Recessed Lighting Housings Under $25

Globe Electric's 4-pack Mishra Swivel Round 3" Recessed Lighting Kit with oil-rubbed bronze finish is the perfect way to brighten up the interior of your home or commerce with style. It features patented Push-N-Click clips that are fully adjustable and extra wide to grip uneven surfaces and provide easy tool-free installation. A swivel light bulb gives you the ability to focus light on specific areas and can be directed for any desired look. An integrated cut-off switch ensures that the fixture will not overheat and can be used with or without an insulation box. Requires four 50-watt equivalent GU10 MR16 light bulbs. Dimmable with a compatible dimmer switch not included. Cut a 3.25-inch hole for this item.

Super easy to install and work great.. Debi. Earlham, IA. Fri Feb 08 2019

Designed for sleek functionality, this 4-inch square gimbal trim delivers flexible directional lighting in a minimal black finish. The vertically adjustable gimbal (0° to 30°) allows you to aim the light precisely where needed, making it ideal for highlighting features or focused task lighting. Constructed from durable stamped metal, it supports rear re-lamping and fits standard 4-inch housings (sold separately). This trim is a smart, subtle choice for both residential and commercial recessed lighting setups.

The 608-SH/408-SH IC type shallow can housings is designed for both ceiling joists installations and drop ceiling (with T-bar grid) installations. It can be completely covered by thermal insulation. Also, the fixture may direct contact with any combustible material like ceiling joist or floor board safely. The 608-SH/408-SH is a Title 24 compliant, no screw based socket or other mediumbased incandescent socket adapters are needed.Tihs new construction housing compatible with MW 6 inch retrofit downlight with smooth trim (SKU:LZMJ1023) and MW 6 inch retrofit downlight with baffle trim（SKU:LZMJ1041）

Bruce. Terre Haute, IN. Tue Nov 14 2023

These galvanized steel mounting plates are designed specifically for 4-inch LED recessed lights, making them ideal for new construction, remodeling, and post-drywall projects in both homes and businesses. Their lightweight 0.6mm profile and rust-resistant galvanized finish provide a sturdy, long-lasting base for wafer lights, gimbal LEDs, and standard recessed fixtures. The pre-cut 4.25-inch symmetrical center hole ensures a precise fit, while alignment notches and mounting points simplify installation and save time. Suitable for living rooms, kitchens, basements, garages, and more, these plates are a reliable choice for electricians, contractors.

Designed for 4-inch LED recessed downlights, these new construction mounting plates provide a reliable solution for new build and remodeling projects. Made of premium corrosion-resistant cast iron, they boast outstanding durability and low long-term maintenance costs. Each plate comes with a precision-cut 4.25-inch center opening and built-in alignment notches for accurate positioning and perfect fit with standard recessed fixtures; adjustable slotted tracks work with wood joists, metal studs and various ceiling framing systems, and the slim low-profile design fits easily in shallow ceiling spaces. With all mounting holes pre-punched for effortless installation, they streamline drywall cutting and fixture positioning to save time for contractors, electricians and DIY users, delivering a sturdy and secure base for recessed lighting setups.

The 4 Inch IC Type New Construction Shallow Housing is designed for both ceiling joists installations and drop ceiling (with T-bar grid) installations. It can be completely covered by thermal insulation. Also, the fixture may direct contact with any combustible material like ceiling joist or floor board safely. The new construction can light housing is a Title 24 compliant, no screw based socket or other medium-based incandescent socket adapters are needed.

【2.95 X 2.56 X 0.75 inch Battery Holder】This battery holder measures 75 x 65 x 19MM (2.95 x 2.56 x 0.75 inches) and weighs only 38g (approximately 0.08 lbs). Lightweight and portable, it is easy to install and ideal for a variety of applications【Durable HIPS Material】Made from high-strength HIPS material and quality electronic components, this case is flame-retardant, heat-resistant, and deformation-resistant. It offers excellent shock absorption, scratch resistance, and impact protection for your batteries【Holds 4 x 1.5V AA Batteries】Designed to hold 4 pieces of 1.5V AA batteries, this case features a sleek, clean design with a secure snap-lock mechanism. Easy to open and close, it ensures a firm fit even with frequent use, offering both safety and convenience【Wide Application】This battery case can be used both for battery storage and as a power supply component for various devices. Suitable for circuit boards, electric toys, digital cameras, electronic calendars, and other electronics requiring AA battery power【Safe and Reliable Power Supply】With excellent conductivity, this battery holder ensures stable power delivery for your devices. It is a practical power solution for industrial, electronic, and DIY projects, as well as everyday use【Product Video】Video Instructions link: You can search "18612 battery housing 6v 4 aa batteries external power source usb a fixturedisplays" on youtube to locate the video.

These galvanized steel mounting plates are designed specifically for 4-inch LED recessed lights, making them ideal for new construction, remodeling, and post-drywall projects in both homes and businesses. Their lightweight 0.6mm profile and rust-resistant galvanized finish provide a sturdy, long-lasting base for wafer lights, gimbal LEDs, and standard recessed fixtures. The pre-cut 4.25-inch symmetrical center hole ensures a precise fit, while alignment notches and mounting points simplify installation and save time. Suitable for living rooms, kitchens, basements, garages, and more, these plates are a reliable choice for electricians, contractors.

Mora. Suffolk, VA. Fri Feb 03 2017

Designed for 4-inch LED recessed downlights, these new construction mounting plates provide a reliable solution for new build and remodeling projects. Made of premium corrosion-resistant cast iron, they boast outstanding durability and low long-term maintenance costs. Each plate comes with a precision-cut 4.25-inch center opening and built-in alignment notches for accurate positioning and perfect fit with standard recessed fixtures; adjustable slotted tracks work with wood joists, metal studs and various ceiling framing systems, and the slim low-profile design fits easily in shallow ceiling spaces. With all mounting holes pre-punched for effortless installation, they streamline drywall cutting and fixture positioning to save time for contractors, electricians and DIY users, delivering a sturdy and secure base for recessed lighting setups.

Designed for 4-inch LED recessed downlights, these new construction mounting plates provide a reliable solution for new build and remodeling projects. Made of premium corrosion-resistant cast iron, they boast outstanding durability and low long-term maintenance costs. Each plate comes with a precision-cut 4.25-inch center opening and built-in alignment notches for accurate positioning and perfect fit with standard recessed fixtures; adjustable slotted tracks work with wood joists, metal studs and various ceiling framing systems, and the slim low-profile design fits easily in shallow ceiling spaces. With all mounting holes pre-punched for effortless installation, they streamline drywall cutting and fixture positioning to save time for contractors, electricians and DIY users, delivering a sturdy and secure base for recessed lighting setups.

The TR-P401-45 4-Inch Stepped Baffle Trim is a high-quality recessed light trim designed to reduce glare and improve light dispersion. This sleek trim features a stepped baffle design that helps soften and direct the light, minimizing eye strain. The full return with a gasket ensures a tight seal, preventing light leakage and enhancing overall energy efficiency. Ideal for use with 4-inch recessed housings (sold separately), this trim provides both functionality and style to any modern lighting setup.

Illuminate your space with Cleanlife canless LED recessed lights, designed for both style and functionality. Our sleek recessed downlights offer a minimalist aesthetic that seamlessly integrates into any home or office, making it perfect for kitchen ceiling light fixtures, hallways, and more. Brought to you by Cleanlife, the trusted choice for exceptional energy efficient lighting solutions.

Enhance the performance and appearance of your recessed lighting with the Stepped Baffle Trim. Designed for 3-inch housings (sold separately), this trim features a sleek satin nickel finish with a black baffle that minimizes glare while improving light dispersion. Ideal for residential or commercial applications, it blends functionality with subtle, modern styling.

Designers Fountain 6 in. LED recessed housings are specially designed for quick and easy installation during remodel construction projects. Each housing comes with a dedicated LED push-in connector system that provides high efficacy code compliance when used with qualified LED trims equipped with the same connector. The airtight design helps reduce heating and cooling costs by minimizing air flow through the ceiling. These recessed cans are IC rated, and they are pre-wired for easy installation.

[This review was collected as part of a promotion.] I received this from Influenster and I’m so excited that I did! I’m currently remodeling my entire home and this was a perfect addition! Easy to install and looks great!!. Arielb. Wed Dec 27 2023

Luxrite New Construction Mounting Plate fits 2 Inch, 3 Inch, and 4 Inch LED recessed lighting kits and is the perfect choice for new construction homes or house remodeling. Great when paired with ultra thin or slim recessed lights with junction box. Each mounting plate comes with 2 hanger bars which can extend from 13.75 inches to 25.88 inches and a plate that can slide along the bars from end to end. Made of durable metal and so you can be sure that your recessed lighting is secure. Model #: LR41001

Designed for 4-inch LED recessed downlights, these new construction mounting plates provide a reliable solution for new build and remodeling projects. Made of premium corrosion-resistant cast iron, they boast outstanding durability and low long-term maintenance costs. Each plate comes with a precision-cut 4.25-inch center opening and built-in alignment notches for accurate positioning and perfect fit with standard recessed fixtures; adjustable slotted tracks work with wood joists, metal studs and various ceiling framing systems, and the slim low-profile design fits easily in shallow ceiling spaces. With all mounting holes pre-punched for effortless installation, they streamline drywall cutting and fixture positioning to save time for contractors, electricians and DIY users, delivering a sturdy and secure base for recessed lighting setups.

Designed for optimal lighting performance, the recessed trim features a 4-inch baffled specular reflector in a clean white finish. Its fixed downlight configuration helps control light direction while reducing glare and eye strain. The internal specular baffle enhances light dispersion and interior brightness. Ideal for residential or commercial spaces, it comes with a full return and gasket to eliminate light leakage. Compatible with standard 4-inch recessed housings (sold separately).

Energetic Lighting’s E3DL (6”) beveled downlights are designed to easily upgrade your existing 4-inch recessed fixture affordably. The E3DL series provides the perfect blend of performance and reliability at an affordable value to the customer. The E3DL (6”) delivers a minimum of 1200 lumens of quality illumination while providing as much as 85% savings in energy consumption. Fixtures feature a white aluminum baffle with a recessed diffusing lens to conceal the LED array that provides a pixel free visual appearance. The integrated ezCCT field selectable CCTs (2700K, 3000K, 3500K, 4000K, 5000K) is standard in the E3DL series. This greatly helps to reduce SKU complexity while providing design flexibility for applications that may require multiple color temperatrues on the same project.

RP Lighting and Fan's Edge-lit Slim Recessed has a 4-inch lens, features 9 watts and 3000 color temperature. This recessed light provides 600 delivered lumens with a 90 CRI.

Single wall IC construction, for use in insulated ceilings. Housing meets restricted air flow requirement (per ASTM E-283). Has the ability to hold a 14W maximum 120V lamp and also comes with a 2-wire quick connect terminal connector for the lamp holder.

[This review was collected as part of a promotion.] This 5in LED remodel works perfect in my bathroom. I remodeled my bathroom it was easy to install. It has an airtight housing for use with Halo RL56 and RL7 LED retrofit remodels, and ML56 LED downlight system of LED light model and LED trims. The LED connection is non-screw base.. R0149. Las Vegas, NV. Mon Jan 16 2023

Luxrite New Construction Mounting Plate fits 2 Inch, 3 Inch, and 4 Inch LED recessed lighting kits and is the perfect choice for new construction homes or house remodeling. Great when paired with ultra thin or slim recessed lights with junction box. Each mounting plate comes with 2 hanger bars which can extend from 13.75 inches to 25.88 inches and a plate that can slide along the bars from end to end. Made of durable metal and so you can be sure that your recessed lighting is secure. Model #: LR41001

Luxrite New Construction Rough-In Mounting Plate fits 2 Inch, 3 Inch, 3.75 Inch, 4 Inch, 5 Inch, and 6 Inch LED recessed lighting kits and is the perfect choice for new construction homes, home remodeling, or commercial properties. Each mounting plate comes with alignment notches that can be installed to ceiling beams as close as 5.5 inches or as far as 25.19 inches. Made of durable galvanized steel which is rust and impact resistant, making it an ideal choice for all slim recessed lighting installations. Model #: LR41006

Elco offers housings and trims designed for use with high end LED lamps, providing an easy way to save energy on new construction or remodel projects. The remodel housing was designed for remodel installation and features a twist and lock socket for use with 120V GU-10 MR16 LED lamps.

Remodel housing for shower trim - bathroom remodel project. Sandra. Denver, CO. Tue Feb 25 2020

Elco Lighting's remodel housing was designed with an adjustable lamp holder and built with thermal protection.

Illuminate your space with Cleanlife canless LED recessed lights, designed for both style and functionality. Our sleek recessed downlights offer a minimalist aesthetic that seamlessly integrates into any home or office, making it perfect for kitchen ceiling light fixtures, hallways, and more. Brought to you by Cleanlife, the trusted choice for exceptional energy efficient lighting solutions.

Juno Canless New Construction Mounting Frame for 2in Wafer (WF2) and 2LED Series - round or square canless downlights. The 2NCMFLP pan can be used to locate your fixture in the ceiling for new construction applications. Pan is provided with adjustable bar hangers for use in either wood joist or suspended T-Grid ceilings.

Beautiful lights. Joyce. Sallisaw, OK. Sat May 12 2018

Single wall IC construction, for use in insulated ceilings. Housing meets restricted air flow requirement (per ASTM E-283). Has the ability to hold a 14W maximum 120V lamp and also comes with a 2-wire quick connect terminal connector for the lamp holder.

Juno 5" Universal Incandescent Recessed Housing is double-wall constructed and may be installed from below through a 5.5 hole. It can be completely covered with insulation and vertically adjusts to accommodate up to a 1-inch ceiling thickness. The Bar hangers may be repositioned 90 degrees. A thermal protector ensures automatic shutdown if improper bulb wattage is used. Meets Washington State IECC and MEC codes and conforms with City of Chicago IP requirements. UL listed.

Quick and easy to install and has a quality feel. It does require a hole larger than 5”. Be aware if are limited to that dimension. We did not have that restriction so this unit met our needs exactly.. Edward. Lakewood, WA. Mon Jun 15 2020

NICOR Lighting's 4" Line-Voltage Remodel Airtight is suitable for new construction in residential and commercial applications. Insulation must be kept at a minimum of 3” from housing.

The miniature housing features integral thermal protector guards against improper lamping and has a height that allows for use in construction. This product also features an adjustable socket bracket that allows for different lamp types and sizes for proper and consistent lamp positioning. A pre-wired junction box is provided with knockouts, with removable access plates; listed for through branch circuit wiring.

This 6 in. Recessed Housing is specially designed to be installed from below the ceiling in home remodel applications, ideal for those with limited or no access to above the ceiling. It is ideal for IC and non-IC new construction applications. Its gasketed Air-Tight housing restricts airflow from conditioned spaces into unconditioned attic space, preventing unnecessary HVAC costs and improving the overall home energy efficiency. The housing is constructed from die-formed corrosion resistant galvanized steel. An integral flange and locking springs create a snug fit against the ceiling, permitting quick mounting in 1/2 in. to 1-1/2 in. thick ceilings. It features a universal J-box with snap-out sides. Wiring is made easy with the included wiring quick-connects that allow simple installation of 12-20 AWG wire without using separate wire nuts - simply strip supply wires and push in. It is UL and CUL listed for damp locations and is thermally protected against improper use of lamps.

IC airtight universal housing with a height which allows for use in construction. Has the ability to go with a lamp up to 90W maximum, for direct contact with ceiling insulation. Has integral thermal protector guards against improper lamping and also has an adjustable socket bracket that allows for different lamp types/sizesand proper andconsistent lamp positioning. Junction box is listedfor though branch circuit wiring and has knockoutswith true pry-out slots.

This 4 in. small-aperture Air-Tight Non-IC New Construction Housing provides accent and task lighting for new construction applications and is ideal for those who have easy access above the ceiling. Use with a variety of trims and finishes to create different lighting effects or match any decor. Its gasketed air-tight lamp housing prevents conditioned air from escaping into the attic space, reducing unnecessary HVAC energy usage. The lamp housing compartment can be adjusted to fit ceiling thicknesses from in. to 1 in. The housing and frame are constructed from die-formed corrosion resistant galvanized steel. It features a universal J-box with snap-out sides and provided with push in connectors to make wiring quick and easy. Bar hangers have a maximum span of 24 in. and are scored in two locations for fast, clean breaking, allowing housing installation in very narrow joist spacings. Pre-installed framing nails on the bar hangers make installation quick and efficient. Hanger bars include t-bar mounting clamps for use in suspended t-grid ceilings. The integrated temperature sensor prevents lamp overheating, allowing this fixture to be used with a range of lamp shapes and wattages. It is UL and CUL listed for damp locations and Non-IC installation. The housing is compatible with a variety of trims and finishes to create different lighting effects or to easily match any decor.

IC Airtight Recessed Housing is suitable for residential or light commercial applications. For installation in insulated ceilings and non-insulated ceilings with airtight code compliant construction. Use with a variety of trims and finishes to create different lighting effects or to match any decor. Maybe retrofit with compatible Halo LED lighting systems.

This product was designed for single wall IC construction, for use in insulated ceilings. It has a height that allows for use in construction. Housing meets restricted air flow requirement (per ASTM E-283).

Enjoying my items very much from Wayfair. Thank you. Rasheia. Philadelphia, PA. Fri Aug 07 2020

Elco Lighting airtight IC shallow remodel housing is versatile, reliabe, and easy to install. It also features a ceiling opening with unit slips through ceiling cut out while integral flange secure fixtures against ceiling. This model also has the ability to hold a 75W max lamp and has integral thermal protector guards to prevent improper lamping. Lastly, this item also has adjustable socket brackets that allows for different lamp types and sizes for proper and consistent lamp positioning.

Patrick. Melrose, MA. Sat Aug 01 2020