Features

• Our stainless steel Towel Shelf & Hang Bar with its modern square features has been designed to assist with extra storage and keep your bathroom neat and organized. The hang bar has the capacity to hold two folded towels side by side and the shelf above can store extra clean towels on the shelf or organize your bathroom essentials. Manufactured from the highest grade stainless steel, your bathroom accessory will not rust. Perfect for the bathroom environment.
• Hang Bar to hold 2 single folded bath sheets. Shelf to store extra towels. In smaller bathrooms ideal to install it on the wall at the end of a bath or above a toilet. Stainless Steel construction ensures durability, the sturdy horizontal bar won’t sag under the weight of damp towels.
• Fixing system: RIGID Loc mounting system. The innovative, one-of-a-kind RIGID Loc mounting system was engineered to ensure our bathroom accessories remain locked in place and to prevent constant retightening and maintenance of loose or wobbly paper holders, towel rings, and other accessories. This product uses our patented RIGID Loc mounting system which is designed to ensure the bathroom accessory remains secure to its mounting and will not rotate.
• Grade 304 stainless steel is the finest material choice for our bathroom accessories because its natural corrosion resistance properties prevent rusting, staining, peeling, flaking, or chipping. Grade 304 stainless steel is also a hygienic material – it is nonporous, and it does not collect bacteria or algae. Stainless steel does not require any protective coating which makes this material ideal for the bathroom environment. The shiny polished finish of stainless steel is often confused with a chrome finish, however, the two could not be more different. While stainless steel will not peel or flake, chrome products on the other hand are susceptible to chipping and pitting due to the nature of a coated product.
• What’s in the box: 8593 towel shelf and hang bar, Fischer UX 6 plastic plugs (4 pieces). wall screws (4 pieces) 3/32″ (2.5mm), Allen key (1 piece).
• Tools needed (not supplied): Drill & drill bits, 1/4″ (6mm) diamond drill bit – if drilling through ceramic tiles, 1/4″ (6mm) Masonry drill bit – if drilling into Masonry (brick), measuring tape, PH2 screwdriver, pencil, spirit level.
• Suitable to be installed: Masonry or Concrete surface (wall fixings supplied), Tiled surface (wall fixings supplied), Drywall - mounting onto stud (wall fixings not supplied), Glass (using Bathroom Butler glass mountings - optional extra).
• Cleaning and care: To keep your product in pristine condition, simply wipe it down with a warm damp cloth and then buff dry with a microfiber cloth. You could also occasionally use a Chlorine-free stainless steel cleaner to maintain the shine. If you use stainless steel polish, make sure it is abrasive-free. When cleaning wall surfaces around your bathroom accessories do not use any household detergents that may contain Chlorine-based chemicals such as bleach as it will cause permanent damage to the surface of the stainless steel product. Clean regularly with a warm damp cloth, and then buff dry with a clean dry cloth. Do not use the rough end of a kitchen sponge to clean your bathroom accessory. To remove any small blemishes or fine scratches, use a non-abrasive metal polish. Do not clean your bathroom accessory with any kind of acid-based chemical, tile cleaner, or detergents that contain Chlorine, as these may contaminate and damage the surface finish.
• Installation tip: Check for water pipes before deciding where to drill. In Masonry walls, always drill a smaller pilot hole first for better sizing and location accuracy.
• Easy to install.