Features

• Due to the organic nature of the fireclay, material dimensions may vary by 1/8" of an inch. We recommend having the sink on location to trace and measure for countertop and cabinet cut-outs. Furthermore, minor imperfections may appear. These are not defects; this is what makes each sink uniquely it's own. Defective sinks will not pass our quality control inspection and would be recycled into a new sink at the factory.
• It is required to support the sink from beneath. You can use the undermount installation kit (Model #: ABUMSB) to the inner sidewalls of your cabinet. We then recommend putting plywood on the rods to create a large smooth flat surface. Drill the necessary drain holes. If you did not purchase the kit you will need to create a custom support using 2x4's.
• A sink grid is not included