24V Transformers

60

Experience smooth, flicker-free brightness control of LED lighting with WaveLine Power 24-volt dimmable transformers. The low voltage AC to DC LED power supply converts standard 120V AC input into stable, low-voltage DC output for 24V LED strip lights, tape lights, puck lights, under cabinet lighting, and other low-voltage LED fixtures. Compatible with TRIAC (forward phase) dimming and most AC wall dimmer switches, this LED driver delivers consistent performance, dependable quality, and exceptional value. WaveLine power supplies are ideal for residential and commercial installations for dependable low-voltage power and consistent dimming.

Arrived very quickly. Great quality. Purchasing. New York, NY. Mon May 18 2026

150

The 24-Volt Universal+ Dimming LED Power Supply features a high power factor and works equally well with TRIAC forward phase and ELV reverse phase dimming. The compact and lightweight driver delivers smooth, flicker-free dimming from 0-100% with no pop-on or pop-off. With a power factor or 0.95+, the highly efficient dimmable driver meets most state regulatory requirements. Ideal for new or upgrade undercabinet LED lighting projects. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations. Includes one power supply and one detachable AC power cord.

The 120 Watt; 24 Volt Universal Dimming LED Power Supply delivers stable and energy-efficient, low-voltage power to any LED lighting installation. The LED driver is designed using high-performance, professional grade electronics that provide stable 0 or 100% dimming free of any “pop-on” or “pop-off”. The power supply is rated up to 120-watts at 24-volts. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Suitable for both dry and wet locations. Includes: One 120W, 24V LED Power Supply.

Works great. One of the only places I could find to buy this. Everywhere else had to be special order and was a lot more money. Heather. Kingston, ON. Thu Mar 04 2021

96 Watt

This class 2, UL & cUL listed enclosed electronic transformer is the perfect solution for wiring multiple low voltage fixtures. Class 2 transformers are intrinsically safer transformers because they are compartmentalized to allow no greater than 5 amps of current to be drawn on each compartment. Enclosure cover is easy to remove. The transformer has knockouts on three sides with clips for line voltage wiring. Secondary wiring for class 2 transformers does not require conduit sheathed cable or clamp wiring techniques. This transformer has a low minimum load requirement of 1W to allow the use of LED products. Maybe dimmed using an electronic low voltage dimmer.

I did not install these as I will leave it up to my electrician! Will post a photo when it is complete. Cynthia. Fairburn, GA. Thu Apr 23 2020

This power supply box, dressed in a sleek graphite brown, isn’t just about functionality—it’s about creating the perfect atmosphere. With 10 connections for a maximum of 96W, it powers your vision, whether you're lighting up a room or setting the mood. The built-in potentiometer lets you dim with ease, giving you complete control over the ambiance. Pair it with the Birdie outdoor bollard for a perfect harmony of style and functionality, lighting up your outdoor spaces with a touch of sophistication. Together, they create an inviting, magical atmosphere that transforms every corner. Make every light, every connection, shine in unison.

This class 2, UL & cUL listed electronic transformer is the perfect solution for wiring multiple low voltage fixtures. Class 2 transformers are intrinsically safer transformers because they are compartmentalized to allow no greater than 5 amps of current to be drawn on each compartment. Secondary wiring for class 2 transformers does not require conduit sheathed cable or clamp wiring techniques. This transformer has a low minimum load requirement of 1W to allow the use of LED products. Maybe dimmed using an electronic low voltage dimmer.

I had an exterior LED light fixture that had an electronic transformer that failed. The number were not exactly the same on this replacement but the input and output specifications were the same. I received and installed it and everything is working perfectly.. Tim. Surrey, BC. Mon Mar 01 2021

60 Watt

Low voltage plug-in class 2 electronic transformer designed to be used as a plug-and-play style transformer. Contains an on/off toggle switch at the base and a 72" detachable cord with an open splice. Inherently protected and power limited, protecting the lighting system from both normal and abnormal short circuits. Built-in auto reset, soft start, short, and overload circuit protection features. The soft-start delayed start feature extends lamp life by delaying the abrupt inrush current to the lamp. Ideal for WAC Lighting under cabinet systems.

Easy and convenient LED light system for kitchen under cabinet light. Ung. Hastings On Hudson, NY. Tue Mar 07 2017

This class 2, UL & cUL listed enclosed electronic transformer is the perfect solution for wiring multiple low voltage fixtures. Class 2 transformers are intrinsically safer transformers because they are compartmentalized to allow no greater than 5 amps of current to be drawn on each compartment. Enclosure cover is easy to remove. The transformer has knockouts on three sides with clips for line voltage wiring. Secondary wiring for class 2 transformers does not require conduit sheathed cable or clamp wiring techniques. This transformer has a low minimum load requirement of 1W to allow the use of LED products. Maybe dimmed using an electronic low voltage dimmer.

I haven’t connected this to my outdoor lights yet, but am excited to light up my small walkway with much needed light!. Karen. Gladewater, TX. Wed Dec 18 2019

The Armacost Lighting 60-Watt; 24-Volt Universal Dimming LED Power Supply delivers stable and energy-efficient, low-voltage power to any LED lighting installation. The LED driver is designed using high-performance, professional grade electronics that provide stable 0 or 100% dimming free of any “pop-on”or “pop-off”. The power supply is rated up to 60-watts at 24-volts. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations. Includes: 1) 60W, 24V Power Supply, 1) Detachable AC Power Cord

Lisa. Kimball, MI. Sun Aug 21 2022

This compact, graphite brown connection box is the quiet force behind your outdoor lighting dreams. With 2 sockets and a maximum of 6W, it brings power to your design, effortlessly and securely. Crafted with precision, the box’s IP-65 rating ensures it stands up to the elements, allowing you to bring beauty and light to your outdoor spaces no matter the weather. Let this subtle yet reliable box be the foundation of your perfect evening, illuminating your surroundings with a soft, warm glow. It’s not just about power—it’s about creating the right mood, every time.

80

The Magnetix Collection is a seamless, built-in track system designed to integrate effortlessly into walls or ceilings. Its magnetic design allows lighting components to be placed anywhere along the track, offering flexible, modern illumination that adapts to your space.

22W

Black plugged in Led driver with constant voltage

This transformer is a class 2 low voltage electronic transformer designed to be used as an enclosed remote transformer for LED under cabinet tape light. This is a 277V option for use with 277V applications.

Faster Job Site Wiring This 24V 200W LEONLITE LED driver includes a junction box with a snap on terminal cover, seven knockouts, and four mounting tabs to speed up wiring and keep installations neat and efficient on job sites. Safety Rated with Built-in Protections The driver is UL, cUL, and FCC listed and meets Class P, SELV, and NEMA 4X requirements. Built in short circuit, overload, and over temperature protection help ensure reliable, code friendly operation. Five Way Dimming Flexibility Supports five dimming methods in one unit: Triac, 0-10V, 1-10V, PWM, and potentiometer, so it integrates easily into most control systems. The LEONLITE driver is compatible with Lutron and Leviton dimmers and many other popular brands. Adjustable Output and Flicker Free Performance The maximum output voltage is adjustable from 17V to 25V for fine tuning brightness and compensating for voltage drop over long runs. Smooth dimming from 1% to 100% is achieved without flicker. Dependable Guarantee Backed by a hassle free 3-year guarantee, providing solid after sales support and peace of mind for your projects. Specifications Wattage: 200W Input voltage: 110-277V Output voltage: 24V DC Dimming range: 1%-100% Waterproof rating: Wet location Working temp: -4°F-113°F Material: Aluminum alloy Maximum Load: 90%

Slim Profile for Hidden Installations This ultra-slim 24V LED driver is built for tight spaces like ceilings, baseboards, and recessed walls. Its low-profile housing lets installers tuck the power supply out of sight in display shelves, cabinet lighting, and commercial millwork so wiring stays hidden and the finished look stays clean. Broad Dimming Support for Fewer Headaches The power supply accepts TRIAC, ELV, 0-10V, 1-10V, PWM, and potentiometer dimming, simplifying dimmer selection across jobs and reducing site troubleshooting. Expect smooth, flicker-free dimming across systems, and broad compatibility with Lutron, Leviton, and other popular brands. Certified Safety Designed for demanding commercial use, the driver meets UL8750 and is ETL listed, with Class 2 and Class P ratings. Built-in short circuit, overheat, and overload protection help reduce jobsite risk and support code compliance in retail, office, and architectural lighting installations. Stable 24V Output Accepting 110–277V AC input, this constant voltage driver delivers regulated 24V DC with up to 90% load efficiency, maintaining brightness over long cable runs for signage, cove lighting, and other low voltage zones. Specifications Wattage: 60W Input voltage: 110-277V Output voltage: 24V DC Dimming range: 1%-100% Waterproof rating: Damp location Working temp: -4°F-113°F Material: Plastic Maximum Load: 90%

Faster Job Site Wiring This 24V 96W LEONLITE LED driver includes a junction box with a snap on terminal cover, seven knockouts, and four mounting tabs to speed up wiring and keep installations neat and efficient on job sites. Safety Rated with Built-in Protections The driver is UL, cUL, and FCC listed and meets Class 2, Class P, SELV, and NEMA 4X requirements. Built in short circuit, overload, and over temperature protection help ensure reliable, code friendly operation. Five Way Dimming Flexibility Supports five dimming methods in one unit: Triac, 0-10V, 1-10V, PWM, and potentiometer, so it integrates easily into most control systems. The LEONLITE driver is compatible with Lutron and Leviton dimmers and many other popular brands. Adjustable Output and Flicker Free Performance The maximum output voltage is adjustable from 17V to 25V for fine tuning brightness and compensating for voltage drop over long runs. Smooth dimming from 1% to 100% is achieved without flicker. Dependable Guarantee Backed by a hassle free 3-year guarantee, providing solid after sales support and peace of mind for your projects. Specifications Wattage: 96W Input voltage: 110-277V Output voltage: 24V DC Dimming range: 1%-100% Waterproof rating: Wet location Working temp: -4°F-113°F Material: Aluminum alloy Maximum Load: 90%

Slim Profile for Hidden Installations This ultra-slim 24V LED driver is built for tight spaces like ceilings, baseboards, and recessed walls. Its low-profile housing lets installers tuck the power supply out of sight in display shelves, cabinet lighting, and commercial millwork so wiring stays hidden and the finished look stays clean. Broad Dimming Support for Fewer Headaches The power supply accepts TRIAC, ELV, 0-10V, 1-10V, PWM, and potentiometer dimming, simplifying dimmer selection across jobs and reducing site troubleshooting. Expect smooth, flicker-free dimming across systems, and broad compatibility with Lutron, Leviton, and other popular brands. Certified Safety Designed for demanding commercial use, the driver meets UL8750 and is ETL listed, with Class P ratings. Built-in short circuit, overheat, and overload protection help reduce jobsite risk and support code compliance in retail, office, and architectural lighting installations. Stable 24V Output Accepting 110–277V AC input, this constant voltage driver delivers regulated 24V DC with up to 90% load efficiency, maintaining brightness over long cable runs for signage, cove lighting, and other low voltage zones. Specifications Wattage: 200W Input voltage: 110-277V Output voltage: 24V DC Dimming range: 1%-100% Waterproof rating: Damp location Working temp: -4°F-113°F Material: Plastic Maximum Load: 90%

Weatherproof Heavy Duty Build The driver is housed in an IP65 rated aluminum enclosure with NEMA 4X protection to block moisture, dust, and corrosion. The interior is fully potted for long term stability, making it ideal for patios, yards, and enclosed lightboxes that face harsh or damp conditions. Ultra Slim Fit for Narrow Spaces An ultra slim profile allows the power supply to slip into tight signage frames, lightboxes, and architectural fixtures where space is limited. It provides a clean, hidden installation option for installers who need a low profile solution. 5-in-1 Dimming Support This LEONLITE driver supports TRIAC, ELV, 0-10V, 1-10V, PWM, and potentiometer dimming for broad compatibility across systems. It works with Lutron dimmers and Leviton dimmers as well as other popular brands. Certified Safe and Stable Output ETL listed and tested to UL standards, the unit carries Class P ratings and includes overload, overheat, and short circuit protection to reduce site risk. The aluminum housing helps dissipate heat and delivers a consistent 24VDC output for long LED strip or signage runs. Specifications Wattage: 200W Input voltage: 110-277V Output voltage: 24V DC Dimming range: 1%-100% Waterproof rating: Wet location Working temp: -4°F-113°F Material: Aluminum alloy Maximum Load: 90%

Compatibility and Versatile Applications Our 24V 96W Magnetic LED Driver with Triac/MLV and ELV dimming delivers broad compatibility for residential projects. It powers 24V LED strip lights, LED bulbs, and other low voltage fixtures, and works seamlessly with most standard dimmer switches. The LEONLITE LED driver is compatible with Lutron dimmers and compatible with Leviton dimmers, as well as other popular brands. Installation Requirements and Notes Designed for straightforward installation, the driver includes clear wiring instructions to make setup simple. Not for surface mounting. Install only in an electrical box with a volume bigger than 20 cubic inches. Smooth Dimming Performance Experience stable, flicker free dimming from 1% to 100% for precise lighting control. Certifications Protections and Warranty This unit is UL, cUL, and FCC listed and carries Class 2, Class P and Type HL ratings. Built in protections guard against short circuit, overload, and over temperature conditions. Backed by a hassle free 3 year guarantee and attentive after sales support. Specifications Wattage: 96W Input voltage: 120V Output voltage: 24V DC Dimming range: 1%-100% Waterproof rating: Damp location Working temp: -4°F-113°F Material: Aluminum alloy Maximum Load: 90%

100W 24V Led Power Supply 100V-240V AC to 24V DC Converter Constant Voltage LED Transformer with 24V JST Ports, ETL Listed White Dimmable LED Driver 24V for LED Strip Lights and Cabinet Lights…

48W

White plugged in Led driver with constant voltage

Product is definitely not as describe, it came without a power cord, and black not white. Antonio. US. Sat Sep 20 2025

Slim Profile for Hidden Installations This ultra-slim 24V LED driver is built for tight spaces like ceilings, baseboards, and recessed walls. Its low-profile housing lets installers tuck the power supply out of sight in display shelves, cabinet lighting, and commercial millwork so wiring stays hidden and the finished look stays clean. Broad Dimming Support for Fewer Headaches The power supply accepts TRIAC, ELV, 0-10V, 1-10V, PWM, and potentiometer dimming, simplifying dimmer selection across jobs and reducing site troubleshooting. Expect smooth, flicker-free dimming across systems, and broad compatibility with Lutron, Leviton, and other popular brands. Certified Safety Designed for demanding commercial use, the driver meets UL8750 and is ETL listed, with Class 2 and Class P ratings. Built-in short circuit, overheat, and overload protection help reduce jobsite risk and support code compliance in retail, office, and architectural lighting installations. Stable 24V Output Accepting 110–277V AC input, this constant voltage driver delivers regulated 24V DC with up to 90% load efficiency, maintaining brightness over long cable runs for signage, cove lighting, and other low voltage zones. Specifications Wattage: 96W Input voltage: 110-277V Output voltage: 24V DC Dimming range: 1%-100% Waterproof rating: Damp location Working temp: -4°F-113°F Material: Plastic Maximum Load: 90%

Weatherproof Heavy Duty Build The driver is housed in an IP65 rated aluminum enclosure with NEMA 4X protection to block moisture, dust, and corrosion. The interior is fully potted for long term stability, making it ideal for patios, yards, and enclosed lightboxes that face harsh or damp conditions. Ultra Slim Fit for Narrow Spaces An ultra slim profile allows the power supply to slip into tight signage frames, lightboxes, and architectural fixtures where space is limited. It provides a clean, hidden installation option for installers who need a low profile solution. 5-in-1 Dimming Support This LEONLITE driver supports TRIAC, ELV, 0-10V, 1-10V, PWM, and potentiometer dimming for broad compatibility across systems. It works with Lutron dimmers and Leviton dimmers as well as other popular brands. Certified Safe and Stable Output ETL listed and tested to UL standards, the unit carries Class 2 and Class P ratings and includes overload, overheat, and short circuit protection to reduce site risk. The aluminum housing helps dissipate heat and delivers a consistent 24VDC output for long LED strip or signage runs. Specifications Wattage: 96W Input voltage: 110-277V Output voltage: 24V DC Dimming range: 1%-100% Waterproof rating: Wet location Working temp: -4°F-113°F Material: Aluminum alloy Maximum Load: 90%

Dynamic Warmth With Flexible CCT Options This driver offers Dim To Warm performance plus 7CCT support, making it ideal for tunable LED strips. As you lower the dim level the light naturally shifts to a warmer tone, and the 7CCT capability lets you select precise color temperatures according to the LED strip specification. Speedy On Site Wiring Designed for fast installation, the included junction box features a snap on terminal cover, seven knockouts, and four mounting tabs so electricians can complete clean, efficient wiring and move through job sites more quickly. Certified Durability and Built In Protection This 24V 200W LED driver is UL, cUL, and FCC listed and is rated Class P, SELV, and NEMA 4X. It includes built in safeguards against short circuit, overload, and over temperature conditions to protect fixtures and installations. Five Way Dimming for Broad Compatibility Enjoy versatile control options with Triac / 0-10V / 1-10V / PWM / Potentiometer 5-in-1 dimming. The LEONLITE LED driver is compatible with Lutron and Leviton dimmers as well as many other popular brands, simplifying integration into existing control systems. Adjustable Voltage Output and Confident Warranty Easily fine tune brightness or compensate for voltage drop with the adjustable max output from 17V to 25V. For peace of mind the product is backed by a hassle free 3-year unlimited guarantee and responsive after sales support. Specifications Wattage: 200W Input voltage: 110-277V Output voltage: 24V DC CCT: 2700K-6500K Dimming range: 1%-100% Waterproof rating: Wet location Working temp: -4°F-113°F Material: Aluminum alloy Maximum Load: 90%

The Armacost Lighting Universal Dimming 24V LED Driver provides steady low voltage power to LED lighting installations. The energy-efficient LED power supply is designed using professional, high-performance components that provide stable 0% to 100% dimming free of any “pop-on” or “drop-off”. For the best results use with Armacost Lighting LED strip lights lights, puck lights, switches and dimming controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations.

Faster Job Site Wiring This 24V 60W LEONLITE LED driver includes a junction box with a snap on terminal cover, seven knockouts, and four mounting tabs to speed up wiring and keep installations neat and efficient on job sites. Safety Rated with Built-in Protections The driver is UL, cUL, and FCC listed and meets Class 2, Class P, SELV, and NEMA 4X requirements. Built in short circuit, overload, and over temperature protection help ensure reliable, code friendly operation. Five Way Dimming Flexibility Supports five dimming methods in one unit: Triac, 0-10V, 1-10V, PWM, and potentiometer, so it integrates easily into most control systems. The LEONLITE driver is compatible with Lutron and Leviton dimmers and many other popular brands. Adjustable Output and Flicker Free Performance The maximum output voltage is adjustable from 17V to 25V for fine tuning brightness and compensating for voltage drop over long runs. Smooth dimming from 1% to 100% is achieved without flicker. Dependable Guarantee Backed by a hassle free 3-year guarantee, providing solid after sales support and peace of mind for your projects. Specifications Wattage: 60W Input voltage: 110-277V Output voltage: 24V DC Dimming range: 1%-100% Waterproof rating: Wet location Working temp: -4°F-113°F Material: Aluminum alloy Maximum Load: 90%

Plug In Convenience A standard US plug lets this LED driver connect directly to 120V outlets—no hardwiring required—making installs fast and simple when in‑wall wiring is impractical. Perfect for under‑cabinet lighting, LED strips, DIY projects, and rapid commercial rollouts that need time‑saving solutions. Note: For 110–277V input, hardwiring is required. Ultra Slim Profile The ultra thin design fits where most drivers cannot, slipping neatly under cabinets, inside ceilings, or behind furniture panels for a clean, concealed look. It’s built for residential and commercial jobs where limited space and finished appearance matter. Broad Dimming Compatibility This plug‑in driver supports ELV, MLV, TRIAC, 0–10V, 1–10V, PWM, and potentiometer dimming—offering rare 5‑in‑1 dimming flexibility so one unit covers a wide range of systems and reduces the need for multiple driver models. Compatible with Lutron dimmers and compatible with Leviton dimmers as well as other popular brands. See attachment for specific models. Certified Safety ETL listed and compliant with UL8750, the driver carries Class 2 and Class P ratings and includes short‑circuit, overload, and thermal protection in a compact package. Specifications Wattage: 60W Input voltage: 110-277V Output voltage: 24V DC Dimming range: 1%-100% Waterproof rating: Dry Working temp: -4°F-113°F Material: Plastic Maximum Load: 90%

15

Armacost Lighting's 24 Volt Standard IP66 Waterproof LED Driver delivers stable and energy-efficient, low-voltage power to any LED light installation. The LED power supply is designed using high-performance, professional-grade electronics. No minimum load is required. The power supply must be hardwired. Rated for both indoor and outdoor use. For best results use Armacost Lighting LED lights.

Sharon. North Royalton, OH. Tue Aug 06 2024

12

The product delivers stable and energy-efficient, low-voltage power to any LED lighting installation. The constant voltage LED driver is designed using high-performance, professional-grade electronics that provide stable and efficient low-voltage power. The power supply is rated up to 12-watts at 12-volts. No minimum load required. Plug-in or hardwire with detachable AC power cord. Not compatible with 120V AC dimmers. For best results use Armacost Lighting LED products.

This is very helpful when using the motion sensing Led lights. I needed to have them extended to another piece of furniture and this was perfect!. Marguerite. Phoenix, MD. Tue Sep 05 2023

The Armacost Lighting 45 Watt; 24 Volt Universal Dimming LED Power Supply delivers stable and energy-efficient, low-voltage power to any LED lighting installation. The LED driver is designed using high-performance, professional grade electronics that provide stable 0 or 100% dimming free of any “pop-on” or “drop-off”. The power supply is rated up to 45-watts at 24-volts. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations. Includes: 1) 45W, 24V Power Supply, 1) Detachable AC Power Cord

30

The 24-Volt Universal+ Dimming LED Power Supply features a high power factor and works equally well with TRIAC forward phase and ELV reverse phase dimming. The compact and lightweight driver delivers smooth, flicker-free dimming from 0-100% with no pop-on or pop-off. With a power factor or 0.95+, the highly efficient dimmable driver meets most state regulatory requirements. Ideal for new or upgrade undercabinet LED lighting projects. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations. Includes one power supply and one detachable AC power cord.

The 24 Volt 60 Watt Potted LED Driver from Armacost Lighting features professional-grade, high-performance electronics that provide smooth, flicker-free 0% to 100% LED light dimming. The high power factor LED power supply delivers stable and energy-efficient dimming, low-voltage power to any LED light installation. Potted for insulation, the power supply cannot be removed from the enclosure. For the best results use Armacost Lighting LED lights, switches, and AC dimming LED light controls. Suitable for both dry and damp locations.

60W

This class 2, UL & cUL listed enclosed electronic transformer is the perfect solution for wiring multiple low voltage fixtures. Class 2 transformers are intrinsically safer transformers because they are compartmentalized to allow no greater than 5 amps of current to be drawn on each compartment. Enclosure cover is easy to remove. The transformer has knockouts on three sides with clips for line voltage wiring. Secondary wiring for class 2 transformers does not require conduit sheathed cable or clamp wiring techniques. This transformer has a low minimum load requirement of 1W to allow the use of LED products. Maybe dimmed using an electronic low voltage dimmer.

Transformer worked just as it should for our cabinet lights.. Michelle. Denver, CO. Sat Dec 30 2017

Use this transformer for all your power needs.

Platinum

The threaded male adapter used on Quick Connect™ fixtures makes inter-system compatibility a snap. Simply insert the metal getting into the appropriate system adapter, hand tightens the threaded collar, and you are done!

The Armacost Lighting’s 100 Watt; 24 Volt Standard LED Power Supply delivers stable and energy-efficient, low-voltage power to any LED lighting installation. The LED driver is designed using high-performance, professional grade electronics that provide stable and efficient low-voltage power. The power supply is rated up to 100-watts at 24-volts. No minimum load required. The power supply must be hardwired. Rated for both indoor and outdoor use. For best results use Armacost Lighting LED products.

Reggie. Nashville, TN. Sun Jul 23 2023