Floor Tile Sealer

The Armor AR350 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable low gloss surface film. The Armor AR350 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a low gloss wet-look finish. The Armor AR350 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective low gloss film will reduce damage and deterioration caused by surface abrasion and water absorption, including cracking, spalling, pitting, dusting, mold, mildew, and algae growth.

Good sealer for concrete driveway. Robert. Butte, MT. Thu Apr 02 2026

The Armor AR500 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AR500 is a fantastic sealer if you are looking to bring out dull and faded surfaces, and enhance surfaces with a high gloss wet look finish.The Armor AR500 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Fantastic sealer. Anonymous. Thu Apr 16 2026

The Armor AR350 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable low gloss surface film. The Armor AR350 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a low gloss wet-look finish. The Armor AR350 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective low gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

very happy with the price for the product was kept well inform about were was the product at certain time and it was well package. Richard. Brampton, ON. Fri Jul 24 2026

The Armor AR500 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AR500 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a high gloss wet-look finish. The Armor AR500 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Seals great and gives the surface a nice shine!. Bobbi. Evans City, PA. Mon Jun 15 2026

The Armor SX5000 WB is a PRO-Grade water-based penetrating water-repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. The Armor SX5000 WB is made from high-quality, non-recycled, US-manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

I’ve got a fairly long and steep concrete driveway that is starting to show its age a little bit. There has been some minor cracking from the freeze-thaw cycle each winter. I decided to try the Armour SX5000 water-based sealant to see if it would improve the situation. I have delayed writing this review for a bit as I wanted to driveway to go through at least one winter season. I first pressure washed the entire driveway surface which is pretty time consuming. I then applied the Armour sealant with a manual pump sprayer. This part went fairly quickly. The trick is to get the sealant covering the driveway well, but not so much as to create puddles that aren’t absorbed. I made sure there was no rain in the forecast for a couple of days. Initially, I did half of the driveway first and the first day that it rained the difference on the two sides was very noticeable. Water on the coated side was beading and running off and on the other side it was being absorbed into the concrete. My driveway has now gone through two winters and the sealant is still somewhat effective, but I think I will need to coat it again this fall.. Bryan. Halifax, NS. Fri Mar 27 2026

The Armor AG BROWN SEAL is a solvent-based acrylic sealer designed to enhance, seal, and protect exposed aggregate concrete surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss brown-tinted surface film. The Armor AG BROWN SEAL is a fantastic sealer if you are looking to bring out dull and faded exposed aggregate concrete, and enhance them with a brown-tinted high gloss wet look finish.The Armor AG BROWN SEAL is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Amazing coverage for our aggregate sidewalk. The sealer not only lives up to harsh winters here in the North, but is amazingly beautiful in the summer! This is the only product we will buy for our concrete need.. Johna. Pittsburgh, PA. Mon Sep 11 2023

Ultimate nano floor finishes with nanoformulation technology - a medium sheen penetrating topical. A protective nano-thin coating that creates a durable, crystal clear finish specifically designed to bond to the micro-pores of today’s porcelain tiles, LVT, and more. This new AC technology has the easiest, safest, and fastest application in the industry, is self-leveling, and protects against spills and stains. It also enhances the beauty of any porcelain, ceramic, and LVT tile colors and patterns while leaving a desirable medium sheen finish. This will also seal the grout joints and make for easy, fast, and effortless maintenance of the floor.

This is amazing. I used it to install vinyl tile and it make the job so much easier. Simple to use and extremely affective. I highly recommend this for any job you have with vinyl flooring.. Cecelia. Watertown, NY. Fri Jun 12 2026

The Armor WL550 is a penetrating, matte wet look water repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption. It will darken the surface to slightly enhance any dull and faded coloring. The Armor WL550 is made from high-quality, non-recycled, US-manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and masonry. It works entirely below the surface and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

Worked well and water beads on marble lanai and pool deck pavers. It is not matte but more of a low gloss that I expect to dull from the sun.. Mark. Sw Florida. Thu Mar 14 2024

Ultimate Porcelain Tile Sealer with Hybrid Formulation Technology is a VOC-compliant, easy-to-use, fast-curing sealer for all porcelain tiles. Use before grouting to protect the micro-pores of porcelain tiles from staining during the grouting process and to make the grout cleanup much easier and faster. Use after installation to help keep the tiles clean, easier to maintain, and looking like new for years to come. Easy wipe-on application!

Top. Sandy. Fresno, TX. Fri Mar 20 2026

This works well with Mannington Audra Flex.. Kathryn. Xenia, OH. Mon Jun 08 2026

The Armor WB15 is a water-based acrylic sealer designed to seal and protect concrete and paver surfaces with a durable low gloss surface film. The Armor WB15 is a fantastic sealer if you are looking to enhance surfaces with a low gloss finish.The Armor WB15 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective low gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

The folks at Foundation Armor were very helpful in helping us find a low gloss sealer for our stamped concrete. We applied 2 coats and it came out looking great.. Anonymous. Pembroke New Hampshire. Sat May 06 2023

Ultimate porcelain tile sealer with hybrid formulation technology is a VOC-compliant, easy-to-use, fast-curing sealer for all porcelain tiles. Use before grouting to protect the micro-pores of porcelain tiles from staining during the grouting process and to make the grout cleanup much easier and faster. Use after installation to help keep the tiles clean, easier to maintain, and looking like new for years to come. Easy wipe-on application!

Good quality. Edith. Sun Dec 22 2024

The Armor WL550 is a penetrating, matte wet look water repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption. It will darken the surface to slightly enhance any dull and faded coloring. The Armor WL550 is made from high-quality, non-recycled, US-manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

Used this WL550 sealer on a powerwashed 20+ year old patio. This product did a good job reviving some color without the fake looking shine of sealers with glossy finishes. I wouldn't call it a 100% "wet look' when done -- would have preferred a little darker -- but given the age of the patio, the results were pretty good. I used about 2 1/3 gallons to cover 365 sq ft using a pump sprayer. Product had a strong odor, but it dissipated soon after the job. Haven't yet evaluated the sealing properties, but my main purpose was to improve the look.. Debra. Arlington Heights, IL. Sun Jun 02 2024

The Armor AX25 combines two great products into one! With the AX25, you get a penetrating water repellent sealer, and a high gloss acrylic coating - all packed into one amazing product!The Armor AX25 is a solvent-based siloxane-infused acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AX25 is a fantastic sealer if you are looking to bring out dull and faded surfaces, enhance surfaces with a high gloss wet look finish, and provide superior water repellency benefits to the surface. The Armor AX25 also doubles as a cure and seal and can be applied to new concrete.The Armor AX25 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Bought AX-25 to reseal my pool deck and lanai. This stamped concrete deck has to be resealed every 2-3 years. Used tint from another company (very good stuff). However, I decide to give Foundation Armor a try for sealing. I am very pleased and find this to give a better appearance than the sealant I used before from the tint provider. Gloss seems much brighter and just seemed to go down easier. Of course it will a year or two before I know for sure, but so far it looks great.. Rosetejas. Se Texas. Wed Jul 12 2023

The QEP 20 in. Ceramic and Porcelain Tile Cutter cuts a variety of wall and floor tiles. The solid, chrome-plated steel rails offer smooth scoring, while the welded center breaker beam and level foam side pads provide clean cuts and a level surface. This cutter also includes an adjustable rip guide designed to help make repetitive cuts in tile faster and easier.

Works well and cut 13” porcelain tile without issue!. Mariah. IA. Tue May 26 2026

The Armor WB25 is a water-based acrylic cure and seal designed to enhance, seal, and protect concrete and paver surfaces. It will protect the surface with a durable high gloss surface film. The Armor WB25 is a fantastic sealer if you are looking to enhance surfaces with a high gloss finish. The Armor WB25 also doubles as a cure and seal and can be applied to new concrete.The Armor WB25 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Great product. Ron. Niagara Falls, NY. Sat Jan 21 2023

The Armor SC25 is a fast-acting cost-effective penetrating water repellent sealer specifically formulated for white, or very light unsealed concrete surfaces. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. The Armor SC25 is made from high quality, non-recycled, US manufactured resins. It is designed for unsealed white and very light concrete. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

Love it. Stef Newman. Clifton, TX. Mon Jun 07 2021

ULTIMATE NANO FLOOR FINISH with NANO FORMULATION TECHNOLOGY - A medium sheen penetrating topical. A protective nano-thin coating that creates a durable, crystal clear finish specifically designed to bond to the micro-pores of today’s porcelain tiles, LVT, and more. This new AC Technology has the easiest, safest and fastest application in the industry, is self-leveling, and protects against spills and stains. It also enhances the beauty of any porcelain, ceramic, and LVT tiles colors and patterns while leaving a desirable medium sheen finish. This will also seal the grout joints and make for easy, fast, and effortless maintenance of the floor.

Linda. Elkins, WV. Thu Aug 06 2026

Stretch carpet during installation with the ROBERTS® 8-Piece Junior Power Carpet Stretcher Kit. The 10-237 is an ideal power stretcher for professional installers. The adjustable pin depth setting makes this unit compatible with all carpet thicknesses. The non-marring tail block facilitates quick and safe stretching, with no need for a 2 x 4 plank. This kit stretches carpet up to 23.5 ft. and includes the ROBERTS 10-250 Adjustable Locking Tube for fast incremental adjustments. The rolling carrying case includes clips for stacking and fastening ROBERTS Extension Tube Cases, sold separately.

ROBERTS 7350 is a high-quality, high-solids formulation for installation of resilient flooring and vinyl-backed carpet tile. This acrylic latex, pressure-sensitive adhesive has tremendous bond and shear strength, making it ideal for use with large format vinyl tiles. It has excellent moisture and plasticizer migration resistance for demanding commercial installations. Powered by Microban®, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation. ROBERTS 7350 can be used to adhere specialty vinyl flooring underlayment, plus homogeneous and heterogeneous sheet flooring.For interior use only, dry time may vary with temperature, humidity and porosity of substrate. Made in the USA.

Ultimate High Gloss Sealer- A high gloss topical protective coating that creates a durable, crystal clear finish on the slate, saltillo, concrete pavers, and more. This new AC Technology has the easiest, safest and fastest application in the industry, is self-leveling, and penetrates the substrate to protect against oil and water-based stains.

Definitely high gloss. Works well for my application.. Prue. Connecticut. Thu May 07 2026

The Dapper Supply Mini Automatic Floor Scrubber is the perfect solution for small commercial spaces that demand powerful cleaning in a compact package. With a 15-inch cleaning width and 170 RPM brush speed, it effectively removes dirt and grime while covering up to 12,900 ft² per hour.Equipped with a 1.2-gallon solution tank and a 1.5-gallon recovery tank, this scrubber ensures efficient water usage and quick drying, thanks to its 17-inch squeegee and powerful 70W suction motor. The 24V battery system provides an impressive 90-minute runtime, allowing you to clean efficiently without interruptions.Designed with low-noise operation at just 65 dB, it’s perfect for offices, retail stores, restaurants, and other high-traffic areas where quiet cleaning is essential. Plus, its lightweight 22-pound design makes it easy to maneuver, transport, and store, even in tight spaces and narrow aisles.Dapper Supply stands behind the quality of its products with a full 1-year warranty, ensuring long-term reliability and professional-grade performance.Upgrade your cleaning routine with the Dapper Supply Mini Automatic Floor Scrubber – a powerful, portable, and efficient cleaning solution for professional results.

This little floor machine works awesome I use it for my commercial cleaning services. My clients floor looks amazing I am thinking of buying another one soon. Sharon. Troutman, NC. Wed Jun 24 2026

The QEP Wet Tile Saw is ideal on job sites where space prohibits the use of a large wet saw. The 3/5 HP, high-torque motor and included 4 in. continuous rim diamond blade cuts through unlimited sizes of ceramic, marble, slate and stone tile up to 3/4 in. thick. This tile saw even cuts mosaic tile and backsplash tile for DIY projects. The water system not only reduces water runoff, it recycles the water back into the reservoir, minimizing refill frequencies. This dependable wet saw includes dual extension tables to support larger tiles and a hinged cutting table for miter cuts. A 4 in. blade with a 5/8 in. arbor is required. For cutting porcelain and hard tiles, we recommend using the QEP Black Widow Blade, sold separately.

Good little device. Anonymous. Thu Oct 23 2025

The Armor AG BROWN SEAL is a solvent-based acrylic sealer designed to enhance, seal, and protect exposed aggregate concrete surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss brown-tinted surface film. The Armor AG BROWN SEAL is a fantastic sealer if you are looking to bring out dull and faded exposed aggregate concrete, and enhance them with a brown-tinted high gloss wet look finish.The Armor AG BROWN SEAL is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Excellent product. Used it to seal our curbing. Perfect color and added the wet look like it says. Anonymous. Thu Apr 30 2026

QBond-One is an installer-friendly adhesive for sheet and LVT flooring installation. This solvent-free adhesive offers excellent initial grab, extremely easy troweling or rolling, and changes to clear when dry to make flooring installations easy. Clean up is simple and fast.

love the product. Great adhesion once its set up.. Valerie. Pierre, SD. Fri Apr 24 2026

The QEP 8" razor floor stripper removes old tile, adhesive, vinyl, carpet, and other floor-covering materials. The twist-lock, telescoping handle adjusts from 36" to 72" for a variety of work situations. Cushioned grip for comfort.

Works well. Just disappointed with the handle which loosens easily.. Janice. Palm Beach Gard, FL. Thu Jul 24 2025

【24 inch Tile Cutter】 Our manual tile cutter is a powerful and professional hand tool to meet your needs, with single rail and double brackets. It's able to cut up to 1000mm in length and 6-15mm in thickness. It's capable of cutting ceramic tiles and porcelain tiles. Equipped with infrared ray device, the ceramic tile cutter offers preciser cutting. Rubber handle provides better using experience.

This worked great for my kitchen tile project!! Great option versus a wet saw for my stone tile. Tina. US. Thu Feb 20 2025

Floor Scrubber:Powered by a 0.75 HP commercial motor, this floor scrubber machine delivers professional cleaning. One machine does it all—cleaning tough stains on tile and wood floors. With a full set of professional brush heads and a labor-saving design, it easily handles various cleaning needs, achieving professional-grade cleaning results.

This machine is amazing cleans so easy in my home Cleans up wood floors very nicely definitely worth the price. Stephen. Tue Jul 14 2026

RevoTile RAPIDGROUT is our single-component flexible grout designed specifically for clicking titles Select from our grout colors and install on the same day. No waiting. Finished 2X faster than regular tile. RevoTile RAPIDGROUT is a premium, pre-mixed water-based flexible grout offering the ultimate in color accuracy, water resistance, and stain, and cracks protection. No sealing is required.

Beautiful for my new stone tile!. Laversia. Sun Nov 19 2023

The Armor WB25 is a water-based acrylic cure and seal designed to enhance, seal, and protect concrete and paver surfaces. It will protect the surface with a durable high gloss surface film. The Armor WB25 is a fantastic sealer if you are looking to enhance surfaces with a high gloss finish. The Armor WB25 also doubles as a cure and seal and can be applied to new concrete.The Armor WB25 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

best ever. John. North Olmsted, OH. Thu Jun 03 2021

Are you still using traditional tools to fill the gaps? It is very troublesome to use and the filling effect is not satisfactory. The two nozzles of this caulking machine can fill gaps and holes, the large-capacity hopper reduces the trouble of adding materials all the time, making it an ideal tool for families and professional construction teams. Voltage: 110V Power: 700W Material: Stainless Steel and Plastic Size: About 51x 23x 40cm/20x 9.1x 15.7 inches Mortar Hopper Diameter: 23cm/9.1 inches Mortar Hopper Height: 19cm/7.5 inches Nozzle Diameter: 20mm(Round), 26mm(Flat)

Bring professional-level floor care to your facility with this 20" High-Speed Commercial Floor Burnisher. Built for demanding environments, it features a powerful 1.5 peak horsepower, 1800-watt motor that spins at 1500 RPM to deliver a brilliant shine on finished floors quickly and efficiently. The included set of pads makes it easy to tackle any job — use the red pad for light cleaning and gloss restoration, the white pad for high-speed polishing to a mirror finish, or the black pad for stripping away wax, finish, and heavy buildup. Designed with the operator in mind, it includes rear wheels for easy tilt-and-roll transport, an extra-long 40-foot power cord for wide reach, and a safety lock-out switch with thumb control for convenient and secure operation. A rubber bumper guard protects walls and furniture while you work, ensuring your space stays damage-free. this burnisher is the reliable, high-performance solution for commercial floor maintenance.

Epoxy Elite EVO Acid-resistant 2-part epoxy mortar for the installation and grouting of ceramic tiles and mosaics with 1/32” to 5/8” (1 to 15 mm) joints. For virtually all areas of application, indoor and outdoor floors and walls, also rated for pool and steam environments. Product with ultra-low emission of volatile organic substances (VOC) the ZHERORISK formulations provides an innovation which are safer for the installer, the jobsite and have no transportation or environmental negatives like all of the other epoxy grouting products. Innovative new approach to Epoxy Mortar that enables a smoother matt finish. Epoxy Elite EVO is a commercial product that can be used as a non-sag setting material and grouting product. Extremely easy to install and maintain (follow specific instructions for this product). 2-part anti-acid epoxy mortar. Part A consists of a mixture of epoxy resin, fine-grain siliceous aggregates, pigments and specific organic additives. Component B consists of an innovative organic catalyst. The 2 parts, once mixed together at room temperature will have a full 60 minutes of application and cleaning time, and forms a creamy mixture with excellent smoothness, also for no-drip vertical application. Once hardened, the product has ultra-high performance in terms of mechanical and chemical resistance. The grout is industrial grade performance even when subjected to enzymatic cleaners and other harsh environments. When applying grout to tile we recommend using The Tile Doctor Green Epoxy Float. This float is specially designed to spread grout into joints when grouting tile with epoxy-based grout.

This product is the best. The absolute best ! Sure it's expensive but well worth it.. Monique. QC. Sun Dec 21 2025

253 Gold is a superior polymer fortified bagged cementitious thin-set powder to be mixed with water to install ceramic tile and natural stone using the thin-set method of installation. Designed for interior and exterior floor and wall installations of all types of ceramic tiles, porcelain tile and stone over concrete, exterior glue plywood, and a variety of substrates.

Ultimate High Gloss Sealer- A high gloss topical protective coating that creates a durable, crystal clear finish on the slate, saltillo, concrete pavers, and more. This new AC Technology has the easiest, safest and fastest application in the industry, is self-leveling, and penetrates the substrate to protect against oil and water-based stains.

I like the product worked great. Cindy. Arcadia, FL. Wed Mar 09 2022

QEP 7 in. Wide Floor Scraper and Stripper features a 48-inch long handle with a foot peg that provides better leverage on tough projects. Manufactured with a high-carbon steel blade, it effectively rips up concrete, marble, ceramic tile, wood floors, roofing, asphalt, and tile. Its solid, welded construction gives this scraper and stripper superior stability and toughness. It includes one high carbon steel blade and uses QEP 7 in. Scraper Replacement Blade Model QEP1289, sold separately.

The floor scraper and stripper is much smaller than expected, and I am sure it will still work fine.. Payne. IN. Sat Dec 06 2025

Tile And Ceramic Repair Paste Ceramic Tile Repair Agent Ceramic Paste Marbled Floor Tile Repair Adhesive 60g

It’s Sunday morning, and you’re about to wash your SUV in the driveway before heading to brunch. Afterward, you pull into the garage, and instead of leaving a trail of soapy water and grime, you simply park on this mat. The raised edges catch every drop, and the mat stays perfectly flat under your tires. Later, you grab the included squeegee, push the water toward the drain in seconds, and your garage floor looks untouched. This is the kind of effortless, everyday protection that keeps your home cleaner and your weekends stress-free. Whether it’s winter slush or summer mud, you have one less thing to clean.

Jt. Petersburg, IL. Tue Sep 01 2026

Ultimate Cal Clean- Due to our new AC Technology Ultimate Cal Clean provides a safe, non-toxic, acid-free cleaner that will really break down and remove hard water spots, calcium build-up, and efflorescence from all kinds of surfaces such as glass, shower doors, ceramic and porcelain tile, sinks, faucets, pool tiles, grout, natural stone, masonry, metal and more.

Great product!! I have used many, but I find this one to be the best!!. Dorothy. North Scituate, RI. Thu Aug 12 2021

Make Your Flooring Projects Faster and Easier：Need a tool that lets you DIY your flooring cuts with ease? This floor cutter helps you finish renovation tasks quickly. It cuts boards up to 10 mm thick and works with PVC, LVT, VCT, rubber flooring, polyurethane flooring, and 8–10 mm laminate flooring. A practical tool for all your DIY flooring projects.

The Armor LV25 is a solvent-based acrylic cure and seal designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor LV25 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a high gloss wet-look finish. The Armor LV25 also doubles as a cure and seal and can be applied to new concrete. The Armor LV25 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Awesome product 2 coates and protected. I used this in the summer to seal stucco on my chimney and it really is armor against water damage. Can I give the sealer 6 stars?. Duke Of Babes. Wed Nov 13 2024

The Armor LV25 is a solvent-based acrylic cure and seal designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor LV25 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a high gloss wet-look finish. The Armor LV25 also doubles as a cure and seal and can be applied to new concrete. The Armor LV25 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Great product, high quality and speedy delivery. Anonymous. Tue Apr 14 2026

Reducer Ramp Profiles are uniquely designed for floating flooring systems and provides smooth, sloped transitions between flooring of different heights, offering edge protection while eliminating trip hazards. These profiles are ideal for heavy-duty and commercial applications, particularly in areas with high traffic and wheeled carts, such as showrooms, exhibition spaces, and retail environments.

For general wall and ceiling repair. Sets fast in 20-30 minutes without shrinking. Smooth and bubble free formula provides great results every time.

A one-step formula that cleans, shines and protects in a one-time and labor-saving step. This product is safe to use on Forbo Marmoleum products. It is also non-toxic, bio-degradable, and has no harsh chemicals.

This product imparts a greater gloss than Marmoleum has out of the box. I'd call it satin. We like the shine. Since it is a Forbo product it should be the most compatible treatment available. The instructions say it both cleans and shines though it makes sense to thoroughly sweep then clean the floor with mild detergent and water or the Forbo cleaner first. I avoid flooding the floor even though the click seal planks are supposed to be rated for kitchens and baths.. Dale. Port Townsend, WA. Tue Feb 03 2026

QEP's 14 in. Floor Surface Scraper and Stripper features a durable, 14-in. replaceable carbon steel blade to help you remove old floor applications and excess debris. The 5 ft. handle provides excellent leverage for tough jobs.

Bill. Regina, SK. Mon Dec 19 2022

My order was shipped and received very quickly. Items as described.. Grady. Rancho Cucamonga, CA. Wed Aug 12 2026