Thin Electric Fireplace, Wall Mounted & In-Wall Recessed Heater with Remote Control, 5100 BTU, 12-Color Flame & Crystal Bed Modes, Timer, Sleep Mode

Features

• Customizable Flame & Flame Bed — Create your preferred ambiance with 12 flame color settings (Color A), 12 flame bed color settings (Color B), five flame speeds (U1–U5), and five flame brightness levels (L1–L5). Decorative crystals reflect the LED flame bed lighting for a colorful, eye-catching display. Press and hold the Color A or Color B button for 6 seconds until the display shows “0” to activate automatic color and brightness cycling for the selected effect.
• Slim Design & Two Installation Options — Measuring just 3.86 inches deep, this electric fireplace supports wall-mounted or recessed installation. Its sleek design complements living rooms, bedrooms, and home offices while helping save floor space. Follow the installation instructions and required clearances in the user manual.
• Supplemental Heat & Year-Round Ambiance — Choose between two heat settings: 750W on low and 1500W on high, with a maximum heat output of 5100 BTU/h. Enjoy the flame display independently of the heating function throughout the year. Electric operation requires no firewood and produces no smoke or ash.
• Remote & Touch Panel Control — Adjust power, heat settings, flame colors, flame bed colors, brightness, speed, and timer using the included remote control or touch panel. Before using the remote, turn on the main power switch and remove the battery’s insulating tab. Point the remote toward the front of the fireplace within 5 meters (approximately 16 feet).
• Timer & Lights-Off Heating Mode — Set the automatic shutoff timer from 1 to 8 hours. For heating without illumination, press and hold the Dimmer button for 6 seconds to turn off all lights while the heating function continues. Press and hold the button again for more than 6 seconds to restore normal operation. Do not leave the heater unattended while operating.
• ETL Certified & Overheat Protection — This ETL-certified electric fireplace features a built-in safety thermal cutoff that stops heating if the unit overheats. If it activates, turn the fireplace off, unplug it, and allow it to cool for at least 10 minutes. Check for blocked air inlets or outlets and clear any obstruction before restarting. If the problem persists, contact customer support.
• Safe Use & Clear Airflow — Keep the air inlets and heater outlet on the upper front of the unit unobstructed. Do not cover the fireplace. Hot surfaces may cause burns; avoid direct skin contact during operation. Keep furniture, bedding, paper, curtains, and other combustible materials at least 1 meter (approximately 3.3 feet) from the heater, and follow all additional clearances in the user manual. For indoor use only.
• One-Year Limited Warranty — Includes a one-year limited warranty from the purchase date for the original purchaser and original product, subject to the terms and exclusions in the user manual. Retain your proof of purchase and contact customer support for assistance with operation or warranty service.