Parameters:
Power type: Manual
Material: cast iron(body)+PVC（press board）
Product Size: 50x30x38cm
Roller Diameter: 89mm
Roller Adjustment: 60mm
Handwheel Diameter: 16cm
Shipping Size: 55x49x47cm/21.6''x19''x18.5''
Package Weight: 19.5KG/43lbs
Mainly used for making relief plate, gravure production, other kinds of pressed artworks
Usage Method:
1. Place the print to be made on the panel.
2. Turn the lifting handwheel to adjust the roller to the proper height.
3. Turn the hand wheel on the side to make the panel advance slowly until the work is finished.
Notice: Not recommended for clay, It is used for woodblock prints better.
Package List:
1 x Manual Slab Roller Printmaking Machine
Notice:
1.After the operation, wipe the panel and pressure roller clean with semi wet soft cloth or sponge.There is no need to wash with a lot of water.
2.Do not use sharp tools to cut the panel.
3.If clay is embedded in the pattern of roller, brush lightly with a little water. Do not use wire brush and other tools to clean, so as not to damage the pressure roller.
