Step 1
Before use, please check whether the silicone at the bottom of the bowl is installed properly.
Step 2
Align the bowl with the groove of the Motor Base, place and secure it.
Step 3
Align the red dot on the filter with the red dot on the bowl, place and secure it.
Step 4
Place the squeezing auger vertically in the center of the filter and connect it with the motor shaft.
Step 5
Align the point at the "on" end of the filling tube with the red dot on the bowl, rotate clockwise until the point at the "OFF" end aligns with the red dot on the bowl, and the protruding part of the filling tube enters the slot. Otherwise, the machine will not function properly.
Step 6
Place the pulp cup and juice cup separately under the juice spout and pulp spout.
or
