Save on electricity and gain convenience with motion activated rechargeable LED lights. The Birch Harbor Motion Sensor LED Strip Light Kit comes with 3.3 feet of motion activated, energy-saving 3000K warm white LED strip lights powered by a long-living rechargeable battery pack. No need to worry about wiring, available outlets, or constantly replacing batteries: one full charge of the USB-C rechargeable battery can last up to 96 hours on Always-on Mode at 100% brightness. Motion activated lighting is ideal for indoor applications where temporary illumination is desired, such as nighttime or accent lighting in kitchens, bathrooms, bedrooms, hallways, closets, drawers, cabinets, and pantries. They can also be used in car trunks and for RV/camper lighting. LED strip lights can be set to be always-on, motion sensor mode, or off. The always-on feature allows you use the motion sensor lights wherever and whenever you need it for a long task daytime or night. Motion sensor mode will activate the light when motion is detected within 9 feet. Adjust the light time setting to automatically turn the light off after 15, 60, 120, 200, or 300 seconds with no movement. LED light brightness settings can be adjusted as needed. Day and night motion sensor settings allow you to switch between day mode (light will turn on when motion is sensed regardless of ambient light) and night mode (light will turn on when movement is sensed, and ambient light is low).