Iron Plains Metal Circular Dual Mount Bathroom Sink with Overflow K-20211-DGB

Features

• The faucet, drain assembly, p-trap, and shut-off valve are sold separately.
• Undermount
• Refer to Spec Sheets for Required and Compatible parts to complete installation
• The Overall Length of a sink is measured in inches from left to right. Remember that for drop-in sinks with edges or lips, the Overall Length should be no more than 1" greater than the length of the installation hole in your countertop.
• The Overall Height of a sink is the external measurement from top to bottom, while the Overall Depth is the interior measure of how much water the sink can hold.
• The Overall Width of a sink is measured in inches from front to back. Again, the Overall Width for drop-in sinks with edges or lips should be no more than 1" greater than the width of the installation hole in your countertop -- keep this in mind when measuring space for your faucet.
• The Overall Length of a sink is measured in inches from left to right and the Overall Width is measured from front to back.
• Remember that undermount sinks are typically set back 2"-2.5" from the front of the counter.
• Undermount sinks are mounted from below the countertop, so before beginning installation, check to make sure the countertop is 1/2"-1" thick.