The Clean Up Sink includes pulls, locks and rubber base molding.

This American-made workstation, perfect for any home or office, features power outlets conveniently located on the desk surface. This product offers a unique blend of function and design, helping you create a productive and stylish workspace.

Save space with this instructor island! This compact instructor island desk provides the basics in a compact unit. Features include a sink with a hot/cold gooseneck faucet, a single gas valve, and an outlet. Instructors will have the basics on hand to take students step-by-step through lab experiments.

Eight students double faced workstation that provides a fully equipped science center. The unit is constructed of solid oak, oak and hardwood veneers with black epoxy resin top. The unit includes 2 sinks, four multiservice fixtures, four GFI protected AC duplex receptacles, four-rod sockets, and eight book compartments. Each cabinet has four drawers and a cupboard compartment. All drawers and doors lock.

Hexagonal work station designed to be used with standard laboratory tables. Accommodate more students and provide efficient use of floor space. This unit features a molded epoxy resin top with a drop-in hexagonal lipped sink. The apron and pedestal are constructed of solid hardwood, solid oak, and oak veneers, with a clear chemical resistant finish. Three GFI duplex receptacles. The center pedestal has a removable panel to access utilities. The top is solid epoxy resin.

Instructors will have plenty of space to work at this island cabinet! This spacious instructor island provides a large workspace and lots of storage. Features include four large locking drawers, one small locking drawer, two locking cabinets, a sink with a hot/cold gooseneck faucet, a single gas valve, and an outlet. Instructors will have plenty of space to take students step-by-step through lab experiments. Add on a compact desk extension to create an additional work area.

Mobile instructor's desk is equipped with two cupboard compartments, one file drawer, two smaller drawers and a pull out writing board. Constructed of oak and oak veneers this unit is equipped with a pegboard with 50 assorted hooks, stainless steel sink, hand pump, water bottles, full upright set, extension cord, and GFI protected AC duplex electrical receptacle. Unit has space to store the optional mirror/markerboard. All drawers and doors lock. The unit has a ChemGuard top and rolls on 4" ball bearing locking swivel casters.

Most popular workstation and have made it ADA compatible. Constructed of hardwoods and oak veneers and finished with a chemical resistant finish. The epoxy resin top is available with a sink and two combination water/gas fixtures with paddle handles. The sink includes the trap, stainer and stopper. The sloping front allows a person in a wheelchair to roll right up to the sink area. The door cabinet features a area with an adjustable shelf, locks, and ADA complient pulls. The unit also includes 2 GFI protected duplex outlets and rubber base molding.

National Public Seating's strong and sturdy science tables with book compartments are a necessity for your science lab. Built from solid ash wood with an attractive polyurethane clear finish, our science lab tables are perfect for many science and chemistry classrooms. HPL tabletops provide an exceptional work surface and are made with a high-pressure laminate that has been tested according to NEMA standards to resist scratches, boiling water, high temperatures, and many forms of stains, including a number of acids. Also exceeds 1800 wear cycles and over 125 inches of ball impact resistance. HPL tabletops come equipped with our top-of-the-line ribbed-tongue T-molding. The table legs are assembled with a 13-gauge, heavy-duty steel brace attached with a metal-on-metal double-bolt connection for superior durability and to provide a no-wobble experience. NPS science tables offer a choice of book compartments or solid front aprons, with an industry top-of-the-line ash wood frame and legs outfitted with rubber liquid-protecting leg boots and adjustable glides for accurate floor leveling.

Manufacturing or shipping defect leads to easily marred surface. First one had highly visible chipped off area exposing the wood composite underlay of the desk table top. Even second replacement top has noticeable scratch that we will live with. Table top is a very heavy piece! The replacement process has left us with the choice of a difficult disposal ourselves or another appointment for pick up of the defective piece. Wayfair handles these manufacturers’s issues readily and wisely. Very much recommend them. Manufacturer needs to fix packaging or inspection. Not sure which.. Kathy. Cambridge, MA. Mon Feb 07 2022

All students will be facing forward with this two-student table! Lab partners will find all the amenities with this two-student table and still have plenty of legroom. The table comes equipped with a large compartment that locks and an outlet, which can be used for science equipment or for laptops or tablets. This table provides several conveniences to make sure students have what they need to stay on task and has an open design to keep your lab looking less cluttered.

Demonstration center with GFI protected AC duplex electrical receptacle, and extension cord. The unit includes four drawers which are dovetailed and mounted on epoxy coated glides. Sliding doors with a lock conceal the four drawers and storage compartment for large equipment. Unit has a ChemGuard top and rolls easily on swivel casters with brakes.

30"Height Titan Table Butcher Block Table Top. The innovative engineering and design of the Titan table ensure that this table delivers superior performance for the most demanding applications. This table is ideal for outfitting laboratories, robotics teams, and any other commercial, industrial, or educational settings requiring industrial-grade worksurfaces. Featuring a sturdy frame with 14-gauge steel legs set at a 94-degree angle, an under-table hat structure, and a 6-mm thick super-duty footplate, the Titan table is built like a tank. Multiple tabletop options ensure that the Titan Table can easily be adapted for any application. The Chem-Res tabletop, for example, features a chemical-resistant finish, making it ideal for use in labs and other chemical environments. On the other hand, the Butcherblock tabletop is perfect for maker space and food service applications. The Titan table also provides easy mobility and maneuverability in any environment without sacrificing stability, thanks to the 4” total lock casters that feature a polyamide plus TPU tread. Available in a variety of sizes and three different heights, the Titan table can be easily adapted to any space and offers maximum versatility making it ideal for any environment where durability is a must.

National Public Seating strong and sturdy Science Tables are a necessity for your science lab. Built from solid ash wood with an attractive polyurethane clear finish, our Wood Frame Science Lab Tables are perfect for science and chemistry classrooms. The table legs are assembled with a 13-gauge, heavy-duty steel brace attached with a metal-on-metal double bolt connection secured with nylon threaded lock nuts for superior holding strength. NPS® Science Tables are offered with book compartments or a solid front apron. Each leg is outfitted with rubber liquid-protecting leg boots and adjustable glides for accurate floor leveling, offering a wobble-free experience. The Whiteboard is made from 1.25 Industrial Grade Particleboard with a High-Pressure Laminate top and 3mm Edge banding

I wish these were a little taller but great quality. Desiree. Cannon Afb, NM. Wed Apr 15 2026

30" Height Titan Table Phenolic Table Top. The innovative engineering and design of the Titan table ensure that this table delivers superior performance for the most demanding applications. This table is ideal for outfitting laboratories, robotics teams, and any other commercial, industrial, or educational settings requiring industrial-grade worksurfaces. Featuring a sturdy frame with 14-gauge steel legs set at a 94-degree angle, an under-table hat structure, and a 6-mm thick super-duty footplate, the Titan table is built like a tank. Multiple tabletop options ensure that the Titan Table can easily be adapted for any application. The Chem-Res tabletop, for example, features a chemical-resistant finish, making it ideal for use in labs and other chemical environments. On the other hand, the Butcherblock tabletop is perfect for maker space and food service applications. The Titan table also provides easy mobility and maneuverability in any environment without sacrificing stability, thanks to the 4” total lock casters that feature a polyamide plus TPU tread. Available in a variety of sizes and three different heights, the Titan table can be easily adapted to any space and offers maximum versatility making it ideal for any environment where durability is a must.

A safe, convenient way to store and share your microscopes. Constructed of solid oak and oak veneers with front and back swinging doors. The unit contains removable dividers to provide an individual space for each microscope. Designed to hold 24 standard classroom microscopes the space allotted. The unit features a HP laminate top and 4" ball bearing, locking, swivel casters. Individual compartment size for microscope.

This cart charges and stores so it is really handy for any science classroom. Erin. Brooklyn, NY. Sun Aug 13 2017

Four students have plenty of room to work! Seat four students at this table without taking up too much floor space in your science lab. The table comes equipped with a large storage compartment that locks, a sink with two cold water gooseneck faucets, four gas valves, and four outlets, which can be used for science equipment or for laptops or tablets. This table provides several conveniences to make sure students have what they need to stay on task and is designed to sit students comfortably in a smaller space.