Aqua & Cherry Switch Plates

To make a wall plate, two pieces of glass are cut, cleaned, stacked together, and placed into a kiln. The kiln goes up to 1450°f, the glass becomes molten and fuses together to make one piece of glass. The glass goes to a water jet and the plate is cut out. Then, the glass is placed onto a mold and taken to 1300°f, the glass becomes elastic and gravity pulls the glass over the mold. Hot knobs call this process slumping. The glass spends about 48 hours in the kilns. Expect slight variations in color and size.

Great colors and the glass is sturdy.. Presentacion. Fresno, CA. Thu Jan 18 2018

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Maureen. Maryland City, MD. Sun May 15 2022

Printed stainless steel metal plate with screws only. (Electrical components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Beautiful and well made but unfortunately the backsplash color u chose did not end up matching these.. Laura. Mon Aug 10 2026

Printed stainless steel metal plate with screws only. (Electrical components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Stephanie. Oxford, MI. Tue Feb 03 2026

To make a wall plate, two pieces of glass are cut, cleaned, stacked together and placed into a kiln. The kiln goes up to 1450°f, the glass becomes molten and fuses together to make one piece of glass. The glass goes to a water jet and the plate is cut out. Then, the glass is placed onto a mold and taken to 1300°f, the glass becomes elastic and gravity pulls the glass over the mold. Hot knobs call this process slumping. The glass spends about 48 hours in the kilns. Expect slight variations in color and size.

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Beautiful. It is such a lovely piece. I highly recommend this vendor and this pattern.. Anonymous. Tue Jan 04 2022

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Love it.. Sherry. Columbus, OH. Mon Jun 01 2026

To make a wall plate, two pieces of glass are cut, cleaned, stacked together and placed into a kiln. The kiln goes up to 1450°f, the glass becomes molten and fuses together to make one piece of glass. The glass goes to a water jet and the plate is cut out. Then, the glass is placed onto a mold and taken to 1300°f, the glass becomes elastic and gravity pulls the glass over the mold. Hot knobs call this process slumping. The glass spends about 48 hours in the kilns. Expect slight variations in color and size.

Just what I need and it's very classy.. Marion. Riverside, CA. Fri Oct 05 2018

These Southwestern Desert Cactus Arizona Wall Electrical Cover Plates each measures 4.75" High,3.25" Wide and 0.25" thick approximately. They fit standard wall receptacles. Each plate weighs about 3 ounces.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

These are really pretty. The color turned out to be as pictured. I love it!. Jolie M. Millington, TN. Sat Jul 02 2022

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

too cute!!!. Anonymous. Fri Sep 04 2026

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

To make a wall plate, two pieces of glass are cut, cleaned, stacked together and placed into a kiln. The kiln goes up to 1450°f, the glass becomes molten and fuses together to make one piece of glass. The glass goes to a water jet and the plate is cut out. Then, the glass is placed onto a mold and taken to 1300°f, the glass becomes elastic and gravity pulls the glass over the mold. Hot knobs call this process slumping. The glass spends about 48 hours in the kilns. Expect slight variations in color and size.

Love it. Anonymous. Bronx, NY. Fri Dec 16 2016

Printed stainless steel metal plate with screws only. Electrical components are not included. Plates are printed with 3 layers of hard ink with UV treatment.

As pictured. Dr. Stephanie. Thomaston, GA. Mon Oct 06 2025

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Anonymous. Sun Sep 22 2024

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

To make a Wall plate, two pieces of glass are cut, cleaned, stacked together, and placed into a kiln. The kiln goes up to 1450°f, the glass becomes molten and fuses together to make one piece of glass. The glass goes to a waterjet and the plate is cut out. Then, the glass is placed onto a mold and taken to 1300°f, the glass becomes elastic and gravity pulls the glass over the mold. Hot Knobs call this process slumping. The glass spends about 48 hours in the kilns. Expect slight variations in color and size.

I ended up with these cover plates everywhere on our first floor ~ we have all white walls, these pop beautifully. I LOVE THEM !!!. Tracey. Manasquan, NJ. Mon Dec 15 2025

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Not well made. Carolyn. Cleveland Heights, OH. Sat Apr 15 2023

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Anonymous. US. Sun Nov 07 2021

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

I love it. I already installed them. Haley. Sat Jul 20 2024

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Very nice color.. it’s a gift so haven’t installed it yet. Anonymous. Sat Jun 08 2024

Printed stainless steel metal plate with screws only. (Electrical components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Super Cute!. Quiana. Tue Jun 13 2023

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. Electrical components are not included. Plates are printed with 3 layers of hard ink with UV treatment.

Very cute. Dreama. Sebring, FL. Sat Apr 15 2023

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

i need the center part . please send them to me .please. Anonymous. Wed Apr 30 2025

This electrical switch cover is the perfect blend of functionality and aesthetics for your home or office. This unique outlet cover not only adds a touch of rustic charm but also ensures the safety and durability you need in a power outlet cover. Upgrade your home décor and experience the perfect fusion of style and practicality. Transform your living space into a haven of creativity and inspiration with this light switch cover.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only (electrical components are not included). Plates are printed with 3 layers of hard ink with UV treatment.

Looks exactly like the photo. Susan. FL. Sun Sep 24 2023

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

Metal Light Switch Plate Content: 1 Printed Stainless Steel Flat Metal Plate with Screws only. (Electrical Components are not included) All images are high resolution and rich in color. Plates are printed with 3 layers of hard ink and UV treatment. US Standard Metal Plate sizes: Single: 2.75 inch x 4.5 inch. Doubles: 4.56 inch x 4.5 inch. Triples: 6.38 inch x 4.5 inch. Quads: 8.20 inch x 4.5 inch.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment. - UV cured, eggshell finish for a smooth feel. - 2 Gang double duplex - standard size. - Home décor scratch-resistant stainless steel wall plate

Printed stainless steel metal plate with screws only. (Electrical Components are not included) Plates are printed with 3 layers of hard ink with UV treatment.