277V Lighting Components

This class 2 and class P, UL and cUL listed enclosed electronic power supply is the perfect solution for wiring multiple low voltage fixtures. Class 2 power supplies are intrinsically safer because they are categorized to allow no greater than 5 amps of current to be drawn on each compartment. The enclosure cover is easy to remove. The power supply has knockouts on three sides with clips for line voltage wiring. Secondary wiring for class 2 power supplies does not require conduit-sheathed cable or clamp wiring techniques. This power supply has a low minimum load requirement of 6W to allow the use of LED products. May be dimmed using a TRIAC or electronic low-voltage dimmer.

The PP20 power pack switches the lighting load on and off utilizing our patented relay circuit protection

[This review was collected as part of a promotion.] This is a great product all around it's exactly what I needed and was made well instructions were great and had no issues with installation. After installation I uncountered no problems it works as should nice and solid piece. Cassa. Minneapolis Minnesota. Thu, 11 Aug 2022

This class 2, UL & cUL wet location listed enclosed electronic power supply is used to power 24V outdoor tape light. Power supplies have male-to-female connectors on the low-voltage strip light side that can be tightened to create a secure water-tight connection. Power supplies are IP67 factory sealed for complete protection against ingress of dust and airborne particles with protection against water and liquids up to and including immersion in up to one meter of water for up to 30 minutes.

Concrete pour kit designed to be installed on a concrete surface to provide maximum stability for the WAC landscape chamber bollard. A Mid-century modern inspired design with solid casted aluminum that shelters an advanced LED light engine within the inner chamber to provide maintenance-free illumination for many years. The chamber features a collection of wet-location-listed wall sconces, pendants, and post lights for consistency in design throughout any project.

The IOTA ILB CP05 HE A constant power emergency LED driver enables the existing LED fixture to deliver emergency illumination for 90 minutes in the event of a loss of normal power. IOTA’s patented constant power design makes it easy to determine actual emergency lumen levels – simply multiply the emergency driver’s output wattage by your fixture’s ‘efficacy (ie. lumens per watt.). Includes single-piece test switch/charge indicator accessory. UL Listed for factory or field installation, Certified to CA Title 20, and registered in the California Modernized Appliance Efficiency Database (MAEDBS) as a small battery charger.

Concrete pour kit designed to be installed on a concrete surface to provide maximum stability for the WAC landscape scoop bollard. A sleek linear bollard design that blends seamlessly into pathways and perimeters while providing soft even illumination. Wash away outdoor darkness with this featured cylindrical light column to maximize nighttime visibility and safety.

The LEM08 emergency LED driver enables the lighting fixture to deliver a minimum of 90 minutes of illumination during a loss of normal AC power. It is UL listed for factory or field installation with indoor, damp location luminaries utilizing 20-50VDC output voltage. When normal AC power fails, the LEM08 immediately drives the LED load at the reduced light output for a minimum of 90 minutes. When AC power is present, the emergency LED driver ensures the sealed, maintenance-free, high-temperature nickel-cadmium batteries are fully charged within 24 hours after a discharge and remains fully charged until the next loss of AC power. The included test switch/pilot light provides visual and manual means of monitoring the system operation.

Fixed-position photocell allows the luminaire to automatically be lit in the absence of daylight. Works with 120/277V or 120V. For automatic dusk to dawn lighting.

The LSXR 610 fixture mount occupancy sensor provides reliable and versatile solutions for commercial and industrial lighting control applications

Show your love for the game with this Soccer Ball themed fan pull. Your guests will know you are a true Soccer fan when they notice your new soccer ball hanging from your favorite ceiling fan. A new ceiling fan pull is the perfect way to personalize your ceiling fan. All Home Concept fan pulls have a protective lacquer coating to prevent tarnishing or discoloration. Fan pull has a beaded metal chain, compatible with most ceiling fans. Fan pull measures 2 1/4" Height and 1 2/3" width with 12" chain. Material: Antiqued Brass finish.

Show your love for the game with this Tennis themed lamp finial. Your guests will know you are a true tennis fan when they notice your new yellow finial sitting atop your favorite lamp. A new lamp finial is the perfect way to complete your new or favorite lamp. All Home Concept finials have a protective lacquer coating to prevent tarnishing or discoloration. Finial has a standard 1/4"-27 thread, which will fit the harp on almost every lamp. (This means the opening is 1/4" wide and there are 27 threads per inch.) 95% of all lamp harps will fit this finial. Finial measures 2 1/4" Height and 1 2/3" width. Material: Antiqued Brass finish

Install 2×4 LED panel lights in spaces where recessed or drop-ceiling installation is not available with this 2×4 surface mount kit. Designed to create a clean, professional ceiling-mounted look, this frame provides a practical solution for offices, retail spaces, utility rooms, corridors, classrooms, and other commercial or residential interiors. This surface mounting kit is made for compatible 2×4 LED backlit panels and helps convert flat ceilings into a finished panel lighting installation. The low-profile frame keeps the appearance sleek and modern while supporting a secure surface mount setup. LED panel light is sold separately. Built with extruded aluminum construction and a white powder-coated finish, the kit is lightweight, durable, and designed to blend with standard white LED panels. The anti-rust surface and smooth corners help provide a clean installation while maintaining a polished ceiling appearance. The screw-together frame design makes assembly straightforward for installers. Simply assemble the frame pieces, secure the kit to the ceiling, connect the LED panel wiring according to the fixture instructions, slide the panel into the frame, and close the final side for a complete surface mount installation.

In public places, what should you do if the power goes off suddenly? This time if there is an emergency power supply installed in the lamps, there will be no panic and confusion caused by sudden power outages. Then this LED emergency backup battery driver is your best choice. Pressing the test switch turns off the light and forces the unit into emergency mode, interrupting power to the designated ac driver. After releasing the test switch, the fixture returns to normal operation after a momentary delay. This driver is not suitable for a damp location, please use it in the room.

In the event of a power failure, this installed LED emergency battery backup switches to emergency mode and operates the lights of the fixture for about 90 minutes. Pressing the test switch turns off the light and forces the unit into emergency mode, interrupting power to the designated ac driver. After releasing the test switch, the fixture returns to normal operation after a momentary delay. This driver is not suitable for a damp location, please use it in the room.

Upgrade existing fluorescent lighting fixtures with the E2 Lighting 4 ft Magnetic LED Retrofit Strip Kit, 5 Pack, designed to provide an energy-efficient lighting solution for commercial renovations and lighting upgrades. Featuring a practical magnetic mounting design, these LED retrofit kits allow you to modernize compatible existing linear lighting fixtures while retaining suitable fixture housings. This convenient 5-pack includes five complete magnetic LED retrofit kits, each containing two 4-foot LED strips, for a total of ten LED strips. Each two-strip retrofit kit operates at a combined rated power of 40W, providing a total rated power of 200W when all five kits operate simultaneously. Designed for fluorescent-to-LED conversion projects, each magnetic LED retrofit kit features a magnetic mounting system for installation in compatible metal lighting housings. This design helps simplify the retrofit process, making it a practical solution for upgrading existing commercial lighting systems without replacing suitable fixture housings. All ten magnetic LED light strips feature a fixed 4000K Cool White color temperature, delivering consistent illumination and a uniform lighting appearance across multiple fixtures. The balanced cool-white lighting is suitable for offices, warehouses, workshops, garages, utility rooms, and other indoor commercial environments. Operating on AC 100-277V, these 4 ft LED retrofit kits are designed for use with compatible commercial and resident

The LEM04 emergency LED driver enables the lighting fixture to deliver a minimum of 90 minutes of illumination during a loss of normal AC power. It is UL Listed for factory or field installation with indoor, damp location luminaires utilizing 20-50VDC output voltage.