Sunlite 4' Fixture Component

About This Product

Upgrade your T8/T12 fluorescent bulbs with energy efficient LED plug and play bulbs, a direct replacement with no ballast bypass required. They are instant on at full brightness with no buzzing or flickering. With a life span of up to 50,000 hours you will be required to replace difficult to reach bulbs less often. You'll save maintenance costs and save energy at the same time. Can be used for both commercial and residential locations. They are DLC & UL Listed and unlike fluorescent tubes, they contain no harmful chemicals and do not require special handling or disposal.

Features

UPGRADE TO LED - Replace your inefficient T8 fluorescent bulbs with energy saving LED bulbs from Sunlite. They are instant on at full brightness with no buzzing or flickering. Glass outer tubes prevent yellowing and bending over time. Our wide 170 beam angle with frosted shatter resistant glass gives you great light coverage. High Color Rendering Index (CRI) rating of 82
PLUG AND PLAY - These bulbs are direct replacements for T8/T12 medium 2-pin base (G13) fluorescent tubes with no bypass required. For use with electronic ballasts only. You can find a complete list of compatible ballasts included in the pdf in this listing
ENERGY EFFICIENT - Each bulb puts out a bright 1800 lumens of light with a 4000K Super white color temperature while only using 12 watts of electricity. Annual energy costs are a low $1.44 (Based on 3 hours/day at $0.11/kWh)
LONG LIFE - With a life span of up to 50,000 hours you'll be required to replace difficult to access bulbs less often. You will save maintenance costs and save energy at the same time
DLC AND UL LISTED – These LED bulbs are UL Listed and have been tested to meet their rigorous safety standards. They are also DLC listed for quality and efficiency. And unlike fluorescent tubes, they contain no harmful chemicals and do not require special handling or disposal

Details

Product Type: Fixture Component
Integrated LED Wattage: 12 Watt
Integrated LED: Yes
Integrated LED Brightness (Lumens): 1,800lm
What is Integrated LED?: This indicates that an LED light is built into the fixture. Integrated LED lights are more energy efficient and can last up to 50,000 hours. They cannot be replaced by the customer.
Integrated LED Rated Lifespan: 50,000 hours
Bulb Not Included But Required: No
Maximum Wattage (Per Bulb): 12 Watt
Commercial Voltage Type: 277 Volts
Dry, Damp or Wet Location Rated: Damp
What is Dry, Damp or Wet Location Rated?: This indicates whether the fixture is safe to use in dry locations, damp locations (moist environments), or wet locations (direct exposure to water).
Power Source: Hardwired
Color / Finish: White
Bulb / Light Type: Integrated LED
Integrated LED Color Rendering Index (CRI): 82