Door Window Awning Made of 0.137 Inch Thick Crystal Solid Polycarbonate Sheet and Aluminum Alloywith Valance for Wooden Wall House

Features

• 【HEAT RESISTANT ABILITY】The polycarbonate sheet is able to work normally in the temperature range from -40~248℉(-40~120℃).
• 【Valance Included】6"/15cm high polyester valance with PU coating equipped for protecting your eyes from sunshine,dust,wind and rain drops; Valance is a standard part with UPF50+ Ultraviolet ray protection . Users needn't install it if don't like it.
• 【THREE MOUNTING SPOTS】Each bracket is mounted on the wall by three pieces 304 stainless steel. Compared with other similar products mounted in 2 pieces bolts, it's much more stable and not easy to be pulled out of the wall when heavy snow loaded. All screws are test by "INTERTEK" proving won't be rusty at least in 10 years.
• 【HEAVY-DUTY BRACKETS】The brackets of awning are made of die-cut 1061 engineered Aluminum with hardness processing and oxidation finishing. The material are rust resistant and capable of providing strong, durable supporting for the awning against heavy snow and strong breeze.
• 【PREMIUM QUALITY SOLID POLYCARBONATE ROOF】GarLUGH DA4734C Series door window awning canopy uses 0.137"/3.5mm thick virtually solid polycarbonate panel with UPF80+ Ultraviolet ray protection. The awning was tested independently proving to be capable of affording the loading over 350lbs. DA4734 series are only for masonry concrete wall house.