Blush & Yellow Switch Plates

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Prefect and its metal not plastic. Melissa. Whitwell, TN. Fri Apr 17 2026

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Love these metal not plastic. Melissa. Whitwell, TN. Fri Apr 17 2026

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Beautiful well made. Packaged to prevent damage. Highly recommend. Attempted 3 times to upload photos and kept getting error message. I am ordering more now for other rooms.. Lisa. Missouri. Thu Sep 17 2026

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

To make a wall plate, two pieces of glass are cut, cleaned, stacked together and placed into a kiln. The kiln goes up to 1450°f, the glass becomes molten and fuses together to make one piece of glass. The glass goes to a water jet and the plate is cut out. Then, the glass is placed onto a mold and taken to 1300°f, the glass becomes elastic and gravity pulls the glass over the mold. Hot knobs call this process slumping. The glass spends about 48 hours in the kilns. Expect slight variations in color and size.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Maureen. Maryland City, MD. Sun May 15 2022

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Love it. Blends perfectly with wall color. Mamie. Camden, NJ. Fri Oct 04 2024

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

Anonymous. Sat Aug 08 2026

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Love the whitegrey marble-look wall plates! I have a whitegrey granite countertop backsplash done in a recent kitchen remodel. We didn’t think to relocate the electrical outlets to a less obvious location nearer to the countertop. These wall plates blend in so well with the granite material that they almost disappear from the backsplash. I’m very pleased. I do still need one double style (2 gang) wall plate that I didn’t find available here one side a CFC rectangle the other side a double electrical outlet…Maybe you do have this type available Many Thanks!. Maryjane. CO. Wed May 08 2024

To make a Wall Plates, two pieces of glass are cut, cleaned, stacked together and placed into a kiln. The kiln goes up to 1450°f, the glass becomes molten and fuses together to make one piece of glass. The glass goes to a waterjet and the plate is cut out. Then, the glass is placed onto a mold and taken to 1300°f, the glass becomes elastic and gravity pulls the glass over the mold. Hot Knobs call this process slumping. The glass spends about 48 hours in the kilns. Expect slight variations in color and size.

Printed stainless steel metal plate with screws only. (Electrical components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Perfect match to my wall!. Anonymous. Tue Jun 24 2025

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

To make a wall plate, two pieces of glass are cut, cleaned, stacked together and placed into a kiln. The kiln goes up to 1450°f, the glass becomes molten and fuses together to make one piece of glass. The glass goes to a waterjet and the plate is cut out. Then, the glass is placed onto a mold and taken to 1300°f, the glass becomes elastic and gravity pulls the glass over the mold. Hot knobs call this process slumping. The glass spends about 48 hours in the kilns. Expect slight variations in color and size.

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Love them! They really pop! The screw color options were a nice touch.. Cait. Lawrence, KS. Tue Sep 09 2025

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Beautiful. It is such a lovely piece. I highly recommend this vendor and this pattern.. Anonymous. Tue Jan 04 2022

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Good quality switch plate. Nice and colorful, paint does not chip off and durable metal. Comes with screws needed.. Lori. Saginaw, MI. Wed May 15 2024

To make a Wall Plates, two pieces of glass are cut, cleaned, stacked together, and placed into a kiln. The kiln goes up to 1450°f, the glass becomes molten and fuses together to make one piece of glass. The glass goes to a waterjet and the plate is cut out. Then, the glass is placed onto a mold and taken to 1300°f, the glass becomes elastic and gravity pulls the glass over the mold. Hot Knobs call this process slumping. The glass spends about 48 hours in the kilns. Expect slight variations in color and size.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

It matches the marble in our bathroom that I want to paint pink! Very inspiring.. Lori. Portsmouth, RI. Sun Oct 24 2021

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Very nice decor. Ana. San Gabriel, CA. Wed Aug 16 2023

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Gina. US. Fri Apr 25 2025

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

To make a wall plate, two pieces of glass are cut, cleaned, stacked together, and placed into a kiln. The kiln goes up to 1450°f, the glass becomes molten and fuses together to make one piece of glass. The glass goes to a water jet and the plate is cut out. Then, the glass is placed onto a mold and taken to 1300°f, the glass becomes elastic and gravity pulls the glass over the mold. Hot knobs call this process slumping. The glass spends about 48 hours in the kilns. Expect slight variations in color and size.

Beautiful ! Very classy looking.. Amy. Merced, CA. Fri May 05 2023

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

It's smallish and not quite what I was hoping/really just looks like it came out of printer. It's not defective or unusable, but I would not recommend - especially for the price.. Devora. Medford, OR. Thu Oct 02 2025

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

This is very beautiful. I love sunflowers.. Lorie. Milton, VT. Fri Aug 08 2025

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Great!. Linda Louise. North Las Vegas, NV. Sun Feb 11 2024

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only (electrical components are not included). The plates are printed with 3 layers of hard ink with UV treatment.

Killer - exactly what I needed!. Cait. Lawrence, KS. Tue Sep 09 2025

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.