Most rain barrels on the market don't fully utilize the water they hold because the spigot is located about halfway up the barrel. This is to allow buckets to be filled but leaves about a quarter of the water behind. And this remaining water is standing which can be hazardous. Barrels with optimally located spigots don't allow room for buckets and leave only hoses as the draining option. This 50-stand solves these issues by lifting and supporting the 50 rain barrels off the ground. With increased elevation, the barrel can drain at a much faster rate. Any filling device can be easily placed below the spigot without awkward tilting or maneuvering.