Multicolor & Yellow Switch Plates

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

Anonymous. Sat Aug 08 2026

To make a wall plate, two pieces of glass are cut, cleaned, stacked together and placed into a kiln. The kiln goes up to 1450°f, the glass becomes molten and fuses together to make one piece of glass. The glass goes to a water jet and the plate is cut out. Then, the glass is placed onto a mold and taken to 1300°f, the glass becomes elastic and gravity pulls the glass over the mold. Hot knobs call this process slumping. The glass spends about 48 hours in the kilns. Expect slight variations in color and size.

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Maureen. Maryland City, MD. Sun May 15 2022

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Love it.. Anonymous. Sat Aug 01 2026

To make a Wall Plates, two pieces of glass are cut, cleaned, stacked together and placed into a kiln. The kiln goes up to 1450°f, the glass becomes molten and fuses together to make one piece of glass. The glass goes to a waterjet and the plate is cut out. Then, the glass is placed onto a mold and taken to 1300°f, the glass becomes elastic and gravity pulls the glass over the mold. Hot Knobs call this process slumping. The glass spends about 48 hours in the kilns. Expect slight variations in color and size.

Printed stainless steel metal plate with screws only. (Electrical components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Perfect match to my wall!. Anonymous. Tue Jun 24 2025

Printed stainless steel metal plate with screws only. (Electrical components are omitted) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Awesome. Fast delivery. Just like picture. Tiffany. Tue Apr 02 2024

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

So cute. Just what I was looking for for my coral colored walls in my powder room. I'm also going to purchase the double light switch and the single outlet plate to have everything in the room match.. Bonnie. Mount Joy, PA. Fri Sep 18 2026

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

To make a wall plate, two pieces of glass are cut, cleaned, stacked together and placed into a kiln. The kiln goes up to 1450°f, the glass becomes molten and fuses together to make one piece of glass. The glass goes to a waterjet and the plate is cut out. Then, the glass is placed onto a mold and taken to 1300°f, the glass becomes elastic and gravity pulls the glass over the mold. Hot knobs call this process slumping. The glass spends about 48 hours in the kilns. Expect slight variations in color and size.

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

Look it. Gonna be buying more. Adds a homey touch.. Maureen. Cooper City, FL. Thu Sep 24 2026

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Attractive. Metal. A bright splash of color.. Joyce. San Francisco, CA. Tue Mar 26 2024

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. Electrical components are not included. Plates are printed with 3 layers of hard ink with UV treatment.

Love the vibrant colors for my hallway. Kay. Michigan City, IN. Fri Feb 06 2026

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

Super cute. Adds a bit of whimsy and character to my old farmhouse. Kaitlyn. NH. Thu Jun 25 2026

To make a Wall Plates, two pieces of glass are cut, cleaned, stacked together, and placed into a kiln. The kiln goes up to 1450°f, the glass becomes molten and fuses together to make one piece of glass. The glass goes to a waterjet and the plate is cut out. Then, the glass is placed onto a mold and taken to 1300°f, the glass becomes elastic and gravity pulls the glass over the mold. Hot Knobs call this process slumping. The glass spends about 48 hours in the kilns. Expect slight variations in color and size.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Good quality switch plate. Nice and colorful, paint does not chip off and durable metal. Comes with screws needed.. Lori. Saginaw, MI. Wed May 15 2024

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

I bought this metal light switch plate cover to replace a basic plastic one, and it completely transformed the wall. The metal has a beautiful weight and a refined finish that catches the light just enough to look intentional without being flashy.. Denise. Clarksville, TN. Thu Sep 24 2026

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Great!. Linda Louise. North Las Vegas, NV. Sun Feb 11 2024

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Loved it!. Christene. Sierra Vista, AZ. Thu Jan 12 2023

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Unique and perfect for my downstairs half bath. Adds personality and upscales the bathroom decor without taking up space. Diana. US. Sat Jan 03 2026

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Such a pretty thing. When details matter, this is a lovely touch.. Veekayzed. Brooklyn, NY. Tue Mar 21 2023

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

The theme in my kitchen is sunflowers. You can never have enough sunflowers in your kitchen! These blend beautifully with the decor and look so bright and pretty replacing my old boring black switchplates.. Cher. Santee, CA. Thu Apr 30 2026

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.