Prime-Line Shutters

This screen frame is constructed from aluminum and comes finished in white. It has a 0.020 gauge and is 72 inch long. Use spline size 0.165 for aluminum mesh or 0.185 for fiberglass mesh.

This is a spring-loaded tilt latch made of injected molded plastic in matte black. Typically used on sash panels designed to tilt-in and down from the top for cleaning. 3-1/4 inch in length, 1-3/8 inch width, 2-1/16 inch hole centers with a 3/4 inch backset. Used by a variety of window manufactures. Each package contains 1 left-hand latch and 1 right-hand latch to repair 1 window.

Prime-Line 34-1/2 inch Molded Plastic Screen Door Grille allows for maximum screen coverage on standard 30 to 36 inch Sliding Screen Door. Proper installation of grille adds strength to entire door and helps prevent screen fabric damage. Molded Plastic grille body measures 26-1/8 inch wide x 20 inches tall. The tabs extend 4-1/8 inches and can be easily trimmed. Molded Black Plastic.

These screen clips are constructed from zinc diecast. They feature a 5/16 inch design perfect for low profile applications and include installation screws. These clips are used to attach your screen to your window opening. Easy to install in minutes with a few minor tools. All necessary fasteners will need to be purchased separately. Typically used on 5/16 inch screen frames.

This pile weather-stripping is used on aluminum or vinyl window and doors to seal out air, insects, dust, and noise. Fits into a C-channel designed into the frame. Patented installation design, makes repairs easy. Gray in color, fits 3/16 inch wide groove, 0.150 inch high pile. 100 ft. per package.

Has the seal on you sliding screen door ripped or deteriorated in the sun? This sliding screen door bug seal is 84 inch long, with tear strips that make it adjustable from 1 inch to 1-3/4 inch widths (best results if you use a straight edge and sharp knife to cut the strips). It has a press in fit installation. The press in insert is 0.485 inch wide. It is black vinyl and seals off the gap between the sliding screen door and the patio glass door to protect from unwanted pests. Order yours today to keep pests from entering your home or office. INSTALLATION TIP: Soak in hot water to help relax the material so it can be installed easier and the material will reshape to its original form before being compressed in the packaging.

These spring steel retainer clip hold 3/8 inch screen frame into aluminum window channel. They come in a bright steel finish.

This glass glazing spline is constructed of top quality vinyl and it is gray in color. It measures 0.160 inch wide by 0.390 inch in height and comes in 200 ft. lengths. This glass retainer spline is used for the construction or repair of glass and Plexiglas windows.

These 1/4 inch by 7/16 inch plastic screen frame corners are designed for repairing or constructing aluminum window screen panels using square cut frame ends. They fit standard 1/4 x 7/16 inch aluminum screen frame material and slide securely into the open ends of the frame to create a strong ninety degree corner. The square cut design eliminates the need for miter cutting, making screen repair and replacement simpler and more accessible for homeowners and DIY users. Made from durable white molded plastic, these screen frame corners provide a lightweight and cost effective solution for replacing broken or brittle corners on existing window screens or for building new screens from raw frame stock. The exposed corner design allows a portion of the corner to extend beyond the frame end, which is typical for square cut screen assemblies and helps maintain proper frame alignment. Installation is quick and does not require tools, fasteners, or adhesives, making it ideal for routine maintenance, seasonal screen repairs, rental property upkeep, or large home projects. Each package includes 4 screen frame corners to support multiple repairs or full screen builds, offering excellent value for homeowners and professionals alike. These corners are intended for standard residential window screen applications and are commonly used in houses, apartments, and multi unit dwellings. Always compare your existing aluminum screen frame dimensions to the line drawing before purchasing to ensure proper fit and compatibility.

This is a spreader bar for large screen frames that allows the screen frame to retain its shape. Constructed from roll formed aluminum that has a 0.025 gauge for strength. They are used with spreader bar clips to keep your screen frame rigid. Comes in a mill finish.

This item is a screen table top carpeting for application onto a table that is used for fabricating window screens and/or screen doors. The carpet protects the screen frame material from scratches and provides a slip resistant surface for rolling the screen fabrics into the frames. The carpet is a tough indoor/outdoor felt material that can be easily cleaned with a hand held vacuum. Gray. 1 roll per package.

These screen clips are constructed from zinc diecast. They feature a 5/16 inch design perfect for low profile applications and include installation screws. These clips are used to attach your screen to your window opening. Easy to install in minutes with a few minor tools. All necessary fasteners will need to be purchased separately. Typically used on 5/16 inch screen frames.

These 1/4 inch by 3/4 inch aluminum screen frame corners are designed for repairing or constructing aluminum window screen panels using square cut frame ends. They fit standard 1/4 x 3/4 inch aluminum screen frame material and slide securely into the open ends of the frame to create a strong ninety degree corner. The miter cut design is largely used for larger screen frames, or in high wind areas or when pets are a concern for DIY users across the United States. Made from stamped aluminum, these screen frame corners provide a lightweight and cost effective solution for replacing broken or brittle corners on existing window screens or for building new screens from raw frame stock. The miter cut leaves a clean corner design that makes the screen frame look amazing. Installation is quick and does not require tools, fasteners, or adhesives, however a mallet or wood block are often used to seat the corners. Each package includes 100 screen frame corners to support multiple repairs or full screen builds, offering excellent value for homeowners and professionals alike. These corners are intended for standard residential window screen applications and are commonly used in houses, apartments, and multi unit dwellings. Always compare your existing aluminum screen frame dimensions to the line drawing before purchasing to ensure proper fit and compatibility.

Restore security and improve the performance of your single or double hung vinyl windows with this cam action window sash lock. Designed to replace worn, damaged, or outdated sash locks, this durable lock helps keep window sashes tightly secured while enhancing protection against unwanted entry. Its classic brass finish adds an attractive appearance that complements a variety of window styles and interior décor. Constructed from durable diecast metal, this sash lock is engineered for reliable everyday use and long-lasting performance. The cam action hook design draws the window sash tightly against the keeper when locked, helping improve window security, reduce sash movement, and maintain a snug fit between window components. This positive locking action helps promote proper window closure and can assist in reducing rattling caused by loose-fitting sashes. For additional security, the lock body features anti-jimmy studs that engage the keeper when the window is locked, helping resist tampering and forced opening attempts. Designed with mounting holes spaced one and three quarters inches on center, this replacement lock fits many single and double hung vinyl window applications. Installation hardware is included to simplify replacement and repair projects for homeowners and maintenance professionals. Whether upgrading existing window hardware or replacing a broken sash lock, this cam action window lock provides dependable operation, enhanced security, and an attractive finished appearance.

This is a professional grade screen rolling tool with wood handle primarily used for installing aluminum or fiberglass screen fabric into window screens and screen doors. Designed for production usage, it is a specialized combination rolling tool with a 2-1/2 inch x 1/16 inch convex steel roller and ball-bearing hub at one end and a 2 inch x 3/32 inch concave steel roller and ball-bearing hub at the opposite end. To be used with vinyl screen spline sizes 0.115 inch up to 0.165 inch

This is a spring-loaded tilt latch for both single and double hung vinyl windows. This is an injected molded plastic in white, with fasteners. Used on sash panels designed to tilt-in and down from the top for cleaning, 3-3/8 inch in length, 1-1/4 inch width and 2-5/16 inch hole centers, 5/16 inch backset. Each package contains 1 left-hand latch and 1 right-hand latch to repair 1 window each.

This screen table jig set by make-2-fit is constructed of extruded aluminum and comes in a mill finish. Using a bench top jig set like this one allows the screen to be held firmly and squarely in place while installing screen fabric. The set includes five bars (two bars are drilled for fastening to the workbench table, and three are free moving bars), and 12 movable aluminum screen frame clips for 3/4 inch frame. This set is easy to install.

These are retainer clips constructed from spring steel. Used to hold screen frame onto aluminum window channel. 13/16 inch length and 3/8 inch width.

These 5/16 inch by 3/4 inch aluminum screen frame corners are designed for repairing or constructing aluminum window screen panels using square cut frame ends. They fit standard 5/16 x 3/4 inch aluminum screen frame material and slide securely into the open ends of the frame to create a strong ninety degree corner. The miter cut design is largely used for larger screen frames, or in high wind areas or when pets are a concern for DIY users across the United States. Made from stamped aluminum, these screen frame corners provide a lightweight and cost effective solution for replacing broken or brittle corners on existing window screens or for building new screens from raw frame stock. The miter cut leaves a clean corner design that makes the screen frame look amazing. Installation is quick and does not require tools, fasteners, or adhesives, however a mallet or wood block are often used to seat the corners. Each package includes 100 screen frame corners to support multiple repairs or full screen builds, offering excellent value for homeowners and professionals alike. These corners are intended for standard residential window screen applications and are commonly used in houses, apartments, and multi unit dwellings. Always compare your existing aluminum screen frame dimensions to the line drawing before purchasing to ensure proper fit and compatibility.

This is a U-shaped glass retaining spline, also referred to as glazing channel. It is typically used with aluminum window frame to cushion and insulate the glass. The product is black vinyl 0.290 inch wide x 0.275 inch deep and accepts single strength (3/32 inch) glass or Plexiglas. 750 ft. per roll.

These screen clips are constructed from gray plastic. They feature a 1/16 inch design perfect for low profile applications and include installation screws. Clips are used to attach your screen to your window opening.

This 1,000-piece pack of aluminum screen clips (screws sold separately) offers a comprehensive solution for securing window and door screens in residential, commercial, and high-volume maintenance settings. Manufactured from durable, corrosion-resistant aluminum, each clip holds screens firmly in place while providing a clean appearance. Perfect for screen replacement jobs, property managers, or large projects—this bulk pack delivers both convenience and value, making it easy to maintain multiple units efficiently without sacrificing quality. Screws and fasteners are not included.

These 1/4 inch by 3/4 inch plastic screen frame corners are designed for repairing or constructing aluminum window screen panels using square cut frame ends. They fit standard 1/4 x 3/4 inch aluminum screen frame material and slide securely into the open ends of the frame to create a strong ninety degree corner. The square cut design eliminates the need for miter cutting, making screen repair and replacement simpler and more accessible for homeowners and DIY users across the United States. Made from durable white molded plastic, these screen frame corners provide a lightweight and cost effective solution for replacing broken or brittle corners on existing window screens or for building new screens from raw frame stock. The exposed corner design allows a portion of the corner to extend beyond the frame end, which is typical for square cut screen assemblies and helps maintain proper frame alignment. Installation is quick and does not require tools, fasteners, or adhesives, making it ideal for routine maintenance, seasonal screen repairs, rental property upkeep, or large home projects. Each package includes 4 screen frame corners to support multiple repairs or full screen builds, offering excellent value for homeowners and professionals alike. These corners are intended for standard residential window screen applications and are commonly used in houses, apartments, and multi unit dwellings. Always compare your existing aluminum screen frame dimensions to the line drawing before purchasing to ensure proper fit and compatibility.

This backplate is constructed of stamped steel and comes in a nickel plated finish. It is used to cover marred doors, and allows for conversion of a 2-3/8 inch backset to a 2-3/4 inch backset or vice versa.

This glass glazing spline is constructed of top quality vinyl and it is gray in color. It measures 0.160 inch wide by 0.445 inch in height and comes in 200 foot lengths. This glass retainer spline is used for the construction or repair of glass and Plexiglas windows.

This screen retainer spline is constructed of top quality vinyl that is round in shape. It features a hollow core center, it is serrated on its exterior surface, and it is black in color. Vinyl screen retainer spline like this one is used to hold fiberglass and aluminum screen material to screen frames of both windows and doors. This retainer spline has an outside diameter of 0.180 inch (3/16 inch) and measures 250 ft. in length.

These spring steel ram's horn-shaped clips are used to secure half screens to openings. They measure 1-5/8 inch wide and have a bright chrome color.

This is a foam screen retainer spline designed to be use for securing various types of screen fabric into a window screen or screen door frame. 0.180 inch in diameter. It is a top quality, round, smooth polyethylene with a flexible foam core. This is also an excellent substitute for metal spline. Color is black. 500 ft. per roll.

This screen retainer spline is constructed of top quality vinyl that is round in shape. It features a hollow core center, it is serrated on its exterior surface, and it is black in color. Vinyl screen retainer spline like this one is used to hold fiberglass and aluminum screen material to screen frames of both windows and doors. This retainer spline has an outside diameter of 0.180 inch (3/16 inch) and measures 250 ft. in length.

This sliding window lock is constructed of diecast and comes in a white painted finish. This lock is designed for use on horizontal vinyl sliding windows, yet it may also work with some vertical sliding (single hung) windows, depending upon the type of vinyl liners and balances used to construct the windows. Note: these locks will fit most all horizontal vinyl sliding windows and some vertical sliding windows, but not all of them. These locks feature an adjustable jaw that has a vise-like grip, and they are capable of opening up to 1/2 inch wide for a secure, non-marring hold on thick vinyl rails. When installing this lock, the cam style locking lever should be rotated hand-tight over the rail or vinyl edge to a sufficient torque prior to locking down the lever. Can be adjusted to fit on rail thicknesses ranging from 1/16 inch to 1/2 inch thick. Used as a secondary lock when window is shut and to secure the windows during ventilation. For a larger version of this lock (used on vinyl frame patio sliding doors) see Prime-Line part U 10547. No tools are required for installation.

This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

This is an steel lock with a brass finish used for vertical windows. Typically these locks are used to secure a window in the ventilating position to allow fresh air in and keeps the room secure. When in use these locks allow you to lock window in either a closed or ventilating position. Maintain the security of your home and allow some ventilation of your room. Each package contains 2 locks and screws so you can secure multiple windows.

These lift tabs are constructed of stamped aluminum and come in a mill finish. They measure 1-1/8 inch in width, with a 1/4 inch span, by 3/4 inch in height. These pull tabs are designed to install in the spline channels of 1 inch screen frame, and they help ease removal of window screens.

Theses are jig clips that attach to the Prime-Line part P 7924 screen table jig. They aid in the replacement or new construction of window screen frames.

These 7/16 inch by 3/4 inch aluminum screen frame corners are designed for repairing or constructing aluminum window screen panels using square cut frame ends. They fit standard 7/16 x 3/4 inch aluminum screen frame material and slide securely into the open ends of the frame to create a strong ninety degree corner. The miter cut design is largely used for larger screen frames, or in high wind areas or when pets are a concern for DIY users across the United States. Made from stamped aluminum, these screen frame corners provide a lightweight and cost effective solution for replacing broken or brittle corners on existing window screens or for building new screens from raw frame stock. The miter cut leaves a clean corner design that makes the screen frame look amazing. Installation is quick and does not require tools, fasteners, or adhesives, however a mallet or wood block are often used to seat the corners. Each package includes 100 screen frame corners to support multiple repairs or full screen builds, offering excellent value for homeowners and professionals alike. These corners are intended for standard residential window screen applications and are commonly used in houses, apartments, and multi unit dwellings. Always compare your existing aluminum screen frame dimensions to the line drawing before purchasing to ensure proper fit and compatibility.

This is an emergency gas shut-off wrench is used to shut off your gas line in the event of a leak, accident, natural disaster or other emergency. This inexpensive tool is an invaluable addition to any household as it helps to keep your family safe in the event of an emergency, or for other gas line repair work.

These are white plastic constructed clips used to attach screens or storm windows to openings in a flush mounting. Feature the double wing.

This window sash lock is constructed from diecast. It features an Allen head security screw and wrench that securely locks window in closed or ventilating position. This type of sash lock helps prevent accidental opening by children and is easy to install.

These extruded aluminum clips attach storm windows or screen panels to storm door frame, with existing screws. Note: fasteners not included with this pack of clips.

Used for making new window frames

Do you have vertical sliding vinyl windows with loose-fitting, worn or missing locks? Besides adding a “new look” to your vinyl windows with a fresh set of locking hardware, these sash locks can help add peace of mind by restoring the security features on your vertical sliding vinyl windows. These locks can mount on most single-hung and double-hung vertical sliding windows constructed of vinyl. Each lock features a cam-type mechanism that is designed to draw the keeper in firmly towards the lock, providing your windows with tighter seals, better weatherizing, and increased security. They are constructed of heavy-duty vinyl composite material, and come in a corrosion-resistant, stylish matte black smooth finish to match other existing hardware that may already be in the home. Depending on the size of the sash, these locks can be used as singles or in pairs. Each set includes one lock and keeper, installation fasteners and simple instructions. Installation of these sash locks is easy and can be done with a simple handheld Phillips head screwdriver. Other design features include cam-action fastening and 2-1/16 inch mounting hole centers on both the lock and keeper. These sash locks mount on vertical sliding vinyl windows where the checkrails (also known as “meeting rails”) of both the inner and outer sash rest flush. Compare the style and dimensions of this lock to those required on your sliding windows and order yours today.

Do you find yourself needing a quick and simple way to trim the excess screening off your freshly constructed screen frame? This Prime-Line Screen Trimming Tool will zip down your 5/16 inch screen frame perfectly trimming the extra screening to make the screen look perfectly aligned to the window frame for smooth, professional cuts. It has a flip blade that safely switches from cutting to closed mode. This screening tool is a must have for all people wanting to make their screening repair jobs looking profession. It is quick and easy to trim the excess screen material with this lightweight and portable tool designed to help simplify screen installation.

"Secure and maintain your window and door screens with this high-quality screen retainer spline. Designed for reliable performance, this round vinyl spline is ideal for holding fiberglass or aluminum screen material firmly in place within screen frames. Its serrated outer surface ensures a tight grip in the groove, helping prevent screen loosening over time while maintaining a clean, professional finish. Constructed from durable black vinyl with a hollow core, this spline offers flexibility for easy installation while still delivering long-lasting hold and resistance to wear. The diameter makes it suitable for many standard screen frame applications, whether repairing damaged screens or building new ones. The length, this roll provides enough material for multiple projects, making it a cost-effective solution for homeowners and professionals alike. Perfect for routine maintenance, seasonal repairs, or full screen replacements, this spline is a must-have for keeping insects out and airflow in. Always compare your existing spline size to ensure the best fit and performance."

This is a rectangular, solid brass wardrobe door pull with a stylish matte black finish. The rectangular face is 1-3/8 inch wide and 3-1/4 inch tall with an oblong inset finger pull stamped within. Oblong inset fits into a 7/8 inch by 2-5/8 inch mortise in the side of the door. Rectangular face gives a nice finish to the handle's installation. Two handles and fasteners are included in each sealed package for a complete installation.

Secure fiberglass and aluminum screen material with the Prime-Line Screen Retainer Spline. Designed for new screen installations and screen repair projects, this durable vinyl spline helps hold screen mesh firmly within the frame channel of window screens, screen doors, and patio screen enclosures. Whether replacing worn spline or building custom screens, this retainer spline provides reliable screen retention and consistent performance. Constructed from high-quality black vinyl, this spline features a round profile with a hollow core and serrated exterior surface. The hollow-core design allows for flexibility during installation, while the serrated outer surface helps create a secure grip within the screen frame channel to keep screen material firmly in place. Suitable for use with both fiberglass and aluminum screen mesh, it is a versatile solution for residential and commercial screen applications. This spline comes in a convenient roll, making it ideal for multiple screen repairs or larger screen fabrication projects. Easy to install with a screen rolling tool, it provides dependable screen retention and long-lasting performance. Compare your existing spline diameter and frame channel dimensions before purchasing to ensure proper fit."

These Eastern style door grilles are designed to fit multiple door widths by allowing bracket ears to be trimmed to size. Proper installation of grille adds strength to entire door, and helps prevent screen fabric damage or glass damage. Designed to fit multiple door widths.

Complete window and door screen repairs with confidence using the Prime-Line Screen Rolling Tool. Designed for installing screen fabric and vinyl spline into screen frames, this essential hand tool makes screen replacement projects faster, easier, and more precise. Whether you're repairing a single damaged screen or completing multiple installations, the durable dual-wheel design helps reduce the risk of tearing screen material during installation. Built for long-lasting performance, this screen roller features a comfortable wood handle and steel roller wheels engineered to withstand repeated use. The smooth-rolling wheels help guide both screen material and spline into the screen frame channel, making installation more efficient for DIY homeowners and professionals alike. Compatible with most screening materials, this versatile tool is suitable for use on window screens, screen doors, and patio screen projects. The combination roller design features a convex steel wheel on one end and a concave steel wheel on the opposite end, providing flexibility for different stages of the screening process. Designed for use with vinyl screen spline ranging from 0.115 in. to 0.165 in. diameter, this tool helps ensure proper screen installation and secure spline placement. Before purchasing, verify your spline size requirements to ensure compatibility with your screen repair project.