Windsor Chair Replacement Legs Parts

When care needs change, the Windsor chair series is designed to prevent falls and reduce the physical demands of family members providing loved ones with mealtime assistance. MOBILITY: This chair features a SWIVEL SEAT which locks automatically (90 degrees L/R). With the seat turned away from the table and locked a person is able to be seated without any interference from the table. Once seated, the person is turned to face the table at which time the seat locks in place. The Swivel Release Lever is positioned in easy reach for either the seated person or the family care giver. "The WINDSOR Chair Series features a “farm house” design with a soft honey oak finish is sure to provide warmth within any kitchen. The WINDSOR Series….creating a SAFE and more ENJOYABLE mealtime routine!"

Kim. Glendale, AZ. Sun Mar 15 2026

Crafted from premium solid Eucalyptus wood, these furniture legs offer exceptional durability and a timeless espresso finish that complements any decor.

Sturdy, well-finished legs to elevate the look of your furniture. I used on an ottoman and I’m very happy with the outcome .. Anonymous. Fredericksburg, TX. Tue Aug 25 2026

These mounting plates can help strengthen and/or repair new or existing furniture by attaching them to the bottom of the furniture frame. The 5/16-18" bolts, pre-installed in our new furniture legs and feet, will fit perfectly into these top plates. Build, refinish, or update your tables, ottomans, sofas, seating, and more by installing mounting plates and screwing in new legs & feet. Convert European furniture to accept a standard 5/16-18" US hanger bolt by screwing the plates over the existing hole in the furniture. Update or refurbish your existing furniture pieces with our mounting plates and new line of furniture feet & legs.

Crafted from eco-friendly rubber wood, these solid wood furniture legs are durable and resistant to cracking. The tapered design and smooth finish in walnut-black or log stain add a touch of elegance to any piece of furniture.

Jillian. Greensboro, NC. Sat Aug 08 2026

Each furniture bun foot leg has passed a quality control process to ensure that you receive a product with superior craftsmanship. Thick slide on the bottom making it easier to move furniture around. Thread hanger bolt for fast and easy installation on furniture. The feet add a decorative accent to any furniture. They make an excellent choice to restoring and providing a different appearance to any furniture. To coordinate your desired finish, the bun feet are unfinished, smoothly sanded and ready for painting or staining. Each set of 4 comes with 4 free insert nuts and a drill bit.

Beautiful craftsmanship and quality. Was so excited to put them on my sofa. I didn't take before photos. Little pricey. If you purchase them. Wait for them to go on sale. I don't care for the look of them on my sofa. But I have other idea for them.. Lisa. Lewisberry, PA. Thu Mar 06 2025

This pack contains 4 round wood bun feet. Each furniture bun foot leg has passed a quality control process to ensure that you receive a product with superior craftsmanship. Architectural Products by Outwater's bun feet furniture legs come with a bottom felt making it easier to move furniture around. Most importantly, they have a pre-installed 5/16 in. - 18 in. thread hanger bolt for fast and easy installation on furniture. Bun's feet add a decorative accent to sofas, ottomans, cabinets, dressers, vanities, couches, armchairs, and more. They make an excellent choice to restore and provide a different appearance to your furniture.

I switched out my couch legs for these and it really gave it more modern feel! Great alternative instead of buying a whole new couch. Sabrina. Chula Vista, CA. Thu Mar 12 2026

10 sets of furniture connection accessories, each set includes a fitting cam lock nut, a positioning pin connecting rod bolt, and a pre-inserted nut. Holes and combination installation are based on the external dimensions of each component.

These are not exactly like the ones that came with the dresser that were missing out of the package. But they worked. I almost got my dresser finished put together . It’s very nice dresser it’s. Anonymous. Mon May 11 2026

Each furniture bun foot leg has passed a quality control process to ensure that you receive a product with superior craftsmanship. Architectural Products by Outwater's Bun feet furniture legs come with a bottom felt making it easier to move furniture around. Most importantly, they have a pre-installed 5/16 in. - 18 in. thread hanger bolt for fast and easy installation on furniture. Bun feet add a decorative accent to sofas, ottmans, cabinets, dressers, vanities, couches, arm chairs and more. They make an excellent choice to restoring and providing a different appearance to your furniture.

They are gorgeous and will transform my ottoman. Excellent product. Brenda. Tue May 26 2026

Each furniture Bun Foot leg has passed a quality control process to ensure that you receive a product with superior craftsmanship. American Pro Decor's Bun feet furniture legs come with a 1/4 in. Thick slide on the bottom making it easier to move furniture around. Most importantly, they have a pre-installed 5/16 in. - 18 in. thread hanger bolt for fast and easy installation on furniture. Bun feet add a decorative accent to any furniture. They make an excellent choice to restoring and providing a different appearance to any furniture. To coordinate your desired finish, our Bun feet are Unfinished, smoothly sanded and ready for painting or staining.

Raised my very modern desk to 30” we painted them black to match. Looks great. Bonnie. Reno, NV. Sat Mar 28 2026

Each furniture bun foot leg has passed a quality control process to ensure that you receive a product with superior craftsmanship. Thick slide on the bottom making it easier to move furniture around. Thread hanger bolt for fast and easy installation on furniture. The feet add a decorative accent to any furniture. They make an excellent choice to restoring and providing a different appearance to any furniture. To coordinate your desired finish, the bun feet are unfinished, smoothly sanded and ready for painting or staining. Each set of 4 comes with 4 free insert nuts and a drill bit.

These round bun furniture legs were easy to paint and install, as they come in a standard size.. Aaron. Saint Paul, MN. Sun Apr 19 2026

Versatile and durable, these solid wood furniture legs are perfect for replacing or upgrading feet on various furniture pieces, including sofas, couches, beds, ottomans, chairs, dressers, and cabinets. Their rich brown walnut finish adds a warm, elegant touch to any interior design.

Fitted perfectly!. Anonymous. Wed Feb 25 2026

Each mid-century furniture wood leg has passed a quality control process to ensure that you receive a product with superior craftsmanship. American Pro Decor's solid hardwood furniture legs come with a felt bottom to provide floor protection. Most importantly, they have a pre-installed 5/16 in. -18 in. thread hanger bolt for fast and easy installation on furniture. Mid-century wood legs add a decorative accent to couches, sofas, ottomans, loveseats, beds, cabinetry, end tables, bedside tables, and more. They also make an excellent choice for restoring antique furniture or updating the look of an old piece. To coordinate your desired finish, our wooden legs are Unfinished, smoothly sanded, and ready for painting or staining.

Excellent quality chair legs. I bought these so that I could stain them the exact same color of my desk. Turned out great. Only issue was that the attached screws aren't the same width as the original screws/hardware on my chair, so it’s taking a bit more work to get them attached to the chair.. Katie. Beaverton, OR. Thu Jun 25 2026

Approximate dimensions. Height: 4" (excluding 3/8" glide). Top width: 3-1/4". Distance from hanger bolt to edge of leg: 1-5/8". Bottom width: 1". Material type: Hardwood. Please consider the "distance from the hanger bolt to the edge of the leg". If you do not wish the sofa leg to protrude from under your furniture item, please ensure the "distance from hanger bolt to the edge of the leg" does not exceed the distance from your hanger bolt attachment point to the edge of your sofa. Our sofa legs are not just for the sofa. Your entire sofa, chair, ottoman, and other furniture pieces rest on the leg. If the leg is loose or defective, the result can be uncomfortable. Defective legs can lead to structural damage to the furniture because of uneven stress loads being placed on the frame. The well-being of your furniture needs to keep the legs in good repair. Even if your legs are still in good condition, you may wish to add new legs for function or appearance's sake. Purchasing taller legs than those that are presently installed will raise the height of the furniture from the floor, and of course, shorter legs will lower the height. An easy cost, effective way to alter the style of your furniture is with the installation of new legs. Each leg is installed with a hanger bolt and is easy to remove and attach. The leg is simply turned to the left to remove and to the right to install. Choosing the correct hanger bolt size is vital to ensure a correct fit. There are three available sizes of hanger bolts. Please carefully check the hanger bolt size on your present leg to ensure that your new legs will be compatible. The 5/16" bolt is the most common size, especially in American-made furniture. M8 (8mm) bolts are typically seen on Swedish furniture, as well as some other imported items. M10 (10mm) is seen on other European imports, especially those from Italy. You can reference the images for the difference between the 5/16" and M10 bolts. 5/16" and M8 look almost the same, with the difference being the type of thread. Be sure to check the fit with a bolt or nut, and not just with a tape measure or ruler. The three sizes of hanger bolts are not cross-compatible, so please check carefully before ordering. If you are uncertain which size hanger bolt you need, please call for assistance. We also offer a hanger bolt fit test kit that provides you the opportunity to test an actual 5/16", metric M8 hanger bolt, and a metric M10 hanger bolt to determine which fits your needs. Please note that wood grows in a forest in the form of trees; it is not manufactured in a factory like plastic. As a result, every leg is unique with naturally occurring variations in color, texture, and grain pattern. These distinguishing features contribute highly to why wood is sought after as a material for sofa legs and fine furniture. Because wood is a natural material, each may differ slightly from the photographic representation shown on the website.

Set of 4. Frosted Black Finished High quality material,made by steel. Special design,make your sofa more special than others. Well welding,you can not see the welding spot from outside the legs,best for DIY your favorite high quality sofas,ottoman,cabinets,or Chairs.

Miriam Rafaela. Oshawa, ON. Mon Apr 13 2026

This 2-piece set of dining chairs features a tall spindle back, rounded bow design, and turned legs for a classic silhouette in your space. Crafted entirely from solid rubberwood, each chair includes cross-stretchers between the legs to provide a stable, balanced foundation for daily meals. The armless design makes it easy to slide these side chairs completely under your table top to maximize floor space when not in use. Plus, the contoured seat offers a supportive base that encourages comfortable seating during long family dinners.

Beautiful chairs! Sturdy and made from real wood. Easy to assemble - just make sure you’re following the directions and wait until the end to tighten all the bolts. Looks timeless and chic!. Anonymous. Mon Aug 31 2026

Each furniture Bun Foot leg has passed a quality control process to ensure that you receive a product with superior craftsmanship. American Pro Decor's Bun feet furniture legs come with a 1/4 in. Thick slide on the bottom making it easier to move furniture around. Most importantly, they have a pre-installed 5/16 in. -18 in. thread hanger bolt for fast and easy installation on furniture. Bun feet add a decorative accent to any furniture. They make an excellent choice to restoring and providing a different appearance to any furniture. To coordinate your desired finish, our Bun feet are Unfinished, smoothly sanded and ready for painting or staining.

Michelle. Wake Forest, NC. Sun Jun 21 2026

Each furniture Bun Foot leg has passed a quality control process to ensure that you receive a product with superior craftsmanship. American Pro Decor's Bun feet furniture legs come with a 1/4 in. Thick slide on the bottom making it easier to move furniture around. Most importantly, they have a pre-installed 5/16 in. - 18 in. thread hanger bolt for fast and easy installation on furniture. Bun feet add a decorative accent to any furniture. They make an excellent choice to restoring and providing a different appearance to any furniture. To coordinate your desired finish, our Bun feet are Unfinished, smoothly sanded and ready for painting or staining.

Each furniture bun foot leg has passed a quality control process to ensure that you receive a product with superior craftsmanship. American Pro Decor's bun feet furniture legs come with a 1/4 in. thick slide on the bottom making it easier to move furniture around. Most importantly, they have a pre-installed 5/16 in. - 18 in. thread hanger bolt for fast and easy installation on furniture. Bun feet add a decorative accent to any furniture. They make an excellent choice to restoring and providing a different appearance to any furniture. To coordinate your desired finish, our bun feet are unfinished, smoothly sanded and ready for painting or staining.

Each furniture Bun Foot leg has passed a quality control process to ensure that you receive a product with superior craftsmanship. American Pro Decor's Bun feet furniture legs come with a 1/4 in. Thick slide on the bottom making it easier to move furniture around. Most importantly, they have a pre-installed 5/16 in. -18 in. thread hanger bolt for fast and easy installation on furniture. Bun feet add a decorative accent to any furniture. They make an excellent choice to restoring and providing a different appearance to any furniture. To coordinate your desired finish, our Bun feet are Unfinished, smoothly sanded and ready for painting or staining.

Just as pictured - heavy duty. Worked perfectly. Jana. West Jefferson, NC. Sun May 24 2026

Each furniture Bun Foot leg has passed a quality control process to ensure that you receive a product with superior craftsmanship. American Pro Decor's Bun feet furniture legs come with a 1/4 in. Thick slide on the bottom making it easier to move furniture around. Most importantly, they have a pre-installed 5/16 in. -18 in. thread hanger bolt for fast and easy installation on furniture. Bun feet add a decorative accent to any furniture. They make an excellent choice to restoring and providing a different appearance to any furniture. To coordinate your desired finish, our Bun feet are Unfinished, smoothly sanded and ready for painting or staining.

Each furniture bun foot leg has passed a quality control process to ensure that you receive a product with superior craftsmanship. Thick slide on the bottom making it easier to move furniture around. Thread hanger bolt for fast and easy installation on furniture. The feet add a decorative accent to any furniture. They make an excellent choice to restore and provide a different appearance to any furniture. To coordinate your desired finish, the bun feet are unfinished, smoothly sanded, and ready for painting or staining. Each set of 4 comes with 4 free insert nuts and a drill bit.

Stellar! Looks just like the pictures. Unfinished but dense enough to not dent the slightest touch. Sanded and won’t cause splinters. Came with the drill bit (716”), screwbolt inserts, and foam pads (though, half of them came off when putting my couch back on my rug—easy to swap). The main thing did NOT come with it was the allen keyhex bit (516”) which I had to purchase separately. Overall, love them!. Anonymous. Wed Mar 04 2026

Approximate Dimensions: Height: 3" to 4", Width: 2-1/4", Material Type: Hardwood. This leg is attached to the furniture item with a M8 hanger bolt (other sizes available). Attachment and removal of the leg are easy. The leg is simply turned to the right to install and to the left to remove. This wooden leg is finished in a luxurious black finish. The wood is strong and durable and is equipped with a plastic adjustable glide on the bottom of the leg. The Adjustable Leg feature provides an easy way to adjust your furniture item to uneven floors. This will prevent the furniture item from "rocking" back and forth because of an uneven floor. Uneven floors can also stress the frame of a furniture item by causing it to flex as it tries to adjust to the uneven floor surface. There are three available sizes of Hanger Bolts. Please carefully check the hanger bolt size on your present leg to ensure that your new legs will be compatible. The M8 bolt is the most common size, especially in American-made furniture. M8 (8mm) bolts are typically seen in furniture and some other imported items. M10 (10mm) is seen in other European imports (Natuzzi, etc.) You can reference the picture above to see the difference between the 5/16" and M10 bolts by simply utilizing a Bic® pen. M8 and 5/16 look almost the same, with the difference being the type of thread. Be sure to check the fit with a bolt or nut, and not just with a tape measure. The three sizes of hanger bolts are NOT cross-compatible, so please check carefully before ordering. If you are uncertain which size Hanger Bolt you need, please call for assistance. Our sofa legs are not just for the sofa. They also fit well and look good on chairs, ottomans, and other furniture items. Your entire sofa, chair, ottoman, and other furniture pieces rest on the legs. If the leg is loose or otherwise defective, the result can be an uncomfortable use of the furniture. Defective legs can lead to structural damage to the furniture because of uneven stress loads being placed on the frame. It is important, not only for appearance's sake but also for the well-being of your furniture, to keep the legs in good repair. Even if your legs are still in good condition, you may wish to add new legs for functional or appearance reasons. Purchasing longer legs than are presently installed will raise the height of the furniture item from the floor. Of course, shorter legs will lower the height. An easy, cost-effective way to alter the style of your furniture is with the installation of new legs. There are many styles, colors, and finishes from which to choose. Please note that wood grows in a forest in the form of trees; it is not manufactured in a factory like plastic. As a result, every wooden chair leg is unique, with naturally occurring variations in color, texture, and grain pattern. The color and variation of the grain are one of the distinguishing features of wood, making it highly sought after as a material for sofa legs and fine furniture. Because wood is a natural material, each couch leg may differ slightly from the photographic representation shown on the website.

Each furniture Bun Foot leg has passed a quality control process to ensure that you receive a product with superior craftsmanship. American Pro Decor's Bun feet furniture legs come with a 1/4 in. Thick slide on the bottom making it easier to move furniture around. Most importantly, they have a pre-installed 5/16 in. -18 in. thread hanger bolt for fast and easy installation on furniture. Bun feet add a decorative accent to any furniture. They make an excellent choice to restoring and providing a different appearance to any furniture. To coordinate your desired finish, our Bun feet are Unfinished, smoothly sanded and ready for painting or staining.

Do you have a lot of wood furniture with only minor blemishes you do not want to throw out yet? Well, don't worry! Wood repair marker set will help you patch your furniture right up! This set includes 6 wood-colored marker pens to help you cover up smaller scratches and worn areas in no time! These wood stains provide the ultimate coverage, just color in the gap, and watch your furniture be restored in a matter of seconds! 6 markers that come in maple, oak, cherry, walnut, mahogany, and black color.

This is a nice set with several shades to mix and match. Looks like new.. Carole. St. Louis, MO. Thu May 28 2026

Hands-On Testing. Sometimes, there is just no substitute for hands-on examination and testing of a product before the purchase is made. Pictures and dimension specifications can only go so far and do so much. The Hanger Bolt Fit Test Kit provides the "Do-It-Yourselfer" the opportunity to test an actual 5/16", M8 metric hanger bolt, and M10 metric hanger bolt to determine which fits their furniture item. Thus, they can be assured they are ordering the correct size for their installation. What is Included? One 5/16" hanger bolt, one M8 Metric hanger bolt, and one M10 Metric hanger bolt are included in a sealed plastic bag. Each hanger bolt is clearly labeled so the purchaser will be able to easily determine which is which. 5/16" - 18, the most common size, especially in American-made furniture M8 x 1.25 (8mm), typically seen on Swedish furniture, as well as some other imported items M10 x 1.5 (10mm), seen on other European imports, especially those from Italy

I replaced the feet on my older bed frame with these seamlessly.. Brent. Opelika, AL. Mon Aug 18 2025

Each furniture bun foot leg has passed a quality control process to ensure that you receive a product with superior craftsmanship. Architectural Products by Outwater's Bun feet furniture legs come with a bottom felt slide on the bottom making it easier to move furniture around. Most importantly, they have a pre-installed 5/16 in. - 18 in. thread hanger bolt for fast and easy installation on furniture. Bun feet add a decorative accent to sofas, ottmans, cabinets, dressers, vanities, couches, arm chairs and more. They make an excellent choice to restoring and providing a different appearance to your furniture. To coordinate your desired finish, our Bun feet are Unfinished, smoothly sanded and ready for painting or staining.

These feet are sturdy and have a modern feel--just what we needed for our kingsize bed!. Bc. Santa Fe, NM. Tue Jul 11 2023

This 2-piece dining chair set brings timeless character and everyday functionality to your space. It's crafted from solid rubberwood, where each seat features a spindle Windsor back paired with integrated armrests for supportive seating during meals or conversations. The water-resistant and stain-resistant finish helps protect against everyday spills, so cleanup isn't a hassle. A clean-lined frame easily integrates with a range of table styles while maintaining a light, open profile. Plus, the stackable design allows you to neatly store extra seating whenever you need to save room.

Excellent quality and easy assembly. Chairs exceeded my expectation. Thank you!!. Julia. ID. Tue Sep 01 2026

Crafted from premium solid rubber wood for exceptional stability and long-lasting durability, these furniture legs feature a rich, elegant brown finish that enhances the aesthetic of any piece.

Crafted from premium rubber wood, these furniture legs are built to last. Known for its exceptional strength and durability, rubber wood ensures that these legs can support heavy furniture pieces, making them ideal for sofas, couches, cabinets, benches, and more. Enjoy long-lasting stability and reliability with every use.

Each furniture Bun Foot leg has passed a quality control process to ensure that you receive a product with superior craftsmanship. American Pro Decor's Bun feet furniture legs come with a 1/4 in. thick slide on the bottom making it easier to move furniture around. Most importantly, they have a pre-installed 5/16 in. to 18 in. thread hanger bolt for fast and easy installation on furniture. Bun feet add a decorative accent to any furniture. They make an excellent choice to restoring and providing a different appearance to any furniture. To coordinate your desired finish, our Bun feet are Unfinished, smoothly sanded and ready for painting or staining.

They are well made just a bit to dark for my existing furniture.. Susan. Atascadero, CA. Sat Apr 18 2026

These mounting plates can help strengthen and/or repair new or existing furniture by attaching them to the bottom of the furniture frame. The 5/16-18" bolts, pre-installed in our new furniture legs and feet, will fit perfectly into these top plates. Build, refinish, or update your tables, ottomans, sofas, seating, and more by installing mounting plates and screwing in new legs & feet. Convert European furniture to accept a standard 5/16-18" US hanger bolt by screwing the plates over the existing hole in the furniture. Update or refurbish your existing furniture pieces with our mounting plates and new line of furniture feet & legs.

This American classic Windsor back chair is made of real oak wood and fully assembled by American experience workers.

These chairs are beautiful. Joanne. Lebanon, OR. Tue Jul 21 2026

Crafted from high-quality rubber, these bun feet provide exceptional durability and stability, making them ideal for a variety of wood furniture applications.

Introducing our Swivel Hooded PVC Ball Caster – the perfect blend of elegance and functionality for your furniture. With its captivating antique brass finish, this caster adds a touch of sophistication to any space, enhancing the overall aesthetic of your home or office. Measuring 2" in diameter, its sturdy construction ensures long-lasting durability, making it a reliable choice for everyday use. The smooth swivel action allows for effortless mobility, offering 360-degree rotation to glide smoothly in any direction. Worried about scratches? Fear not! The soft PVC ball protects delicate flooring like hardwood and tile, preserving their pristine condition. Installation is a breeze with the 7/16" x 1-3/8" friction ring stem, ensuring a secure and hassle-free attachment to your furniture. Elevate your furniture's style and functionality with our Antique Brass Swivel Hooded PVC Ball Caster – a timeless addition that promises to revitalize your living and working spaces.

They work and look great.. Anonymous. Mon Feb 23 2026

Crafted from high-quality solid wood, these furniture bun feet provide exceptional durability and sturdiness, ensuring long-lasting support for your furniture.

Brushed Satin Nickel Finished.Set of 4. High quality material,made by steel.Surface is very smooth. Well welding,best for DIY your favorite high quality sofas,ottoman,cabinets,or Chairs.

Love these chairdresser legs. They really changed the way my accent chair looks and the weight that it supports.. Martin. Fredericksburg, VA. Mon Feb 09 2026

Round bun feet are an elegant addition to sofas, couches, armchairs, love seats, beds, and other furniture. Triple sanded for an ultra-smooth surface. Superior craftsmanship. Carefully inspected for quality assurance. Pre-attached plastic floor glide thick makes it easier to rearrange the furniture. Supplied with the pre-attached threaded stem. Made of solid North American Hardwood. Unfinished and ready for paint or stain.

we used these to dress up a home made kitchen island left to us by the former owner of the home we purchased. the island is a repurposed vintage dresser and putting these feet on it made a world of difference. we added a low shine stain to it which made them even more 'finished' looking. worth the investment and met our needs perfectly. Karen. NB. Tue Oct 17 2023

Approximate Dimensions: Height: 3" to 4", Width: 2-1/4", Material Type: Hardwood. This leg is attached to the furniture item with a 5/16" hanger bolt (other sizes available). Attachment and removal of the leg are easy. The leg is simply turned to the right to install and to the left to remove. This wooden leg is finished in a luxurious black finish. The wood is strong and durable and is equipped with a plastic adjustable glide on the bottom of the leg. The Adjustable Leg feature provides an easy way to adjust your furniture item to uneven floors. This will prevent the furniture item from "rocking" back and forth because of an uneven floor. Uneven floors can also stress the frame of a furniture item by causing it to flex as it tries to adjust to the uneven floor surface. There are three available sizes of Hanger Bolts. Please carefully check the hanger bolt size on your present leg to ensure that your new legs will be compatible. The 5/16" bolt is the most common size, especially in American-made furniture. M8 (8mm) bolts are typically seen in furniture and some other imported items. M10 (10mm) is seen in other European imports (Natuzzi, etc.) You can reference the picture above to see the difference between the 5/16" and M10 bolts by simply utilizing a Bic® pen. M8 and 5/16 look almost the same, with the difference being the type of thread. Be sure to check the fit with a bolt or nut, and not just with a tape measure. The three sizes of hanger bolts are NOT cross-compatible, so please check carefully before ordering. If you are uncertain which size Hanger Bolt you need, please call for assistance. Our sofa legs are not just for the sofa. They also fit well and look good on chairs, ottomans, and other furniture items. Your entire sofa, chair, ottoman, and other furniture pieces rest on the legs. If the leg is loose or otherwise defective, the result can be an uncomfortable use of the furniture. Defective legs can lead to structural damage to the furniture because of uneven stress loads being placed on the frame. It is important, not only for appearance's sake but also for the well-being of your furniture, to keep the legs in good repair. Even if your legs are still in good condition, you may wish to add new legs for functional or appearance reasons. Purchasing longer legs than are presently installed will raise the height of the furniture item from the floor. Of course, shorter legs will lower the height. An easy, cost-effective way to alter the style of your furniture is with the installation of new legs. There are many styles, colors, and finishes from which to choose. Please note that wood grows in a forest in the form of trees; it is not manufactured in a factory like plastic. As a result, every wooden chair leg is unique, with naturally occurring variations in color, texture, and grain pattern. The color and variation of the grain are one of the distinguishing features of wood, making it highly sought after as a material for sofa legs and fine furniture. Because wood is a natural material, each couch leg may differ slightly from the photographic representation shown on the website.

Each mid-century furniture wood leg has passed a quality control process to ensure that you receive a product with superior craftsmanship. American Pro Decor's solid hardwood furniture legs come with a felt bottom to provide floor protection. Most importantly, they have a pre-installed 5/16 in. -18 in. thread hanger bolt for fast and easy installation on furniture. Mid-century tapered square legs add a decorative accent to couches, sofas, ottomans, loveseats, beds, cabinetry, and more. They also make an excellent choice for restoring antique furniture or updating the look of an old piece. To coordinate your desired finish, our wooden legs are Unfinished, smoothly sanded, and ready for painting or staining.

Very nice quality and everything you need is all together. Made putting new legs on a loveseat less challenging. Used these on 2 separate projects. Packaged nicely. Dnet. NY. Tue May 26 2026

Each furniture Bun Foot leg has passed a quality control process to ensure that you receive a product with superior craftsmanship. American Pro Decor's Bun feet furniture legs come with a 1/4 in. Thick slide on the bottom making it easier to move furniture around. Most importantly, they have a pre-installed 5/16 in. to 18 in. thread hanger bolt for fast and easy installation on furniture. Bun feet add a decorative accent to any furniture. They make an excellent choice to restoring and providing a different appearance to any furniture. To coordinate your desired finish, our Bun feet are Unfinished, smoothly sanded and ready for painting or staining.

Set of 4 4''H,Frosted Black Finished High quality material,made by steel. Special design,make your sofa more special than others. Well welding,you can not see the welding spot from outside the legs,best for DIY your favorite high quality sofas,ottoman,cabinets,or Chairs.

From finishes that are guaranteed to last a lifetime to faucets that perfectly balance your water pressure, Moen sets the standard for exceptional beauty and reliable, innovative design. Bring elegance to your home with premium selections from Moen. From the sophistication of period traditional to the streamlined refinement of minimalist contemporary, you'll find a host of amazing ways to express your style with products from Moen.

Works for my application.. Susan. Centerville, OH. Fri Mar 22 2019

Bun feet are an elegant addition to sofas, couches, armchairs, love seats, beds, and other furniture. Triple sanded for an ultra-smooth surface. Superior craftsmanship. Carefully inspected for quality assurance. Pre-attached plastic floor glide thick makes it easier to rearrange the furniture. Made of solid North American Hardwood.

Amanda. Tupelo, MS. Sat Nov 29 2025

Sofa, couch, or chair legs can get worn, scratched, and dated. An inexpensive leg replacement can update and revitalize your furniture and room. Give your sofa, couch, or chair a new look at a budget price. Height: 3 inches, Top Width: 2 inches, Bottom Width: 1-3/4 inches, Material Type: HDPE (High Strength High-Density Poly Ethylene Plastic), Wood Pattern Finish These Leg Daddy Sofa Legs feature a 5/16" Hanger Bolt so they easily attach to your sofa, couch, chair, ottoman, or loveseat and replace your existing legs or feet. If your sofa uses M10 (Metric 10mm) bolts, T-Plates allow you to use standard 5/16" (sold separately). Because T-Nuts can become damaged or lost, we recommend purchasing a matching set of T-Plates with your sofa legs. (T-Plates are used when the sofa is so damaged that a T-Nut will not attach.)

Very sturdy perfect for my needs to replace the others I had on the sofa. Maryse. Palm Desert, CA. Sat Jan 03 2026